• 제목/요약/키워드: RF components

검색결과 371건 처리시간 0.026초

고속액체(高速液體) Chromatography에 의(依)한 $Ginsenoside-Rf,\;Rg_2$$Rh_1$의 분리(分離) (High Performance Liquid Chromatographic Isolation of Ginsenoside $-Rf,\;-Rg_2\;and\;-Rh_1$)

  • 최진호;김우정;홍순근;오성기;대포언길
    • Applied Biological Chemistry
    • /
    • 제23권4호
    • /
    • pp.206-210
    • /
    • 1980
  • 인삼(人蔘)사포닌중 소미량성분인 $ginsenoside-Rf,\;-Rg_2$$-Rh_1$을 조제용(造製用), 준조제용(準造製用) 및 분석용(分析用) HPLC를 사용(使用)하여 분리(分離)하였다. 본(本) 방법(方法)은 신속하며 이들 소미량 ginsenoside의 분리(分離) 및 동정(同定)에 매우 유효(有效)하였으며 재(再)순환 방식을 사용하여 달성되었다.

  • PDF

RF-magnetron Sputtering Process를 이용한 a-축 우선 배향된 PLZT(x/0/100)박막의 제조 (Characterization and Preparation of a-axis Preferred Oriented PLZT(x/0/100) Thin Films Deposited by RF-magnetron Sputtering Process)

  • 박명식;강승국;노광수;김동범;조상희
    • 한국재료학회지
    • /
    • 제7권6호
    • /
    • pp.522-528
    • /
    • 1997
  • RF-magnetron Sputtering Process를 이용하여 Pt/Ti/Si(100)기판위에 lanthanum-modified lead titanate 박막을 제작하였다. 기판온도와 증착시간이 증가함에 따라 증착율은 감소하였다. 기판온도가 증가함에 따라 fine grain들은 large grain으로 변화하였다. Perovskite구조는 기판온도 54$0^{\circ}C$, gas pressure 30mtorr에서 나타나기 시작하였다. 본 실험에서 perovskite 박막제작에 대한 조건은 기판온도 58$0^{\circ}C$, gas pressure 30mtorr였다. Pt/Ti/Si(100) 우선 배향된 박막을 얻었다. La양이 증가함에 따라 유전율, 항전계, 잔류분극량은 증가하였다. 중심주파수가 44.7MHz, 전파속도는 2680m/sec를 가지는 SAW filter 특성을 얻었다.

  • PDF

Red-shift of the photoluminescence peak of N-doped ZnO phosphors

  • Kim, Jun-Kwan;Lim, Jung-Wook;Kim, Hyun-Tak;Yun, Sun-Jin
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.895-897
    • /
    • 2008
  • ZnO films were fabricated using rf-magnetron sputter deposition process with different $N_2$ ambient. N-content in N-doped ZnO films was less than 1%. The wavelength of the highest intensity PL peak of N-doped ZnO was shifted to higher wavelength with increasing $N_2$ flow rate in the deposition ambient. These results indicated that the optical property of ZnO was significantly affected by the defect level created by doping with a very small amount of N.

  • PDF

인삼성분의 Rat Lens Aldose Reductase 활성에 대한 억제효과 (Inhibitory Effects of Ginseng Components on Rat Lens Aldose Reductase Activities)

  • 김학성;박웅양;성연희
    • Journal of Ginseng Research
    • /
    • 제20권1호
    • /
    • pp.106-110
    • /
    • 1996
  • The present study was undertaken to elucidate the effects of ginseng components on rat lens aldose reductase activity. Ginseng total saponin (GTS) exhibited inhibitory activities on rat lens aldose reductase in a dose-dependent manner. Among ginsenosides, Rf and Rgl showed potent inhibitory activities on rat lens aldose reductase. Lipid soluble fraction also inhibited rat lens aldose reductase activities. These data suggest that ginseng components inhibit rat lens aldose reductase activity in vitro.

