• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.357-360
• /
• 2004

Al doped ZnO thin films have been were properties of excellent optical transmittance, low resistivity and wide bandgap where be widely used transparent electrode on solar cell. In this paper, ZnO:Al thin films on PC substrate were prepared by RF magnetron sputtering method using ceramic taget with diffrent deposition conditions. In addition, the electrical, structural, optical properties were investigated. we investigated sample properties of Sputter powers and pressures change in $25{\sim}125W,\;2{\times}10^{-2}{\sim}2{\times}10^{-3}Torr$.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.1
• /
• pp.29-32
• /
• 2010

In this study, transparent and conductive Al-doped zinc oxide (AZO) films were prepared on a glass substrate by an radio frequency (RF) magnetron sputtering method using a 150-nm-thick AZO target (Al: 2 wt.%) at room temperature. We investigated the effects of RF power between 100-350 W (in steps of 50 W) on the structural, electrical, and optical properties of the AZO films. The thickness and cross-sectional images of the films were observed by field emission scanning electron microscopy. The thicknesses of all films were kept constant at 150 nm and grown on a glass substrate. The grain sizes of the AZO films were determined with the X-ray diffraction by using the Scherrer' equation, and their electrical properties were investigated using a Hall effect electronic transport measurement system. The transmittance of the AZO films was also measured by an ultraviolet-visible spectrometer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.117-117
• /
• 2000

높은 광학적 투과성과 전기전도성을 갖는 ITO film은 solar cell같은 optoelectronic device나 휴대용 소형 TV, flat panel display 등의 투명전극으로 그 응용 분야가 광범위하여 많은 연구가 수행되어져 왔다. 기판으로서 유리를 사용할 때 생기는 활용범위 제한을 극복하고자 최근 유기물 위에 증착이 가능한 저온 증착방법에 대한 연구가 활발히 이루어지고 있다. 그 가운데 이온빔과 같은 energetic한 beam을 이용한 박막의 제조는 기판을 플라즈마 발생지역으로부터 분리시켜 이온빔의 flux 및 에너지, 입사각 등의 자유로운 조절을 통해 상온에서도 우수한 성질의 박막형성 가능성이 제시되어 지고 있다. ITO박막을 형성하는 방법 중 스프레이법이나 CVD법과 같은 화학적 증착방법은 증착시 350-50$0^{\circ}C$의 고온이 필요하고 현재 가장 많이 응용되어 지고 있는 sputter법은 15$0^{\circ}C$정도의 가열이 필요하므로 앞으로 응용가능성이 매우 커서 많은 연구가 진행중인 플라스틱과 아크릴 같은 flexible 한 기판위 증착에 적용이 불가능하다. 본 실험에서는 IBAD(Ion Beam Assisted Deposition)법을 이용하여 저온 ITO film을 유리와 유기막위에 증착하는 연구를 수행하였다. 유기막위에 증착된 ITO는 보다 가볍고 충격에 강하고 유리에 못지 않은 투과성을 가지고 있으나 현재 film의 quality 향상에 대한 요구가 증대되어 지고 있는 실정이다. 따라서, 본 실험에서는 dual oxygen ion gun의 조건변화에 따른 ITO film의 특성변화를 관찰하였다. 고정된 증？율에 한 개 ion gun에 ion flux를 고정시킨 후 또 다른 ion gun에서 발생하는 oxygen radical의 영향을 조사하였으며 oxygen radical의 rf power에 따른 변화는 OES(Optical emission spectroscopy)를 사용하였다. 너무 적은 oxygen ion beam flux나 oxygen radical은 film의 전도도 및 투과도를 저하시켰고 반면 너무 과도한 flux의 증가 시는 전도도는 감소하였고 투과도는 증가하는 경향을 보였다. 기판에 도달하는 oxygen ion flux는 faraday cup을 이용하여 측정하였으며 증착된 ITO film은 XPS, UV-spectrometer, 4-point probe를 이용하여 분석하였다.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1818-1820
• /
• 1999

