• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.225-231
• /
• 2020

Fresh water that can be used by a person of the total amount of water on the planet is increased because it is less than 0.01 % except underground water, ice and snow, etc. water management response need. In order to protect and efficiently utilize water resources, major countries are conducting water footprint studies that can quantitatively estimate the amount of water put into the operating phase of the resource harvesting phase, mainly agriculture. Korea has also recently developed a number of policies in order to cope with water shortages, and in the construction industry, as well as the need for basic research to support it has been emphasized. This study was constructed DB up to the raw material harvesting step, the transport step, the production stage in order to estimate the water consumption of resources to be put into the work process to target the drainage of the road. Water usage estimation method was utilized the method presented in the Water Footprint Manual and the environmental score card certification guide, unit water usage each drainage main method was calculated after estimating the water footprint considering the water character factor, indirect water and the direct water, the water consumption factor of material input to each process. Brown asphalt, rebar, remicon of the drainage material as a result of the water footprint calculation accounted for 97 % of the total. Drainage method is a culvert, a side channel, a culvert wing wall, reinforced concrete open channel accounted for 92.2 % of the total. Drainage total step-by-step calculated water consumption and water footprint was found in order of raw material harvesting step, transport stage, production stage. Water footprint each drainage method or total drainage material calculated in this study can be used as a base data in the agricultural and construction sectors. In order to increase the reliability of the analysis, it is believed that further overseas databases will be needed for continuous review and research.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.19 no.1
• /
• pp.4312-4322
• /
• 1977

In order to investigate the effect of the water content and the accelerated curing on the strength of the soil-cement mixtures, laboratory test of soil cement mixtures was performed at five levels of water content, four levels of accelerated curing temperatures, three levels of normal curing periods, and six levels of accelerated curing time. Also this study was carried out to investigate the effect of grain size distribution of 21 types of soils on the strength of soil-cement mixtures at four levels of cement content and three levels of curing time. The results are summarized as follows: 1. Optimum moisture content increased with increase of the cement content, but maximum dry density was changed ununiformly with cement content. Water content corresponding to the maximum strength was a little higher than the optimum moisture content along the increase of cement content. 2. In molding the specimens with the optimum moisture content, the maximum strength appeared at the wet side of the optimum moisture content. 3. According to increase of curing temperature as 30, 40, 50, and 60$^{\circ}C$, unconiiend compressive strength of soil-cement mixtures increased, the rate of increase at the early curing period was large, and approximately 120 hours was suifficient to harden soil-cement mixtures completely. 4. The strength of soil-cement mixtures at the curing temperature of 10$^{\circ}C$ decreased at the rate of 30 to 50 percent than at the curing temperature of 20$^{\circ}C$, and the strength of soil-cement mixtures at the curing temperature of 0$^{\circ}C$ increased a little with increase of curing time. 5. Although the strength of soil-cement mixtures seemed to be a little affected by the temperature difference between day time and night, it was recommended that reasonable working period was the duration from July to August of which average maximum temperature of Korea was approximately 30$^{\circ}C$. 6. Accelerated curing time corresponding to the normal curing time of 28-day was shorten with increase of curing temperature, also it was a little affected by the cement. Accelerated curing time that the strength of soil-cement mixtures for the cement of 9 percent and the curing temperature of 60was shorten with increase of curing temperature, also it was a little affected by the cement. Accelerated curing time that the strength of soil-cement mix- tures for the cement of 9 percent and the curing temperature of 60$^{\circ}C$ was 45 hours at the KY sample, 50 hours at the MH, 40 hours at the SS, and 34 hours at the JJ respectively. 7. Accelerated curing time was depended upon the grain size distribution of soil, it decreased with increase the percent passing of No. 200 sieve. 8. Relationship between the normal curing times and the accelerated curing times showed that there was a linear relationship between them, its slope decreased with increase of curing temperature. 9. The most reasonable soil of the soil-cement mixtures was the sandy loam which was a well graded soil. Assuming the base of road requiring 7-day strength of 21 kg/$\textrm{cm}^2$ being used, the soil-cement mixtures could be obtained with adding 6 percent of cement in such a sails S-7, S-8, S-9, S-10, S-11, S-12, S-13. 10. The regression equation between the 28-day and the 7-day strength was obtained as follow; q28=1.12q7,+6.5(r=0.96).

