• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.8
• /
• pp.510-517
• /
• 2014

Recently, Cable communications services are becoming the HDTV to 3DTV, UHDTV broadcasting and 100Mbps to 1Gbps Internet. however existing technologies are limited to provide high-quality broadband services in the HFC network. The network upgrade technologies have some problems that Up/Downsteam frequency extension, Cost of upgrading by using DOCSIS3.1, EPOC and Legacy STB compatibility, Cost of upgrading the network by RFoG, RF overlay PON. This paper propose the RF/PON based gigabit Transmission system in order to provide the 1Gbps internet without using frequency and the Multiscreen to IP devices. After the proposed RF/PON system was developed and implemented, this paper evaluate the performance of RF/PON system for simultaneously real-time braodcasting and 1Gbps internet, Multiscreen service, and so on.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.5
• /
• pp.854-859
• /
• 2009

Many pilot projects are developed using USN(Ubiquitous Sensor network). Recently USN has more attention to be used for the applications of circumstance monitoring. In order to acquire information from sensor nodes, sensor nodes need a RF transceiver. In this paper we describe the design of a RF transceiver, based on IEEE 802.15.4, for sensor nodes operating in 2.4GHz frequency band. The architecture to be implemented and the electrical performance specifications satisfied IEEE 802.15.4 are presented. The noise figure of a receiver, selectivity, phase noise of a frequency synthesizer, transmitter's linearity and spectrum mask are derived as a design parameters from the specifications of IEEE 802.15.4.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.731-734
• /
• 2011

This paper proposed the Low power configuration of Single hop WSN(Wireless Sensor Network) system. When the RF communication is done each tag node during the WSN systems operating, power consumption is greatest. There for, if you configure the Network with the RF communication module turn on/off periodically, power consumption less then operating the module all the time without it toggles. However, some data omissions may occur in which transmission and receipt is done. So this paper proposed the algorithm for low power system without data omissions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1905-1913
• /
• 2006

The researches about the hardware and the software implementing ubiquitous sensor network have great rush in recent years. This paper deals the development of a sensor node with the dual interface which also has an RF wireless interface while has an Bluetooth interface used widely in present. This sensor node includes a Atmeg32 microcontroller, a Bluetooth module, a RF module. a temperature-humidity sensor. and I also develop the F/Ws controlling each modules with C language using GCC compiler. The sensor node developed can reaches 15m with Bluetooth interface and 60m with RF interface. It works stably with the voltage above 5V and it consumes currents 21mA average in idle mode, 63mA average in active mode.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.2
• /
• pp.83-87
• /
• 2004

Phase noise performance and current consumption of Radio Frequency (RF) Voltage-Controlled Oscillator (VCO) are largely dependent on the Quality (Q) factor of inductor-capacitor (LC) tank. Because the Q-factor of LC tank is determined by on-chip spiral inductor, we designed, analyzed, and modeled on-chip differential inductor to enhance differential Q-factor, reduce current consumption and save silicon area. The simulated inductance is 3.3 nH and Q-factor is 15 at 2 GHz. Self-resonance frequency is as high as 13 GHz. To verify its use to RF applications, we designed 2 GHz differential LC VCO. The measurement result of phase noise is -112 dBc/Hz at an offset frequency of 100 kHz from a 2GHz carrier frequency. Tuning range is about 500 MHz (25%), and current consumption varies from 5mA to 8.4 mA using bias control technique. Implemented in $0.35-{\mu}m$ SiGe BiCMOS technology, the VCO occupies $400\;um{\times}800\;um$ of silicon area.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.360-361
• /
• 2006

This paper describes a wire and wireless network sensor for temperature and humidity measurements. The network sensor comprises PLC(Power Line Communication) and RF transmitter(433MHz) for acquiring an internal (on-board) sensor signal, and measured data is transmitted to a main processing unit. The network sensor module is consist of MEMS sensor, 10-bit A/D converter, pre-amp., gain-amp., ADUC812 one chip processor and PLC/RF transmitting unit. The temperature and humidity sensor is based on MEMS piezoelectric membrane structure and is implemented by using dual function sensor for smart home and smart building.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.3
• /
• pp.54-61
• /
• 2002

A remote image transmission apparatus combines robot technology and image transmission there is safe problem or place that a person can not go. Recently, control apparatus that use wire and RF between web server and robot for remote control are developed. But there is problem that must install internet line and communication distance. Transmission distance problem call solve when using the equipment of RF, but price of RF router is problem that is very high cost. In this paper, we developed remote control system using the CDMA cellular phone communication network that can control image transmission and image transmission apparatus to solve these problem. Developed system could solve defects of methods that use existent RF and internet. And could transmit the most suitable image and voice under limited condition include current communication network.

• Journal of Internet Computing and Services
• /
• v.3 no.1
• /
• pp.1-10
• /
• 2002

A remote image transmission apparatus combines robot technology and image transmission there is safe problem or place that a person can not go. Recently, control apparatus that use wire and RF between web server and robot for remote control are developed. But, there is problem that must install Internet line and communication distance. Transmission distance problem can solve when using the equipment of RF, but price of RF router is problem that is very high cost. In this paper, we developed remote control system using the cellular phone communication network that can control image transmission and image transmission apparatus to solve these problem. Developed system could solve defects of methods that use existent RF and internet. And could transmit the most suitable image and voice under limited condition include current communication network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.9
• /
• pp.1271-1274
• /
• 2021

RF fingerprinting based on deep learning (DL) has gained interests as a means to improve the security of near field communication (NFC) by allowing identification of NFC tags based on unique physical characteristics. To achieve high accuracy in the identification of NFC tags, it is crucial to utilize a large number of training data, however it is hard to collect such dataset in practice. In this study, we have provided new methodology to generate RF waveform from NFC tags, i.e., data augmentation, based on a conditional generative adversarial network (CGAN). By using the RF waveform of NFC tags which is collected from the testbed with software defined radio (SDR), we have confirmed that the realistic RF waveform can be generated through our proposed scheme.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.602-607
• /
• 2006

In this paper, the distributed network synthesis, which is useful to the design of wireless power amplifiers, is proposed, and a RF power amplifier is designed using the technique. The transfer function of distributed matching circuits is derived by Chebyshev approximation, and network element values for a specified topology are given as a function of minimum insertion losses and ripples. As an example, after a power transistor is modeled by load-pull data, the synthesis for distributed matching networks is applied to a power amplifier design, which has the electrical performance of 17dB gain and less IM3 than -43dBc at the 20W output power between 800 to 900MHz frequency range. Experimental results from a fabricated amplifier are shown to approach the design performance in the operating frequency range. The design of impedance matching networks by the transfer function synthesis is a useful method for the design of RF power amplifiers.