• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1586-1588
• /
• 2003

The Pb$(Zr{_{0.7}}Ti_{0.3})O_3$[PZT(70/30)] thin films were fabricated on Pt/$TiO_2/SiO_2$/Si substrate by RF sputtering method. The effects of Ar/$O_2$ ratio on the structural and dielectric properties of PZT thin fillms were investigated. In the case of the PZT thin films deposited with condition of 50/50$(Ar/O_2) $ ratio, the grain of the PZT thin films were fine and uniform. Increasing of $O_2$ ratio, the dielectric constant was increased. In this case the dielectirc constant and dielectric loss of PZT thin fims were about 627 and 0.010, respectively.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.142.1-142
• /
• 2003

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.66-66
• /
• 2003

• Korean Journal of Materials Research
• /
• v.28 no.3
• /
• pp.159-165
• /
• 2018

In order to increase the efficiency of the sputtering method widely used in thin film fabrication, a dc sputtering apparatus which supplies both high frequency and magnetic field from the outside was fabricated, and cobalt thin film was fabricated using this apparatus. The apparatus can independently control the applied voltage, the target-substrate distance, and the target current, which are important parameters in the sputtering method, so that a stable glow discharge is obtained even at a low gas pressure of $10^{-3}$ Torr. The fabrication conditions using the sputtering method were mainly performed in $Ar+O_2$ mixed gas containing about 0.6 % oxygen gas under various Ar gas pressures of 1 to 30 mTorr. The microstructure of Co thin films deposited using this apparatus was examined by electron diffraction pattern and X-ray techniques. The magnetic properties were investigated by measuring the magnetization curves. The microstructure and magnetic properties of Co thin films depend on the discharge gas pressure. The thin film fabricated at high gas pressure showed a columnar structure containing a large amount of the third phase in the boundary region and the thin film formed at low gas pressure showed little or no columnar structure. The coercivity in the plane was slightly larger than that in the latter case.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.10
• /
• pp.759-762
• /
• 2010

In this investigation, the effects of $N_2/(Ar+N_2)$ gas partial pressure on the structural, electrical, and thermal properties of AlN dielectric layers prepared on aluminum substrates using RF-magnetron sputtering method were analyzed. Among the films, the AlN dielectric film deposited under $N_2/(Ar+N_2)$ gas partial pressure of 75% exhibit the highest AlN (002) preferred orientation, which was grain size of about 15.32 nm and very dense structure. We suggest the possibilities of it's application as a dielectric layer for metal PCB because the AlN films prepared at optimized gas partial pressure can improving the insulating property, the thermal conductivity, and thermal diffusivity of the films.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1248_1249
• /
• 2009

The $Sr_{0.7}Bi_{2.3}Nb_2O_9$(SBN) thin films are deposited on Pt-coated electrode(Pt/Ti/$SiO_2$/Si) using RF sputtering method with RF power and Ar/$O_2$ ratio. The size of grain of SBN thin films were increased with the increase of Ar/$O_2$ ratio and RF power respectively. Also, the crystallinity of SBN thin films were increased remarkably at RF power and Ar/$O_2$ ratio were 80[W] and 80/20, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.8
• /
• pp.671-676
• /
• 2009

The $Sr_{0.7}Bi_{2.3}Nb_2O_9$(SBN) thin films are deposited on Pt-coated electrode(Pt/Ti/$SiO_2$/Si) using RF sputtering method at various deposition conditions. We investigated the effect of deposition condition on the surface morphology and dielectric properties of SBN thin films. The optimum of the rougness showed about 4.33 nm in 70/30 of Ar/$O_2$ ratio. The crystallinity and rougness of SBN thin films were increased with the increase of rf power. Also, Deposition rate of SBN thin films was about 4.17 nm/min in 70 W of rf power. The capacitance of SBN thin films were increased with the increase of Ar/$O_2$ ratio, rf power and deposition temperature respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1480-1483
• /
• 2005

Transparent thin composite films (TCFs) were deposited on OLED devices by means of RF sputtering method and their passivation-properties were evaluated by comparing to the e-beam evaporating method. This composite film formed by mixed ratio of MgO (3wt %): $SiO_2$ (1wt %) was developed from pallet as a source of e-beam evaporator to 6-inch size target for sputtering in order to apply for large-sized organic display devices. Water Vapor Transmission Rates (WVTR) of the deposited films were measured as a function of thickness to assess the effectiveness of this film as a passivation layer and it applied to real devices. From this study, we can confirm that the passivation layer formed by TCFs using RF sputtering method sufficiently shows the potentiality of application to passivation layer for organic display devices.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.282-283
• /
• 2003

TiO$_2$ 박막은 높은 굴절률과 유전 상수를 가지며, 가시광선과 근적외선 영역에서 우수한 투과성을 나타낸다. 따라서, 전기적, 광학적 특성이 우수한 광학코팅에 응용되고 있다. 또한 화학적으로 안정하고 비교적 큰 에너지 밴드 갭을 지닌 반도체 물질로서 유전체 다층 박막을 제작하는데 있어서 중요한 물질로 사용되고 있다. TiO$_2$ 박막을 제작하기 위한 물리적인 방법으로는 sputtering, anodic 또는 thermal, e-beam evaporation 등이 이용되고 있으며, sol-gel법, CVD 등과 같은 화학적인 방법도 이용되고 있다. (중략)

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.4
• /
• pp.299-305
• /
• 2010

Purposes: The purposes of this study were to investigate the optical, structural and electrical properties of the antimony doped tin oxide(ATO) thin films according to certain variable deposition conditions, such as RF input power and T-S (target-substrate) distance change, using transparent conducting oxide (TCO). Methods: ATO thin films of Sb concentration ratio with $SnO_2:Sb_2O_5$ = 95:5 wt% were deposited at room temperature by RF magnetron sputtering method. Results: ATO thin films were most sensitive to the RF input power: light transmittance was 78% at RF input power of 30W, and 0.56 nm for the surface roughness and 1007 $\Omega{\cdot}cm^{-2}$ for the sheet resistance as well. Conclusions: It was found that ATO thin films were showed the large change in its characteristics of structural, optical and electrical properties which were affected by T-S distance and RF input power.