This paper presents direct ${\mu}c$-Si:H thin film growth on the glass substrates using RPCVD system (remote plasma chemical vapor deposition) in low temperature. Hydrogenated micro-crystalline silicon deposited by RPCVD system in low temperature is very useful material for photovoltaic devices, sensor applications, and TFTs (thin film transistors). Varying the deposition conditions such as substrate temperature, gas flow rate, reactive gas ratio $(SiH_4/H_2)$, total chamber pressure, and rf power, we deposited ${\mu}c$-Si:H thin films on the glass substrates (Corning glass 1737). And then we measured the structural and electrical properties of the films.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.5-8
• /
• 2004

In this paper, a novel 400MHz band small meander microstrip antenna is proposed the shape of the proposed antenna is a waved meander microstrip with a pair rf short pins on th￡ edge. the length of waved meander microstrip is $\lambda_g/4$ but it bends to half its size. Therefore, the total size of the proposed antenna is reduced to about 1/20 which is compared with a square patch antenna the simulated antenna gain is about 3dBi at 424MHz. the proposed antenna of -10dB impedance bandwidth is measured about $1.4\%$.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1567_1567
• /
• 2009

In this article, we deal with the IED(Intelligent Electronic Device) on the EMC aspect. Recognizing how expensive the thorough EMC work will be regarding the entire IED, we focus on the characteristics of RF signals moving along multiple TX-lines in one specified example of the typical IED structure, say, the layer of trace lines. Simplifying the real structure, we run a 3D EM program and analyze the properties of signals on the lines and interference due to the coupling between the neighboring lines.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.826-829
• /
• 2002

$MoO_3$ thin films were deposited on electrode and heater screen-printed alumina substrates in en atmosphere by RF reactive sputtering. The deposition was performed at $300^{\circ}C$ with 350W of a forward power in an $Ar-O_2$ atmosphere. The working pressure was maintained at $3{\times}10^{-2}$mtorr and all deposited films were annealed at $500^{\circ}C$ for 5hours. The surface morphology of films was observed by using a SEM and crystalline phases were analyzed by XRD. The sensing properties were investigated in term of gas concentration under exposure of reducing gases such as $H_2$, $NH_3$ and CO.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.166-168
• /
• 2006

An analog front-end circuit for 13.56MHz ISO/IECl4443 type B compatible RFID tags was designed. The designed circuit includes a rectifier and regulator to generate a stable DC voltage from the RF signal, an over-voltage limiter to protect the circuit from high voltages, an ASK demodulator to extract the data transferred from reader to tag, and a load modulator to transfer data from tag to reader. The functionality of the designed circuit has been verified through simulations using 0.25um CMOS process parameters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.644-647
• /
• 2004

Recently, the environmental problem has received considerable attention. so, many lamps have been developing for environmental requirement and energy efficiency, also, at glow discharge lamp researchers try to reduce energy spending that is power saving lamp. this kind requirement agree with strong points of electrodeless fluorescent lamp has received to now lighting sauce. In this paper, at the research and development of Electrodeless Fluorescent Lamp phase, according to ferrite C.F.D(Computational Fluid Dynamics) Simulation and lamp brightness character are measured to find optimization design requirements of RF antenna which is impotent for emission of lamp.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.218-218
• /
• 2010

본 연구에서는 투명 전극 대체 물질로써 유망한 ZnO의 전기적 특성 향상을 위하여 IV족 원소인 Si을 1, 3, 5 wt% 첨가하여 SZO 박막을 제작하여 dopant의 앙, 온도 변화에 따른 전기적, 광학적, 구조적 특성을 분석하였다. Rf-magnetron sputtering system을 이용하여 slide glass위에 증착 하였으며 $100{\sim}500^{\circ}C$ 온도 변화를 주었다. 결정성 분석을 위한 XRD 분석 결과 온도 증가에 따라 (002) peak의 세기가 증가하며, Si 첨가량과 관계없이 동일한 2 theta에서 peak가 관측되었다. 미세 구조 분석 결과 입자 크기 또한 온도 증가에 따라 증가함을 확인하였으며, 박막 두께는 대략 300nm로 확인하였다. 모든 SZO 박막은 가시광선 영역에서 80% 이상의 투과율을 보였으며 PL 분석 결과 Si 첨가량과 관계없이 동일한 스펙트럼을 가지며 380 nm, 540 nm 근처에서 peak를 확인하였다. 최소 비저항 값은 5SZO 막에서 $2.44{\times}10^{-3}\;{\Omega}cm^{-1}$을 보였다.