• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.12
• /
• pp.1649-1655
• /
• 1988

Thermally growon SiO2 films were thermally nitrided in a hot-wall furnace and in a RF-heated cold-wall reactor and their characteristics were investigated by the AES and the C-V dmeasurements. The Auger depth profile show that 200\ulcornerSiO2 film nitrided at 1200\ulcorner, for 2hrs by the hot-wall process has a nitrogen-rich layer near the SiOxNy-Si interface. However the nitrogen-ri h layer is not observed in the case of cold-wall process. The maximum flat-band voltage for the SiO2 films nitrided by the hot-wall process is higher than by the cold-wall process, and the peak value of flat-band voltage for the hot-wall process appears the longer nitridation time than that for the cold-wall process. The SiOxNy-Si interface shift toward the Si substrate for the case of the hot-wall process is larger than that for the cold-wall process.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1976-1981
• /
• 2009

Transparent conducting aluminum-doped zinc oxide (AZO) thin films were deposited on Coming glass substrate using an Gun-type rf magnetron sputtering deposition technology. The AZO thin films were fabricated with an AZO ceramic target (Zn: 98wt.%, $Al_2O_3$: 2wt.%). The AZO thin films were deposited with various growth conditions such as the substrate temperature, oxygen pressure. X -ray diffraction (XRD), UV/visible spectroscope, atomic force microscope (AFM), and Hall effect measurement system were done in order to investigate the properties of the AZO thin films Among the AZO thin films prepared in this study, the one formed at conditions of the substrate temperature $100^{\circ}C$, Ar 50 sccm, $O_2$ 5 sccm and working pressure 5 motor showed the best properties of an electrical resistivity of $1.763{\times}10^{-4}\;[{\Omega}{\cdot}cm]$, a carrier concentration of $1.801{\times}10^{21}\;[cm^{-3}]$, and a carrier mobility of $19.66\;[cm^2/V{\cdot}S]$, which indicates that it could be used as a transparent electrode for thin film transistor and flat panel display applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.394-397
• /
• 2001

In this paper, in-situ deposited Ru/RuO$_2$ bottom electrodes have been investigated as new bottom electrodes for PZT thin film capacitor application. As a comparison, structural and electrical properties of PZT thin films on Pt/Ti and RuO$_2$ bottom electrodes are also investigated. The use of Ru/RuO$_2$ hybrid electrodes showed better electrical properties in compression with RuO$_2$ bottom electrode. With increasing Ru electrode thickness, the PZT thin films showed preferred orientation along the (110) direction and leakage current of PZT thin films were improved. The PZT thin films on Ru (100nm)/RuO$_2$ electrodes exhibited excellent ferroelectric properties such as remant polarization and coercive field of 7.2 C/$\textrm{cm}^2$ and 46.35 kV/cm, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.7
• /
• pp.564-568
• /
• 2003

The etching of Au thin films have been performed in an inductively coupled CF$_4$/Cl$_2$/Ar plasma. The etch rates were measured as CF$_4$ contents added from 0 to 30 % to Cl$_2$/Ar plasma, of which gas mixing ratio was fixed at 20%. Other parameters were fixed at an rf power of 700 W, a dc bias voltage of 150 V, a chamber pressure of 15 mTorr, and a substrate temperature of 3$0^{\circ}C$. The highest etch rate of the Au thin film was 3700 $\AA$m/min at a 10% additive CF$_4$ into Cl$_2$/Ar plasma. The surface reaction of the etched Au thin films was investigated using x-ray photoelectron spectroscopy (XPS) analysis. XPS analysis indicated that Au reacted with Cl and formed Au-Cl, which is hard to remove on the surface because of its high melting point. The etching products could be sputtered by Ar ion bombardment.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.3
• /
• pp.144-148
• /
• 2012