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.101-111
• /
• 2015

Stream restoration projects have become threats to riparian ecosystem in Rep. of korea. Riparian wildlife becomes isolated and the animals are often experience difficulties in crossing riparian corridors. The purposes of this study is to select suitable wildlife passages for wild animals crossing riparian corridors. Maximum entropy model and snow tracking data on embankment in winter seasons were used to develop species distribution models to select suitable wildlife passages for water deer. The analysis suggests the following. Firstly, most significant factors for water deer's habitat in area nearby riparian area are shown to distance to water, age-class, land cover, slope, aspect, digital elevation model, tree density, and distance to road. For the riparian area, significant factors are shown to be land cover, size of riparian area, distance to tributary, and distance to built-up. Secondly, the suitable wildlife passages are recommended to reflect areas of high suitability with Maximum Entropy model in riparian areas and the surrounding areas and moving passages. The selected suitable areas are shown to be areas with low connectivity due to roads and vertical levee although typical habitats for water deer are forest, grassland, and farmland. In addition, the analysis of traces on snow suggests that the water deer make a detour around the artificial structures. In addition, the water deer are shown to make a detour around the fences of roads and embankment around farmland. Lastly, the water deer prefer habitats around riparian areas following tributaries. The method used in this study is expected to provide cost-efficient and functional analysis in selecting suitable areas.

• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.35-61
• /
• 1978

To find out the power tiller's travel and tractive characteristics on the general slope land, the tractive p:nver transmitting system was divided into the internal an,~ external power transmission systems. The performance of power tiller's engine which is the initial unit of internal transmission system was tested. In addition, the mathematical model for the tractive force of driving wheel which is the initial unit of external transmission system, was derived by energy and force balance. An analytical solution of performed for tractive forces was determined by use of the model through the digital computer programme. To justify the reliability of the theoretical value, the draft force was measured by the strain gauge system on the general slope land and compared with theoretical values. The results of the analytical and experimental performance of power tiller on the field may be summarized as follows; (1) The mathematical equation of rolIing resistance was derived as $$Rh=\frac {W_z-AC \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\] sin\theta_1}} {tan\phi \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]+\frac{tan\theta_1}{1}$$ and angle of rolling resistance as $$\theta _1 - tan^1\[ \frac {2T(AcrS_0 - T)+\sqrt (T-AcrS_0)^2(2T)^2-4(T^2-W_2^2r^2)\times (T-AcrS_0)^2 W_z^2r^2S_0^2tan^2\phi} {2(T^2-W_z^2r^2)S_0tan\phi}\] $$and the equation of frft force was derived as$$P=(AC+Rtan\phi)\[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]cos\phi_1 \ulcorner \frac {W_z \ulcorner{AC\[ [1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]sin\phi_1 {tan\phi[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\]+ \frac {tan\phi_1} { 1} \ulcorner W_1sin\alpha $$The slip coefficient K in these equations was fitted to approximately 1. 5 on the level lands and 2 on the slope land. (2) The coefficient of rolling resistance Rn was increased with increasing slip percent 5 and did not influenced by the angle of slope land. The angle of rolling resistance Ol was increasing sinkage Z of driving wheel. The value of Ol was found to be within the limits of Ol =2\ulcorner "'16\ulcorner. (3) The vertical weight transfered to power tiller on general slope land can be estim ated by use of th~ derived equation: $$R_pz= \frac {\sum_{i=1}^{4}{W_i}} {l_T} { (l_T-l) cos\alpha cos\beta \ulcorner \bar(h) sin \alpha - W_1 cos\alpha cos\beta$$The vertical transfer weight $R_pz$ was decreased with increasing the angle of slope land. The ratio of weight difference of right and left driving wheel on slop eland,$\lambda= \frac { {W_L_Z} - {W_R_Z}} {W_Z} $, was increased from ,$\lambda$=0 to$\lambda$=0.4 with increasing the angle of side slope land ($\beta = 0^\circ~20^\circ) (4) In case of no draft resistance, the difference between the travelling velocities on the level and the slope land was very small to give 0.5m/sec, in which the travelling velocity on the general slope land was decreased in curvilinear trend as the draft load increased. The decreasing rate of travelling velocity by the increase of side slope angle was less than that by the increase of hill slope angle a, (5) Rate of side slip by the side slope angle was defined as $ S_r=\frac {S_s}{l_s} \times$ 100( %), and the rate of side slip of the low travelling velocity was larger than that of the high travelling velocity. (6) Draft forces of power tiller did not affect by the angular velocity of driving wheel, and maximum draft coefficient occurred at slip percent of S=60% and the maximum draft power efficiency occurred at slip percent of S=30%. The maximum draft coefficient occurred at slip percent of S=60% on the side slope land, and the draft coefficent was nearly constant regardless of the side slope angle on the hill slope land. The maximum draft coefficient occurred at slip perecent of S=65% and it was decreased with increasing hill slope angle $\alpha$. The maximum draft power efficiency occurred at S=30 % on the general slope land. Therefore, it would be reasonable to have the draft operation at slip percent of S=30% on the general slope land. (7) The portions of the power supplied by the engine of the power tiller which were used as the source of draft power were 46.7% on the concrete road, 26.7% on the level land, and 13~20%; on the general slope land ($\alpha = O~ 15^\circ ,\beta = 0 ~ 10^\circ$) , respectively. Therefore, it may be desirable to develope the new mechanism of the external pO'wer transmitting system for the general slope land to improved its performance.l slope land to improved its performance.

• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.34-34
• /
• 1978

To find out the power tiller's travel and tractive characteristics on the general slope land, the tractive p:nver transmitting system was divided into the internal an,~ external power transmission systems. The performance of power tiller's engine which is the initial unit of internal transmission system was tested. In addition, the mathematical model for the tractive force of driving wheel which is the initial unit of external transmission system, was derived by energy and force balance. An analytical solution of performed for tractive forces was determined by use of the model through the digital computer programme. To justify the reliability of the theoretical value, the draft force was measured by the strain gauge system on the general slope land and compared with theoretical values. The results of the analytical and experimental performance of power tiller on the field may be summarized as follows; (1) The mathematical equation of rolIing resistance was derived as $$Rh=\frac {W_z-AC \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\] sin\theta_1}} {tan\phi \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]+\frac{tan\theta_1}{1}$$ and angle of rolling resistance as $$\theta _1 - tan^1\[ \frac {2T(AcrS_0 - T)+\sqrt (T-AcrS_0)^2(2T)^2-4(T^2-W_2^2r^2)\times (T-AcrS_0)^2 W_z^2r^2S_0^2tan^2\phi} {2(T^2-W_z^2r^2)S_0tan\phi}\] $$and the equation of frft force was derived as$$P=(AC+Rtan\phi)\[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]cos\phi_1 ? \frac {W_z ?{AC\[ [1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]sin\phi_1 {tan\phi[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\]+ \frac {tan\phi_1} { 1} ? W_1sin\alpha $$The slip coefficient K in these equations was fitted to approximately 1. 5 on the level lands and 2 on the slope land. (2) The coefficient of rolling resistance Rn was increased with increasing slip percent 5 and did not influenced by the angle of slope land. The angle of rolling resistance Ol was increasing sinkage Z of driving wheel. The value of Ol was found to be within the limits of Ol =2? "'16?. (3) The vertical weight transfered to power tiller on general slope land can be estim ated by use of th~ derived equation: $$R_pz= \frac {\sum_{i=1}^{4}{W_i}} {l_T} { (l_T-l) cos\alpha cos\beta ? \bar(h) sin \alpha - W_1 cos\alpha cos\beta$$The vertical transfer weight $R_pz$ was decreased with increasing the angle of slope land. The ratio of weight difference of right and left driving wheel on slop eland,$\lambda= \frac { {W_L_Z} - {W_R_Z}} {W_Z} $, was increased from ,$\lambda$=0 to$\lambda$=0.4 with increasing the angle of side slope land ($\beta = 0^\circ~20^\circ) (4) In case of no draft resistance, the difference between the travelling velocities on the level and the slope land was very small to give 0.5m/sec, in which the travelling velocity on the general slope land was decreased in curvilinear trend as the draft load increased. The decreasing rate of travelling velocity by the increase of side slope angle was less than that by the increase of hill slope angle a, (5) Rate of side slip by the side slope angle was defined as $ S_r=\frac {S_s}{l_s} \times$ 100( %), and the rate of side slip of the low travelling velocity was larger than that of the high travelling velocity. (6) Draft forces of power tiller did not affect by the angular velocity of driving wheel, and maximum draft coefficient occurred at slip percent of S=60% and the maximum draft power efficiency occurred at slip percent of S=30%. The maximum draft coefficient occurred at slip percent of S=60% on the side slope land, and the draft coefficent was nearly constant regardless of the side slope angle on the hill slope land. The maximum draft coefficient occurred at slip perecent of S=65% and it was decreased with increasing hill slope angle $\alpha$. The maximum draft power efficiency occurred at S=30 % on the general slope land. Therefore, it would be reasonable to have the draft operation at slip percent of S=30% on the general slope land. (7) The portions of the power supplied by the engine of the power tiller which were used as the source of draft power were 46.7% on the concrete road, 26.7% on the level land, and 13~20%; on the general slope land ($\alpha = O~ 15^\circ ,\beta = 0 ~ 10^\circ$) , respectively. Therefore, it may be desirable to develope the new mechanism of the external pO'wer transmitting system for the general slope land to improved its performance.

