• 조명전기설비학회논문지
• /
• 제20권6호
• /
• pp.43-48
• /
• 2006

본 논문에서는 마이크로파를 이용한 무선전력전송시스템을 구현하기 위해 2.45[GHz] 마이크로파를 수신하여 직류전력으로 변환하는 렉테나를 설계, 구현하고, RF-DC변환효율을 높이기 위한 임피던스 매칭 및 튜닝 방법을 제시하였다. 구현된 렉테나는 넓은 Open Stub를 사용하여, 쉽게 튜닝이 가능하며, 정류회로의 RF-DC변환효율은 5[dBm]입사전력에 대하여, 최대 59[%]를 얻을 수 있었다. 제작된 패치안테나와 정류회로를 이용하여 소전력무선전송시스템을 구현한 결과, 송수신거리가 1[m]떨어진 거리에서 2.2[V], 1.5[mW]의 직류전력송신이 이루어졌으므로, 소전력 디지털시스템의 운용에 적용가능한 값을 얻을 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1370-1378
• /
• 2008

In the system necessary for safety such as the train control system, to make train control information be sent correctly is very important. In the case of the system such as RF-CBTC(Radio Frequency-Communication Based Train Control), sometimes failure in correctness of train controlling information may happen because the information is sent throughout wireless transmission between on-board system of a train and wayside transmitter, and then, it is exposed to noises. Of RF-channel interference, there are various forms. Under the environment of mobile telecommunications, adjacent-channel interference and Co-channel interference are in trouble, and under the environment of the wireless LAN, inter-symbol interference is in trouble. Also, the system of the cellular CDMA mobile telecommunication is affected on the RF-channel interference such as Doppler effect, multi-cell interference, and other users' intervention. In this paper, we analyzed the effect of the train control information related to fading, intervention and other noises made in the underground interval and explained the transmission characteristics numerically. Furthermore, we calculated the mean of the error terms by increasing users in the system of the cellular CDMA. As the method for decrease the error term of sent information, we represented the way adjusting the arrangement of antennas, and we did the model related to the system of RF-CBTC in which the location of an antenna is calculated with really measured value of the transmission characteristics and the way confirming reliability of the wireless transmission.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권3호
• /
• pp.302-311
• /
• 2014

본 연구에서는 소형화된 투명 플렉시블 무선통신소자 구현을 위해, 주기적 구조를 가지는 fishbone 형태의 전송선로를 PES (polyether sulfone) 박막상에 제작하였으며, 이에 관한 RF 특성을 고찰하였다. 그 결과에 의하면, PES 박막상에 제작된 fishbone 형태의 전송선로는 종래의 코프레너선로에 비해 단파장특성을 보여주었으며, 구체적으로 50 GHz에서 선로파장은 2.23 mm으로, 종래의 코프레너 선로의 56.6%이다. 삽입손실 측정결과에 의하면 fishbone 형태의 전송선로는 50 GHz 까지의 주파수 범위에서 1.31 dB보다 낮은 저손실특성을 보여주었다. 대역폭 추출결과에 의하면, PES 박막상의 fishbone 형태의 전송선로는 통과대역이 608 GHz인 광대역 특성을 보였다. PES 박막상의 fishbone 형태의 전송선로의 특성임피던스는 기존의 주기적 구조와는 달리 매우 적은 주파수 의존성을 나타내었으며, 이로 인해 광대역의 전송선로 및 광대역 분포형 수동소자에 이용될 수 있음을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제33권2호
• /
• pp.201-208
• /
• 2001

The high power RF transmission line components are required for transmitting MW level RF power continuously in RF heating and current drive system which heat the plasma and produce plasma current in fusion reactor The liquid stub and phase shifter is proposed as the superior to the conventional stub and phase shifter. Experimental results show that they are reliable and easy to operate compared to the conventional stub and phase shifter. There is no distortion of reflected power during the raising of the liquid level. RF breakdown voltage is over 40kV. Temperature increment of the liquid is expected not to be severe. These results verify that the liquid stub and phase shifter can be used reliably in the high power continuous RF facilities.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.135-136
• /
• 2007

2.45 GHz RF Transceiver composed RF module and Digital module for USN(Ubiquitous Sensor Network) has been implemented in this paper. The proposed RF system is designed based on IEEE 802.15.4-2006 PHY standard which has a frequency range from $2.4{\sim}2.4835GHz$. In this transmitter chain, the output power is controlled form 0 to 30 dBm. In this receiver chain, less than 20 dB of NF was obtained.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.68-71
• /
• 2021

