• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.124-135
• /
• 2007

The purpose of this study is to analyze the hydraulic behavior in a stream reach using SMS RMA-2 model with a series of dynamic boundary conditions of main stream and lateral flows simulated by WMS HEC-1 program. For the stream reach (10.5 km) between Gongdo and Pyeongtaek water level gauge stations of Anseongcheon, the model simulated two dimensional flow characteristics by applying dynamic flow conditions of rainfall frequencies of 50, 100, 500, and 1,000 years for the main stream and three tributaries. The temporal flow behavior successfully simulated and the results showed that the distribution of mean velocity and water level within the stream reach increased according to the increase of flow frequency. Especially, the flow velocity sensibly increased at the near downstream of lateral inflow as the width of main stream is narrower.

• Journal of Environmental Science International
• /
• v.17 no.7
• /
• pp.783-793
• /
• 2008

The purpose of this study is to analyze the sensitivity of the RMA2 model parameters reflecting the flow characteristics of stream junction and thus understand the hydraulic characteristics of the channel confluence flow. This study dealt with the input parameters of the RMA-2 model, a two-dimensional numerical analysis model widely used for researches both at home and abroad. The parameters of the RMA-2 model are roughness coefficient, turbulent diffusion coefficient, Coriolis forces latitude, Density, and mesh size. This study those parameters estimated from actual heavy rainfall, and varied the parameter size by (-)30%${\sim}$+30% to review the characteristics of the flow characteristics of the channel section. Weobserved that when the ratio of the channel width was relatively small, the smaller the approaching angle was, the farther from the junctions became the generating place of the maximum flow velocity, however, when the ratio of the channel width was relatively large, the larger the approaching angle was, the farther the generating place of the maximum flow velocity from the junctions became. In particular, the distance between junctions and the place where the maximum flow velocity generated showed an absolute correlationover 90% of the relative channel width, but an inverse relationwas found when the distance to the place where the flow velocity generated was shortened as relative the channel width between the main channel and tributary increased.

• Genomics & Informatics
• /
• v.6 no.4
• /
• pp.231-234
• /
• 2008

Precise and reliable identification of CNV is still important to fully understand the effect of CNV on genetic diversity and background of complex diseases. SNP marker has been used frequently to detect CNVs, but the analysis of SNP chip data for identifying CNV has not been well established. We compared various normalization methods for CNV analysis and suggest optimal normalization procedure for reliable CNV call. Four normal Koreans and NA10851 HapMap male samples were genotyped using Affymetrix Genome-Wide Human SNP array 5.0. We evaluated the effect of median and quantile normalization to find the optimal normalization for CNV detection based on SNP array data. We also explored the effect of Robust Multichip Average (RMA) background correction for each normalization process. In total, the following 4 combinations of normalization were tried: 1) Median normalization without RMA background correction, 2) Quantile normalization without RMA background correction, 3) Median normalization with RMA background correction, and 4) Quantile normalization with RMA background correction. CNV was called using SW-ARRAY algorithm. We applied 4 different combinations of normalization and compared the effect using intensity ratio profile, box plot, and MA plot. When we applied median and quantile normalizations without RMA background correction, both methods showed similar normalization effect and the final CNV calls were also similar in terms of number and size. In both median and quantile normalizations, RMA backgroundcorrection resulted in widening the range of intensity ratio distribution, which may suggest that RMA background correction may help to detect more CNVs compared to no correction.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.187-190
• /
• 2008

The water quality at the Dongbin Harbor at Pohang city, is getting worse due to the sewage and the wastewater from communities. In this syudy, RMA2 and RMA4, which is two-dimensional depth-averaged finite element numerical model, were employed to simulate the improvement of water quality from inflowing water through an inland canal to be planned connecting Dongbin Harbor and the Hyeongsan River. For the comparative result of the numerical model, both the present condition and the restoration condition (after construction of an inland canal) is simulated. The results of these conditions reasonably simulate a real situation at the Dongbin Harbor. After construction of an inland canal, the water quality at the Dongbin Harbor will be compared to the fresh water quality of the Hyeongsan River at the steady state. Futhermore, The result of simulation will be used to decide the most effective dimension of the canal.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.795-798
• /
• 2008

An estuary is very important that the seawater and the freshwater meet and they formed wide foreshore and estuarine which is used as the habitat of various living thing and spawning bed of fish. Masan bay is typical closing bay in Korea. It is located 9 km from the open sea and most inside of Jinhae bay. The width of bay entrance is less than 1 km, where the flow velocity is very low. The large scale industrial complex of Masan bay is located in near Masan and Changwon city whose population is about 100 million. Because of low tidal velocity, the pollutants from the land are accumulated, which makes the water quality worse in Masan bay. The purpose of this study is to analyze the various hydraulic characteristics using RMA-2 model. The advection and diffusion of pollutant is also simulated using RMA-4 model according to the inflow of Changwon-stream and Nam-stream. The hydraulic simulations include the effect of tide which can be characterized by the tide data of Masan bay tide observatory.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.1
• /
• pp.94-104
• /
• 2004