• Journal of Life Science
• /
• v.21 no.7
• /
• pp.1032-1038
• /
• 2011

Recently identified Ciona intestinalis voltage sensor-containing phosphatase (Ci-VSP) consists of an ion channel-like transmembrane domain (VSD) and a phosphatase-like domain. Ci-VSP senses the change of membrane potential by its VSD and works as a phosphoinositide phosphatase by its phosphatase domain. In this study, we present the construction of His-tagged phosphatase-like domain of Ci-VSP, its recombinant expression and purification, and its enzymatic activity behavior in order to examine the biochemical behavior of phosphatase domain of Ci-VSP without interference. We found that Ci-VSP(248-576)-His can be eluted with an elution buffer containing 25 mM NaCl and 100 mM imidazole during His-tag purification. In addition, we found the proper measurement condition for kinetics study of Ci-VSP(248-576)-His against p-nitrophenyl phosphate (pNPP). We measured the kinetic constant of Ci-VSP(248-576)-His at $37^{\circ}C$, pH 5.0 or 5.5, under 30 min of reaction time, and less than $2.0\;{\mu}g$ of protein amount. With these conditions, we acquired that Ci-VSP(248-576)-His has $K_m$ of $354{\pm}0.143\;{\mu}M$, $V_{max}$ of $0.0607{\pm}0.0137\;{\mu}mol$/min/mg and $k_{cat}$ of $0.359{\pm}0.009751\;min^{-1}$ for pNPP dephosphorylation. Therefore, we produced a pure form of Ci-VSP(248-576)-His, and this showed a higher activity against pNPP. This purified protein will provide the road to a structural investigation on an interesting protein, Ci-VSP.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.4
• /
• pp.254-259
• /
• 2012

Peeling damage of trees is usually caused by Cervidae such as deer, roe deer because of the lack of food in forests. However, it happens as part of the developing of antlers in Jeju Island when the roe deer try to remove the Velvet-the skin of the antlers. The research area is the Hannam experimental forest (400 m up to 500 m above sea level) of Korea Forest Research Institute in Jeju Island, and the survey was carried out along the 6 km long of forest road with 5 m width on both sides. Twenty five tree species (total 267 stands) are damaged by peeling; 18 (134 stands) deciduous broad-leaved species, 5 (71 stands) in evergreen broad-leaved species, 2 (62 stands) coniferous species. The most common damaged species are in order of Daphniphyllum macropodum, Cryptomeria japonica, Lindera erythrocarpa, Clerodendrum trichotomum, Zanthoxylum schinifolium. Mainly damaged trees are approximately 3~4 years old saplings, and they show the mean height $120.7{\pm}42.4cm$, diameter measured at 5 cm height $1.5{\pm}0.5cm$. The Lowest peeling beginning height is $22.1{\pm}10.1cm$, and the mean length of peeling is $27.5{\pm}10.6cm$. Once the peeling damage happens, the saplings are infected by fungi secondly, and are distorted or dead, therefore the future structure of warm-temperate forests could be in influenced in species. Warm-temperate forest landscape and species change related to the climate change is a rising issue in Jeju Island. However the changes caused by peeling damage also could be an important issue in the natural process of forest environment, afforestation, local nursery and sustainable forest management of Jeju Island.

