• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2017

The recognition rate of RFID system is made a big difference by the selection of tag type and performance of reader, packing materials and the attachment location of tag and the recognition of angle according to the above factors. Water content is the most effective factor among the various elements that affected to the recognition of RFID as the center. Therefore, the purpose of this study was to measure the RFID recognition rate per water content, the distance recognition rate of RFID tag, the RFID tag and the recognition rate by contact area. In analysis of recognition rate according to water content, 100% of recognition was possible when food product contained 0~25% moisture. However, when water content was over than 30%, recognition rate was declined less than 95%. The recognition rate between RFID tag according to water content was higher when distance was over than 0.3 cm. In the recognition rate about the contact area of RFID tag according to water content, the recognition rate was declined when the contact area becomes wider.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.501-509
• /
• 2010

In this paper, the interference avoidance performance of the RFID reader with the compressive receiver was analyzed. In the environment of the multiple dense readers operating, the recognition rates of the conventional RFID reader and the proposed RFID reader with the compressive receiver were measured and compared. The recognition rate of the proposed reader was improved more than 2.7 times compared to the conventional reader. Especially, in the environment of two proposed RFID readers operating simultaneously, little degradation of the recognition rate was observed.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.9
• /
• pp.884-891
• /
• 2008

As the scale of RFID systems grows, decrease in recognition rate of collision between readers is becoming an issue. Time division technique may solve the problem, but this will cause total recognition time to increase. This issue must be solved for real-time inventory control. In this study, total recognition time was improved by placing ARCM in RFID systems. ARCM maintains short recognition time through efficient utilization of frequency channel and manages RFID systems to recognize the tag by avoiding interference. As the result of using ARCM, saving maximum 20% of time was possible.

• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.454-461
• /
• 2009

The purpose of this study is to analyze the RFID recognition performance by level of water. A 13.56 MHz RFID management system for packaged liquid food logistics is consisted of antenna, reader, passive type tags, and embedded controller. The tests were conducted at different level of water, distances between tag and antenna, and position of attached tags. To analyze the RFID recognition performance, maximum recognition distances for a container and recognition rates for a logistics made of 27 containers were measured and analyzed. The maximum recognition distance for a container was different depending on position of attached tags, and attached tag at upside position showed a good performance. But, the recognition rate of 27 containers showed a good ability for attached tags at front side position, 30~35 cm distance to antenna, and water level 1. Therefore, to manage packaged liquid food logistics using RFID system, position of attached tag, distances between tag and antenna, and level of water should be considered.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.7
• /
• pp.209-214
• /
• 2012

RFID(Radio Frequency IDentification) is an emerging technology which brings enormous productivity benefits in applications where objects have to be identified automatically. But despite of RFID's advantage, it is not easy to realize the RFID technology in business world. The failure to read RFID tags is the most urgent problem that should be solved for RFID application. Specially, in metal and liquid material, recognition rate of RFID tag is lower than others. Though some special tags for metal and liquid have been invented, it has not prevalent in business world on account of high price. In this paper, styrofoam pad is suggested to improve recognition rate of RFID tag for metal pipe which is used in fish cultivating industry. We makes experiment using Taguchi method and analyze the effects on styrofoam thickness, attachment location of tag, and angle of antenna.

• The Journal of the Korea Contents Association
• /
• v.15 no.8
• /
• pp.9-17
• /
• 2015

One of RFID features is that each RFID tag has a unique identifying code. Logistic System utilizes RFID tag as location tracing, understanding stock or etc. On the other hand, there is a problem of overall lower recognition rate by getting the information of non-mobility tags with no need for reading. To solve this problem, we trace and analyze variation of moving and moveless RFID tag sensitivity by the hour. In analyzed data, we verify that tag sensitivity of mobile RFID is gradually increase while non-mobility tag has same intensity value. In order to detect mobile tag, we generate a function using Matlab with analyzed data and separate moving tags from non-mobility tags by software. As a result, we can confirm that non-mobility tags are detected by software and recognition rate of RFID tag is improved by separating moveless tag.

• Tunnel and Underground Space
• /
• v.26 no.4
• /
• pp.253-265
• /
• 2016

In this study, travel time data collection of mine equipments was conducted in an underground mine using a reverse Radio Frequency IDentification (RFID) system. In the reverse RFID system, RFID readers and antennas are mounted on mine equipments, and RFID tags are attached to the underground mine gallery. Indoor experiments were performed to analyze how RFID reader transmission power levels affect tag readable area and tag recognition rates. The results showed that travel time measurement become precise when the reader transmission power was reduced, however tag recognition rates were reduced. The field experiments indicated that setting the reader transmission power to 28 dBm maintained the tag recognition rate while minimizing the tracking location error. In addition, the results revealed that the reverse RFID system can be used successfully in an underground mine to collect the travel time data of haulage trucks.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.10
• /
• pp.157-164
• /
• 2010

Recently, the Radio Frequency Identification(RFID) system has been growing with many promising features in technology and applications fields. Especially, a lot of efforts for the application of RFID system in the field of logistics management have been conducted. In addition, in logistics section of steel industry a remarkable efficiency can be attained by application of the RFID system. However, in the RFID system applied for the steel industry, lots of problems were found to be solved in recognition of the tags and antennas. This paper presents the feasibility of deploying RFID in the steel industry as a tool for reduction of the production cost. An application of the steel industry to RFID-based tracking management system was proposed. The results of this paper showed that the recognition rate of material input and output was found 100 percent and secured 99 percent of detection rate in the location. In conclusion, the proposed RFID-based tracking management system was approved superior to the existing system in terms of productivity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.611-616
• /
• 2018

RFID-based Smart cabinets can make a recognition error owing to the electromagnetic wave interference. This paper proposes and implements a smart cabinet system for inventory management using RFID, especially which can be applied to biological laboratories. We calculate the optimal value of partition distance for the higher recognition rate between RFID tags and the reader, and the optimal partition thickness for electromagnetic wave absorption to achieve the higher recognition rate, in which two kinds of the partitions have been tested, a pure steel partition with various thickness and a thin steel partition attached with electromagnetic waves absorber. The experimental results show that the most recommended partition structure for the smart cabinets is one with the partition distance of 30cm and the partition thickness of 1mm attached with the electromagnetic wave absorption tapes.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.459-468
• /
• 2019

Purpose: The cavity exploration of the lower part of the road is carried out to prevent ground-sinking. However, the detected communities cannot be identified by the cavity location and history information, such as repackaging the pavement. Therefore, the field applicability of RFID systems was evaluated in this study to enable anyone to accurately identify information. Method: During temporary recovery, tag recognition distance and recognition rate were measured according to underground burial materials and telecommunication tubes using RFID systems with electronic tag chips attached to the bottom of the rubber cap. Result: The perceived distance and perceived rate of depth for each position of the electron tag did not significantly affect the depth up to 15cm, but it did have some effect if the depth was 20cm. In addition, water effects from nearby underground facilities and rainfall are relatively small, and the effects of wind will need to be considered during the weather conditions of the road. Conclusion: The RFID tags for field application of the pavement management system store various information such as location and size of cavity, identification date, cause of occurrence, and surrounding underground facilities to maximize cavity management effect with a system that can be computerized and mobile utilization.