In this paper, GaN-SBD devices with excellent breakdown voltage and frequency characteristics for use in high-power microwave wireless power transmission has been modeled for PSpice circuit simulation. The RF-DC conversion circuits were simulated and compared with a commercial Si-SBD device. Although the modeled GaN-SBD devices had lower RF-DC conversion efficiency compared to Si-SBD at 2.4 and 5.8 GHz, it was confirmed through PSpice circuit simulations that they can be used sufficiently according to the required application circuit in a high power situation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.993-997
• /
• 2004

A data error inspection algorithm for wireless digital data communication was developed. Original data converted By wireless digital data error inspection algorithm. Wireless digital data is high possibility to get distortion and lose by noise and barrier on wireless. If the data check damaged and lost at receiver, can't make it clear and can't judge whether this data is right or not. Therefore, by wireless transmission data need the data error inspection algorithm in order to decrease the data distortion and lose and to monitoring the transmission data as real time. This study consists of RF station for wireless transmission, Water Level Meter station for water level measurement and Error inspection algorithm for error check of transmission data. This study is also that investigation and search for error inspection algorithm in order to wireless digital data transmission in condition of the least data's damage and lose. Designed transmitter and receiver with one - chip micro process to protect to swell the volume of circuit. Had designed RF transmitter - receiver station simply by means of ATMEL one - chip micro processing the systems. Used 10mW of the best RF power and 448MHz-449MHz on frequency band which is open to public touse free within the limited power.

• 한국통신학회논문지
• /
• 제38A권12호
• /
• pp.1061-1068
• /
• 2013

본 논문에서는 ESPAR(Electronically Steerable Parasitic Array Radiator) 안테나를 이용한 $M{\times}M$ BS-MIMO(beam space multiple input multiple output) 시스템을 제안한다. 기존 MIMO 시스템은 전송 데이터 신호를 다수의 안테나에 맵핑시켜 전송하기 때문에 다수의 RF 체인이 필요한 문제점이 있다. 다수의 RF 체인은 하드웨어의 비용을 및 RF 회로의 전력 소모를 증가 시킨다. 또한, 휴대폰과 같이 공간적인 제약이 큰 모바일 장비에서 MIMO 시스템을 사용하기 어렵다. 이러한 문제를 해결하기 위해서 단일 RF 체인을 가지는 ESPAR 안테나를 사용하여 빔 공간에서 신호를 맵핑시키는 BS-MIMO 시스템이 제안되었다. 본 논문에서는 BS-MIMO 시스템 기법에 대해서 설명하고 이를 확장한 $M{\times}M$ BS-MIMO 전송 기법의 설계 및 성능을 분석한다. 컴퓨터 모의실험을 통한 성능 확인 결과 제안된 BS-MIMO 전송기법은 기존 MIMO 기법과 비교하여 거의 동일한 수신 BER 성능을 얻는다. 따라서 다수의 RF 체인을 가지는 기존 MIMO 시스템과 비교하여 BS-MIMO 시스템은 단일 RF 체인을 가지고 MIMO 전송이 가능하며, 이로 인해서 하드웨어 비용 및 RF 회로의 전력 소모를 획기적으로 줄일 것으로 예상된다.

• International Journal of Advanced Culture Technology
• /
• 제4권4호
• /
• pp.1-5
• /
• 2016

In this paper, we present the study on the proposed design of a real-time transmission of a video from the drone to broadcasting station (OBVan) by using F8L10D-N LoRa Module. Nowadays, LoRa technology is proved to be the mass of low cost, long range machine-to-machine connectivity. Particularly in the field of broadcasting and communication system, F8L10D-N LoRa RF Module spread spectrum technology with long transmission distance and strong penetrative ability that is double stronger than traditional FSK as well as PSK modulation scheme.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.195-199
• /
• 2003

BEE 802.11 Wireless LAN protocol uses fixed transmission power. It does not consider a power control mechanism based on the distance between the transmitter and the receiver in order to improve overall channel utilization. In home environment, where stations generally lie around an AP, the AP is subject to use transmission power more than it needs. And wireless LAN stations may require different minimal desired received power. If there are many adjacent BSSs in densely populated WLAN area, they might cause RF interference to one another. In this paper we focus on the improvement of aggregate utilization by mitigating RF interference among BSSs. We show that RF interference by APs can be reduced by controlling transmission power using Link Margin information. The reduced interference will then lead to the increased aggregate throughput which is efficient resource utilization.