• Journal of Distribution Science
• /
• v.10 no.5
• /
• pp.37-44
• /
• 2012

In this paper, we investigate several factors that affect the locational decision of discount stores by using previous studies on the marketing area and the location of commercial facilities. We selected 21 primary variables that are expected to influence the decision of store location and, by factor analysis, grouped them into five underlying factors. Among these, the demographic factor, which shows the potential purchasing power level, had the greatest impact on the locational decision for the store. However, we found individual stores positioned according to unique locational characteristics in addition to the demographic factor. It means that we have to additionally consider if the vicinity of the market is based on any physical properties. Many previous studies proposed four decision factors for store location: the economic factor, the demographic factor, the land utilization factor, and traffic factor. However, the fivefold factors-our distinctive contribution-are more concrete and persuasive according to Korean reality. We show that location preference is based on the following criteria: (1) the area is densely populated, (2) houses stand close together, (3) residents have a high income level, (4) road traffic is developed and easy to access, and (5) public transportation is well developed. The demographic factor has the greatest impact on the location of a discount store. The number of households has a greater relevance to the demographic factor than does the individual consumer. Second, discount stores relatively prefer places where houses are located close together because such places offer easy access to the market. Third, a place whose residents have a high income level will be preferred, with its large cars and excellent traffic conditions. Fourth, a location would be highly rated if the roads around commercial facilities are well developed and their accessibility is good. Finally, discount stores must be located close to bus stops because female consumers, including housewives-the most important customers-evaluate stores based on distance. In this research, the variable of consumer attitude and preference was excluded, and the location factors of discount stores were analyzed according to a microscopic view through physical spatial data. In the future, the opening of new discount stores based on the five factors indicated above will require a comparatively shorter time from the first project feasibility analysis. In addition, the result of our study can be applied to the field of public policy for constructing and attracting large-scale distribution facilities.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.2
• /
• pp.101-109
• /
• 2012

Traditional village forests in Jeju Island represent unique cultural landscape with a history of more than several hundred years as a national cultural asset in Korea. In this paper, the characteristics and meaning of traditional village forests in Jeju Island was compared with the Dangsan and Bibo forests at inland. There are 368 Oreums, parasitic volcano, and 391 shrines of Dang(Divine place) in Jeju. Life, culture and tradition of rural villages are all connected with the Dang and Oreum in Jeju. It has been found from this study that the village in Jeju were established as a cultural landscape on the surface of natural landscape. The features of traditional villages focused on the Dang and Oreum in Jeju Island were similar to the Dangsan and Bibo forestsat inland villages. The Oreum represents mountain and the Pojedan forest is newly found in Sangmyung-ri. The seashore areas are covered by vaocanic rocks in Jeju and large scale windbreaks are hardly found. The stone tower at Sinheung-ri built for blocking sand movement represents Bibo forest. The special attribute of the Dang in Jeju is that it is close to real life and believers are still remain. In 2009, the Jeju Chilmeoridang Yeongdeunggut ritual was nominated as an Intangible Cultural Heritage of Humanity by UNESCO. The shrine of Dang, however, has been degraded fast by construction of seashore road and Jeju Olle trail path. As for the world cultural heritage discussed at international conferences, it is important that there is sustainability on the right to enjoy cultural heritage. Integrated efforts from local residents, local governments and national government are needed to set up a management scheme for the Dang culture. Rural villages in Jeju with the Dang and Oreum are expected to get an international attention as to have traditional cultural landscapes of Korea.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.2
• /
• pp.1-14
• /
• 2017

The purpose of this study is to understand the environmental traits and significance of the pond place that appears in historic maps in 'Dongchon(東村)', which is the eastern section within the fortress wall of Hanyang. We reviewed various documents and maps to identify the name of the pond, and of those materials we followed the name provided by official national records and geographical titles to designate it 'Eouidongji Pond(於義洞池).' The results of the research showed, first, that from the standpoint of location and environmental characteristics, that the area of the Eouidongji Pond was an area that contained a pastoral atmosphere within the city. It was located in an area where the waters flowing from the mountains gathered, and the boundaries of the pond would change based on water levels within a plot of land about 2,000pyeong(app. $6,600m^2$) in size. Second, when seen from the perspective of its creation background, the Eouidongji Pond seems to have been a naturally occurring pond which was modified when the water system was managed in the city at the beginning of the dynasty. In addition to its role as a reservoir, it was operated as a lotus pond(蓮池) to offer lotus(蓮) related by-products. With the nearby detached palace being actively used, it seems the pond was managed at the same time. The pond had already been filled in by the early 20th century, and although there were efforts to reconstruct the pond, it was eventually destroyed as the area was included in the site of a school during the colonial period. Third, the Eouidongji Pond was appreciated in many cases by individuals or admired as part of the natural landscape by viewing it from afar. In addition, it provided entry landscape near the road entering Dongchon, and was a location that was easily visited in connection with other nearby pleasure grounds. Through studying the location and environmental characteristics, the background of its creation and destruction, operation and management by time period, usage at the time, and characteristics of scenery appreciation of Eouidongji Pond, the Eouidongji Pond was a pond of high practical value to the nation, as it supplemented the water system in the city and was able to provide lotus harvests for the nation. In addition, from a urban environment perspective, it was a lateral landmark with a large area, as well as an effective boundary. It was an open area that the people of the Hanseong-bu could freely use, and it had a high public value due to its ease of accessibility.