In this work, we investigated to the etching characteristics of $TiO_2$ thin film and the selectivity using the inductively coupled plasma system. The etch rate and the selectivity were obtained with various gas mixing ratios. The maximum etch rate of $TiO_2$ thin film was 61.6 nm/min. The selectivity of $TiO_2$ to TiN, and $TiO_2$ to $SiO_2$ were obtained as 2.13 and 1.39, respectively. The etching process conditions are 400 W for RF power, -150 V for DC-bias voltage, 2 Pa for the process pressure, and $40^{\circ}C$ for substrate temperature. The chemical states of the etched surfaces were investigated with X-ray photoelectron spectroscopy (XPS). Its analysis showed that the etching mechanism was based on the physical and chemical pathways in the ion-assisted physical reaction.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.4
• /
• pp.314-318
• /
• 2002

The etching behaviors of the ferroelectric $YMnO_3$ thin films were studied by an inductively coupled plasma (ICP). The maximum etch rate of $YMnO_3$ thin film is 300 ${\AA}/min$ at Ar/$Cl_2$of 2/8, RF power of 800W, dc bias voltage of 200V, chamber pressure of 15mTorr and substrate temperature of $30^{\circ}C$. Addition of $CF_4$ gas decrease the etch rate of $YMnO_3$ thin film. From the results of XPS analysis, nonvolatile $YF_x$ compounds were found on the surface of $YMnO_3$ thin film which is etched in Ar/$Cl_2$/CF$_4$plasma. The etch profile of YMnO$_3$film is improved by addition of $CF_4$ gas into the Ar/$Cl_2$ plasma. These results suggest that YF$_{x}$ compound acts as a sidewall passivants which reduce the sticking coefficient of chlorine on $YMnO_3$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.6
• /
• pp.480-485
• /
• 2011

ZnO is an n-type semiconductor with a wide band gap near 3.37 eV. It was known that ZnO films with a resistivity of the order of $10^{-4}\;{\Omega}cm$ is not easy to obtain. 1, 3, and 5wt% Si element were added into ZnO in ordre to improve the electrical and optical characteristics. The Si-doped ZnO (SZO) was grown on a glass substrate by radio frequency (RF) magnetron sputtering at the temperature range from 100 to $500^{\circ}C$. X-ray diffraction (XRD) patterns of SZO film showed preferable crystal orientation of (002) plane. It was confirmed that the lowest resistivity of the SZO films was $2.44{\times}10^{-3}{\Omega}cm$ and SZO films were significantly influenced by the working temperature. The average transmittance of the films was over 80% in the visible ranges.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.5-5
• /
• 2009

Thin-film-transistors (TFTs) that can be prepared at low temperatures have attracted much attention because of the great potential for transparent and flexible electronics. One of the mainstreams in this field is the use of organic semiconductors such as pentacene. But device performance of the organic TFTs is still limited due to low field-effect mobility and rapid degradation after exposing to air. Alternative approach is the use of amorphous oxide semiconductors as a channel. Amorphous oxide semiconductors (AOSs) based TFTs showed the fast technological development, because AOS films can be fabricated at room temperature and exhibit the possibility in application like flexible display, electronic paper, and larges solar cells. Among the various AOSs, a-IGZO has lots of advantages because it has high channel mobility, uniform surface roughness and good transparency. [1] The high mobility is attributed to the overlap of spherical s-orbital of the heavy post-transition metal cations. This study demonstrated the effect of the variation in channel thickness from 30nm to 200nm on the TFT device performance. When the thickness was increased, turn-on voltage and subthreshold swing was decreased. The a-IGZO channels and source/drain metals were deposited with shadow mask. The a-IGZO channel layer was deposited on $SiO_2$/p-Si substrates by RF magnetron sputtering, where RF power is 150W. And working pressure is 3m Torr, at $O_2/Ar$ (2/28 sccm) atmosphere. The electrodes were formed with electron-beam evaporated Ti (30 nm) and Au (70 nm) bilayer. Finally, Al (150nm) as a gate metal was thermal-evaporated. TFT devices were heat-treated in a furnace at 250 $^{\circ}C$ and nitrogen atmosphere for 1hour. The electrical properties of the TFTs were measured using a probe-station. The TFT with channel thickness of 150nm exhibits a good subthreshold swing (SS) of 0.72 V/decade and on-off ratio of $1{\times}10^8$. The field effect mobility and threshold voltage were evaluated as 7.2 and 8 V, respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.195-195
• /
• 2016