  • PDF

인삼의 열처리에 의한 성분상에 관한 연구 (Effect of thermal treatment on the components of ginseng roots)

  • 이용주;한대석;김제훈
    • 약학회지
    • /
    • 제13권2_3호
    • /
    • pp.71-75
    • /
    • 1969
  • Chemical changes in components of ginseng roots by heat treatment were observed. We have let the roots of fresh ginseng, of steamed ginseng and the water soluble parts obtained from preparing steamed one be subject to our research. Acids, bases, neutral substances and genins from each one of the above came up to 12 fractions. Having the fractions through column chromatography and TLC test thereafter, we determined the Rf values of each spots presented. Among so many similar values of them, 15 spots of heterogenous component in the fresh ginseng and 6 spots in the steamed one, and 10 spots in that of water soluble parts wre detected. Considering this data obtained, we can assume that partialor all of some components of fresh ginseng might be passed into water parts while preparing steamed ginseng from fresh ones and also some components of the later (fresh ginseng) might have been converted into other substances while being heated.

  • PDF

LTCC-M 기술을 이용한 내부실장 R, L, C 수동소자의 특징 및 LMR용 PAM개발 (Characteristics of Embedded R, L, C Fabricated by Using LTCC-M Technology and Development of a PAM for LMR thereby)

  • 김인태;박성대;강현규;공선식;박윤휘;문제도
    • 마이크로전자및패키징학회지
    • /
    • 제7권1호
    • /
    • pp.13-18
    • /
    • 2000
  • 금속기판 위에 결합된 저온 소성 세라믹(low temperature co-fired ceramics on metal, LTCC- M)은 소성 후에 x-, y- 방향으로의 수축을 1% 이하로 억제할 수 있어 수동 소자를 내장하는데 매우 유리하며, 금속 기판 전체를 접지로 사용함으로써 노이즈를 감소시킬 수 있다. 본 고에서는 내부 실장 수동 소자별 특성차에 대하여 소개하고, 이러한 내부 실장 소자를 이용하여 실제로 제작된 PAM(power amplifier module)을 소개하였다. 내장된 수동 소자는 테스트 패턴 상에서 10~20%의 변화값을 보였으며 실제 모듈에 적용하여도 목표치에 부합하는 소자 구성이 가능하였다. 수동 소자가 내부에 실장됨으로써 신호 처리 시간을 감소시킬 수 있고, 납점의 감소로 공정을 단순화시킬 수 있을 뿐만 아니라 신뢰성 또한 증가시킬 수 있으므로 향후 RF모듈 외에 파워 및 고기능 소자 등 다양한 분야에 응용이 가능할 것이다.

  • PDF

SOI MOSFET's의 소신호 등가 모델과 변수 추출 (Small signal model and parameter extraction of SOI MOSFET's)

  • 이병진;박성욱;엄우용
    • 전자공학회논문지 IE
    • /
    • 제44권2호
    • /
    • pp.1-7
    • /
    • 2007
  • CMOS 소자의 높은 주파수 특성의 증가로 인하여 높은 주파수 범위에서의 RF와 아날로그 회로 설계가 가능하게 되었다. RF와 아날로그 회로 설계는 실수와 허수의 쌓인 S-파라미터의 특성 분석으로 가능하다. 높은 성능을 활용한 CMOS 기술들은 신뢰도와 밀접한 관계가 있으며, 소자의 열화로 인한 S-파라미터의 변화가 소신호 모델 파라미터들에 미치는 영향을 정확하게 분석하는데 매우 중요하다. S-파라미터의 열화로 인한 다양한 물리적인 현상들 특히 트랜스컨덕턴스와 게이트 커패시턴스의 성능 저하를 자세히 분석하였다. 측정에 사용된 H-gate와 T-gate 소자의 S-파라미터를 0.5GHz에서 40GHz 주파수 범위에서 측정하였으며, 소자의 모든 내부와 외부 파라미터들은 포화영역인 하나의 전압 조건에서 추출하였다. 이 논문은 게이트 구조가 다른 소자에 스트레스를 인가하여 소신호 등가 모델을 추출하였으며, 파라미터들의 변화를 비교 분석한 것이다.

지상파 DMB RF 수신기에서 클락 잡음 제거를 위한 인쇄 회로 기판 설계 (Design of Printed Circuit Board for Clock Noise Suppression in T-DMB RF Receiver)