The purpose of this study is to analyze various hydraulic characteristics using SMS (Surface Water Modeling System) RMA2 model. It is based on 2-D finite element method. River reaches (13.8km) from Gyeongan gauge station to the inlet of Paldang lake was selected. Finite element was made by RIMGIS Data, and the analysis of river-changes was operated by unsteady flow. The sediment concentration and bed change was simulated using SED2D model. This River's velocity was distributed that 0.05~3.85m/s and bed change was changed about 0.0003~0.0135m.

• Journal of Korea Water Resources Association
• /
• v.31 no.1
• /
• pp.85-93
• /
• 1998

This study is to analyze and predict the contaminant transport based on the hydrauli characteristics using 2-dimensional finite element model. The dynamic wate quality model. RMA-4. is used to predict the contaminant transport using the hydrulic characteristics obtained from RMA-2v model. The study region is from downstream of Cham-sil weir to upstream of Shin-Kok weir. From the results of contaminant transport analysis. it is shown that the variations of discharge and velocity give quite large effect to the transport and dispersion of contaminant material. and that the water qualities of Joong-Rang and Tan streams play an important role to the downstream also. when the incidental contaminant accident occurs and contaminant material moves to the downstream. it is resulted the decreasing of the maximum COD and the increasing of the duration time to be affected by contaminant. Finally. 2-dimensional analysis is required in the case of large river like Han River. since the large difference of contaminant concentration has been investigated in the left and right bank.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5716-5720
• /
• 2015

This study has analyzed the backwater effect by the bridge pier on the basis of the result on hydraulic characteristics with pier shapes in study(I), using a two-dimensional model(RMA-2) and an one-dimensional model(HEC-RAS). The pier shapes are classified into total six types such as square, rhombus, octagon, oval, round, and no-piers. The result of the backwater effect analysis showed that the backwater length is about 150 and 50m from HEC-RAS and RMA-2, respectively for all pier types. Although it is difficult to directly compare between results from the two models, the oval shape pier has shown similar results to the no-pier situation before the bridge construction in hydraulic characteristics. This analysis can help to select pier types in the new bridge construction for the future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.160-164
• /
• 2011

경기도 안산시 시화습지내에 위치한 하안 유도 시험장에 직선수로와 곡선수로를 시공하였다. 각각의 수로에 유도틀을 설치한 후 수리학적 특성을 분석하기 위해서 2차원 모형인 SMS를 이용하여 유량조건에 따른 유속 및 침식, 퇴적에 미치는 영향을 분석하고 예측하였다. SMS 모형 중 2차원 수리분석을 위한 RMA2 모형과 유사이송현황을 모의할 수 있는 SED2D 모형을 이용하여 하안유도 시험장에 적용하였으며 하안 유도 시험장은 크게 직선수로와 곡선수로로 구분하였다. 각각의 수로에 설치되는 유도틀은 ㄷ자형, ㄷㅂ자형, 직사각형, 마름모형이 있고, 총 10가지 경우로 하여 시험장 유도틀 형태별 2차원 수치모의를 분석하였다. 유속을 모의하기 위해 RMA2모형을 사용하였으며, 침식 및 퇴적을 모의하기 위해 SED2D모형을 사용하였다. 이러한 모의결과를 통해 실제 하천에서 유도틀 시공시 유량에 대한 하류 구간 대책을 수립하는 기초자료 활용하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.785-790
• /
• 2009

섬진강 하구역에서 모래채취로 인한 지형변화와, 댐 및 취수장의 증가로 인한 유량감소로 인해 해수의 역류범위가 증가하여 참게나 재첩과 같은 경제성 어종이 감소하고, 염분으로 인한 농업용수사용 불가와 같은 염수피해가 늘어가고 있다. 따라서 본 연구에서는 2차원 수치모형인 RMA-2, 4와 3차원 수치모형인 EFDC를 각각 이용하여 밀물 시 염수가 전파되는 범위 및 염수농도를 모의하고, 동시에 2차원 모형과 3차원 모형을 비교하여 모의목적에 대한 각 모형의 장 단점을 알아보았다. 모의결과를 살펴보면 최저 수위 시 두 모형이 큰 차이를 보이는 것을 볼 수 있었으며, EFDC가 상류쪽으로 더 길게 염수침입이 일어나는 것을 볼 수 있었다.