Titanium and its alloys are widely used as implants in orthopedics, dentistry and cardiology due to their outstanding properties, such as high strength, high level of hemocompatibility and enhanced biocompatibility. Hence, recent works showed that the synthesis of new Ti-based alloys for implant application involves more biocompatible metallic alloying element, such as, Nb, Hf, Zr and Mo. In particular, Nb and Hf are one of the most effective Ti ${\beta}-stabilizer$ and reducing the elastic modulus. Plasma electrolyte oxidation (PEO) is known as excellent method in the biocompatibility of biomaterial due to quickly coating time and controlled coating condition. The anodized oxide layer and diameter modulation of Ti alloys can be obtained function of improvement of cell adhesion. Silicon (Si) and magnesium (Mg) has a beneficial effect on bone. Si in particular has been found to be essential for normal bone and cartilage growth and development. In vitro studies have shown that Mg plays very important roles in essential for normal growth and metabolism of skeletal tissue in vertebrates and can be detected as minor constituents in teeth and bone. The aim of this study is to research Si and Mg doped hydroxyapatite film formation by plasma electrolytic oxidation. Ti-29Nb-xHf (x= 0, 3, 7 and 15wt%, mass fraction) alloys were prepared Ti-29Nb-xHf alloys of containing Hf up from 0 wt% to 15 wt% were melted by using a vacuum furnace. Ti-29Nb-xHf alloys were homogenized for 2 hr at $1050^{\circ}C$. Each alloy was anodized in solution containing typically 0.15 M calcium acetate monohydrate + 0.02 M calcium glycerophosphate at room temperature. A direct current power source was used for the process of anodization. Anodized alloys was prepared using 270V~300V anodization voltage at room. A Si and Mg coating was produced by RF-magnetron sputtering system. RF power of 100W was applied to the target for 1h at room temperature. The microstructure, phase and composition of Si and Mg coated oxide surface of Ti-29Nb-xHf alloys were examined by FE-SEM, EDS, and XRD.

• Journal of the Korean Society for information Management
• /
• v.5 no.1
• /
• pp.31-52
• /
• 1988

The information policy in Japan have bccir growing rapldlr 111 recent vttars. \'arioi~s level of govc~riimerital organrzatlons, ir~bt~tution arid agrircics have undt~rtak~~rr iriforrnatiori polrcy 111 order to i r l - crease information flow toward tlie society in Japan. At tlie same trme, computerized library systems also h a w uridergoirc rapid expansion. NACSIS(National Ceriter for- Science Informat~on System) wl~icl~ was cstablisl~ed bv Mirristr> of Etlr~c~arion, Sc~ence arid Culture haw witnessed dramatic adv;rnces i r i promoting for corrstructiori of database so as to provide their 11rf'3r.mat1orr nu nationwide scale. T l r i h articlr inrroduccs tlie actr\rtle> and ~mplcmeritat~o~~ of it format in^^ pol~cy wl~i(~li taktas a place hy goverrirnrlit of Japar~ aid arraly~c,.; thi~ ~ I . O I . P S I of deciiioii maltiiig iri polit~cal procedures. So far as b:ast-A\~ari riatioris art, ~ . n r i v t ~ r ~ ~ , e.;pc,ciall\. Kr,rc.an a~rd Japair !rave ,imilar cultural and liistorical backjir. ourii1, ard could t)t. tliif most a p p r o p r i a t ~ ~ caac stlldh for political ~nq~lerncritat~orr. Thus the topic of this artrclc will be useful to r t ~ a l l ~ t . Ore, trail ur~d c r r o r prorex, iri iiiior.matior~ pnlic\ulcorner.