• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.163-169
• /
• 2013

Recently, the importance of embedded system is growing rapidly. In-order to satisfy the real-time constraints of the system, high performance embedded processor is required. Therefore, as in general purpose computer systems, embedded processor should be designed as multicore architecture as well. Using MiBench benchmarks as input, the trace-driven simulation has been performed and analyzed for the 2-core to 16-core embedded processor architectures with different types of cores from simple RISC to in-order and out-of-order superscalar processors, extensively. As a result, the achievable performance is as high as 23 times over the single core embedded RISC processor.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.8
• /
• pp.1201-1210
• /
• 1990

This paper proposes on-chip instruction and data cache memories on RISC reduced instruction set computer) architecture which supports fast instruction fetch and data read/write, and enables RISC processor under research to obtain high performance. In the execution of HLL(high level language) programs, heavily used local scalar variables are stored in large register file, but arrays, structures, and global scalar variables are difficult for compiler to allocate registers. These problems can be solved by on-chip Instruction/Data cache. And each cycle of instruction fetch, pad delay causes the lowering of the processors's performance. Cache memories are designed in CMOS technology and SRAM(static-RAM), that saves layout area and power dissipation, is used for instruction and data storage. To speed up and support RISC processor's piplined architecture efficiently, hardwired logic technology is used overall circuits i cache blocks. The schematic capture and timing simulation of proposed cache memorises are performed on Apollo DN4000 workstation using Mentor Graphics CAD tools.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.289-292
• /
• 2008

This paper presents a branch prediction algorithm and a 4-way set-associative cache for performance improvement of OpenRISC processor and a clock gating algorithm using ODC (Observability Don't Care) operation for a low-power processor. The branch prediction algorithm has a structure using BTB(Branch Target Buffer) and 4-way set associative cache has lower miss rate than direct-mapped cache. The clock gating algorithm reduces dynamic power consumption. As a result of estimation of performance and dynamic power, the performance of the OpenRISC processor using the proposed algorithm is improved about 8.9% and dynamic power of the processor using samsung $0.18{\mu}m$ technology library is reduced by 13.9%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.123-128
• /
• 2012

In order to overcome the hardware complexity and performance limit problems, recently the multi-core architecture has been prevalent. For hardware simplicity, usually RISC processor is adopted as the unit core processor. However, if the performance of unit core processor is enhanced, the overall performance of the multi-core processor architecture can be further enhanced. In this paper, in-order superscalar processor is utilized as the core for the multi-core processor architecture. Using SPEC 2000 benchmarks as input, the trace-driven simulation has been performed for the number of superscalar cores between 2 and 16 and the window size of 4 to 16 extensively. As a result, the 16-core superscalar processor for the window size of 16 results in 8.4 times speed up over the single core superscalar processor. When compared with the same number of cores, the multi-core superscalar processor performance doubles that of the multi-core RISC processor.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1395-1398
• /
• 2003

This paper presents a 32-bit RISC Micro-Controller which is useful in the dedicated DSP and communication areas. The designed processor has 5 stages pipeline architecture, and 28 instructions. This RISC Micro-Controller consist of 22,100 gates and has 5.95 ns data arrival time, and 437 ㎽ total dynamic power. The RISC Micro-Controller is a IP (Intellectual property) Core module which can implement a number of protocols by and is applicable to DSP and data communication.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.676-678
• /
• 2003

최근에 2.5G나 3G 이동 단말 장치를 위한 프로세서로, 다양한 멀티미디어가 가미된 응용구현이 가능하도록 RISC 프로세서와 DSP를 포함하는 단일 칩 프로세서 기술이 등장하고 있다. 이에 따라 듀얼 프로세서 구조에서 비디오 인코딩/디코딩의 처리 속도를 향상시키기 위안 비디오의 인코더/디코더 구조를 제안한다. 기존의 연구에서는 비디오의 인코딩/디코딩의 전 과정을 DSP가 담당하도록 설계하였으나 많은 비트 연산이 필요한 부분에서는 RISC 칩보다 효율성이 낮게 된다. 이러한 문제점을 해결하기 위하여 본 논문에서는 비디오 신호 처리의 인코딩/디코딩을 구성하는 모듈들을 DSP와 RISC의 특성에 맞도록 분리해 수행시킴으로써 효율성을 높이고자 한다.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.226-229
• /
• 2000

In this paper, we describe implementation of 32-Bit RISC Core for portable communication/information equipment, such as cellular telephones and personal digital assistants, notebook, etc. The RISC core implements the ARM$\^$R/V4 instruction set on the basis of low power techniques in architecture level and logic level. It operates with 5-stage pipeline, and has harvard architecture to increase execution speed. The processor is modeled and simulated in RTL level using VHDL. Behavioral Cache and MMU are added to the VHDL model for instruction level verification of the processor. The core is implemented using Mentor P'||'&'||'R tools with IDEC C-631 Cell library of 0.6$\mu\textrm{m}$ CMOS 1-poly 3-metal CMOS technology.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.10
• /
• pp.141-151
• /
• 1994

this paper describes the design and implementation of a RISC processor for embedded control systems. This RISC processor integrates a register file, a pipelined execution unit, a FPU interface, a memory interface, and an instruction prefetcher. Its characteristics include both single cycle executions of most instructions in a 2 phase 20 MHz frequency and the worst case interrupt latency of 7 cycles with the vectored interrupt handling that makes it possible to be applicable to the real time processing system. For efficient handling of multi-cycle instructions, data stationary hardwired control scheme equippedwith cycle counter was used. This chip integrates about 139K transistors and occupies 9.1mm$\times$9.1mm in a 1.0um DLM CMOS technology. The power dissipation is 0.8 Watts from a 5V supply at 20 MHz operation.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.257-260
• /
• 1999

We have designed a 32-bit RISC microprocessor with 16/32-bit fixed-point DSP functionality. This processor, called YRD-5, combines both general-purpose microprocessor and digital signal processor (DSP) functionality using the reduced instruction set computer (RISC) design principles. It has functional units for arithmetic operation, digital signal processing (DSP) and memory access. They operate in parallel in order to remove stall cycles after DSP and load/store instructions with one or more issue latency cycles. High performance was achieved with these parallel functional units while adopting a sophisticated 5-stage pipeline structure and an improved DSP unit.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.7
• /
• pp.1015-1024
• /
• 1990

This paper proposes a program counter unit(PCU) on the pipelined architecture of RISC (Reduced Instruction Set Computer) type high performance processors, PCU is used for supplying instruction addresses to memory units(Instruction Cache) efficiently. A RISC processor's PCU has to compute the instruction address within required intervals continnously. So, using the method of self-generated incrementor, is more efficient than the conventional one's using ALU or private adder. The proposed PCU is designed to have the fast +4(Byte Address) operation incrementor that has no carry propagation delay. Design specifications are taken by analyzing the whole data path operation of target processor's default and exceptional mode instructions. CMOS and wired logic circuit technologic are used in PCU for the fast operation which has small layout area and power dissipation. The schematic capture and logic, timing simulation of proposed PCU are performed on Apollo W/S using Mentor Graphics CAD tooks.