  • 김현;권순영;신현철
    • 한국전자파학회논문지
    • /
    • 제20권11호
    • /
    • pp.1130-1137
    • /
    • 2009
  • 본 논문은 지상파 DMB에서 기준 클락 신호에 의한 RF 수신기의 민감도 열화 현상을 분석하고, 이를 해결하기 위한 새로운 PCB 설계 기법을 제안하였다. 현재 DMB 수신기 시스템에 사용되는 기준 주파수는 16.384 MHz, 19.2 MHz, 24.576 MHz의 세 종류가 있다. 이러한 기준 주파수의 고조파 성분이 RF 채널 주파수에 근접할 경우, 해당 채널의 감도가 심각히 열화될 수 있다. 이러한 클락 고조파 결합 문제를 해결하기 위해 스트립라인 형태의 새로운 클락 배선 설계 기법을 제안하였다. 제안된 기법은 인덕턴스 성분을 사용하여 클락 신호의 접지 단자를 주 접지 단자와 분리하고, 클락 신호선과 주변 접지면의 결합 커패시턴스 성분을 최소화 하도록 설계되었다. 이를 DMB 수신기 보드에 적용하여 수신기의 감도가 최대 2 dB 개선됨을 측정을 통하여 확인하였다.

플렉시블 무선통신소자 응용을 위한 PES 박막상의 Fishbone 형태의 전송선로에 대한 RF 특성연구 (A study on RF characteristics of fishbone-type transmission line on PES substrate for application to flexible wireless communication device)

  • 윤영
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제38권3호
    • /
    • pp.302-311
    • /
    • 2014
  • 본 연구에서는 소형화된 투명 플렉시블 무선통신소자 구현을 위해, 주기적 구조를 가지는 fishbone 형태의 전송선로를 PES (polyether sulfone) 박막상에 제작하였으며, 이에 관한 RF 특성을 고찰하였다. 그 결과에 의하면, PES 박막상에 제작된 fishbone 형태의 전송선로는 종래의 코프레너선로에 비해 단파장특성을 보여주었으며, 구체적으로 50 GHz에서 선로파장은 2.23 mm으로, 종래의 코프레너 선로의 56.6%이다. 삽입손실 측정결과에 의하면 fishbone 형태의 전송선로는 50 GHz 까지의 주파수 범위에서 1.31 dB보다 낮은 저손실특성을 보여주었다. 대역폭 추출결과에 의하면, PES 박막상의 fishbone 형태의 전송선로는 통과대역이 608 GHz인 광대역 특성을 보였다. PES 박막상의 fishbone 형태의 전송선로의 특성임피던스는 기존의 주기적 구조와는 달리 매우 적은 주파수 의존성을 나타내었으며, 이로 인해 광대역의 전송선로 및 광대역 분포형 수동소자에 이용될 수 있음을 알 수 있었다.

Effects of Biofertilizer on Growth and Yield of Rice

  • Bhuiyan Mohammad Kamrul Islam;Rico Cyren M.;Mintah Lemuel O.;Kim Man-Keun;Shon Tae-Kwon;Chung Il-Kyung;Lee Sang-Chul
    • 한국작물학회지
    • /
    • 제51권4호
    • /
    • pp.282-286
    • /
    • 2006
  • The effect of biofertilizer (compound of microbial inoculants or groups of micro-organisms) on growth and yield of rice was investigated. The experiment was carried out in a randomized complete block design with 3 replications and 7 treatments namely: $RF=N-P_2O_{5-}K_2O$ (11-5.5-4.8 kg $10a^{-1}$); half of the recommended fertilizer rate, $HRF=N-P_2O_5-K_2O$ (5.5-2.75-2.4 kg $10a^{-1}$); HRF+Bio 250=HRF combined with 250 kg biofertilizer $10a^{-1}$; HRF+Bio 500=HRF combined with 500 kg biofertilizer $10a^{-1}$; Bio 250=250 kg biofertilizer $10a^{-1}$; Bio 500=500 kg biofertilizer $10a^{-1}$; and NF = No Fertilizer. Results showed that the recorded values of plant height, tiller number and chlorophyll content at 40 to 60 days after transplanting (DAT) in HRF+Bio 500 were significantly higher than those recorded in the RF treatment. Similar observations between these two treatments were only recorded from 60 DAT onwards. Yield components were also superior in HRF+Bio 500 treatment and comparable to that of RF. The highest grain yield obtained in HRF+Bio 500 treatment (785.8 kg $10a^{-1}$) was statistically similar to that of RF (739.8 kg $10a^{-1}$) but significantly higher than that of NF (506.7 kg $10a^{-1}$). Finally, head grain recovery (90.9) was low while chalkiness (0.03) was high at HRF+Bio 500 treatment as compared with RF, which were (96.1) and (0.3), respectively. Results showed that combined treatment of HRF and 500 kg biofertilizer $10a^{-1}$ has similar effects on the growth and yield of rice with that of RF.