• 대한교통학회지
• /
• 제14권4호
• /
• pp.7-29
• /
• 1996

The optimal solution obtained by a linear programming model is to maximize the ramp inflow rate. It is argued in this paper that the maximization of inflow rate is different from the maximization of outflow rate under congested conditions. Therefore, this paper proposes a systematic searching procedure from a linear programing formulation to a integer programming : first obtain the optimal solution by a linear programming and then adding weight to linear programming then. solve the optimal solution again by integer programming i.e. The proposed method is an interactive approach. Measure of effectiveness by simulation models regards the real time data(O/D, queue, delay, etc), can be utilized in the proposed interactive process.

• Nuclear Engineering and Technology
• /
• 제20권4호
• /
• pp.241-245
• /
• 1988

핵연료봉의 PCI 파손은 원자로의 운전제한과 밀접한 관계가 있기 때문에, 출력급증 조건에서 핵연료봉의 PCI 파손을 지배하는 파손인자들의 거동을 검토하는 것은 매우 중요하다. 본 연구에서는 피복관에서의 원주방향 응력, 원주방향 변형도, 원주방향 주름 높이, 크립 변형율 및 변형도 에너지등의 파손인자들에 대한 거동특성을 핵연료봉 성능해석용 전산코드인 FEMAXI-IV를 이용하여 출력급증량 및 출력증가율의 운전인자들의 함수로 검토하였다.

• 한국공간구조학회지
• /
• 제20권3호
• /
• pp.4-8
• /
• 2020

• 대한교통학회지
• /
• 제26권6호
• /
• pp.81-89
• /
• 2008

도시고속도로의 확대와 더불어 일반 간선도로에 접속되는 도시고속도로 진출램프 또한 증가하고 있으며, 진출램프가 혼잡한 간선도로 상에 접속시 간선도로에서의 차량 혼입으로 인한 혼잡 가중 및 이로 인한 진출램프에서의 대기행렬이 역류하여 도시고속도로 본선에 혼잡의 영향이 미치는 현상이 발생하고 있다. 이러한 문제를 해결하고자 본 연구에서는 도시고속도로 진출부 교차로 제어의 개념으로 접근하여 도시고속도로 진출차량을 포함한 간선도로에서의 교통상황(하류부 링크 포함)까지도 고려하여 간선도로가 포화된 경우, 진출램프가 포화된 경우, 간선도로와 진출램프 모두 포화된 경우로 나누어 각 교통상황별 제어전략의 효과를 분석하였으며, 제어전략의 효과에 영향을 미치는 기하조건을 반영하기 위하여 COSMOS에서 제시한 하류부 링크저장공간 200m를 기준으로 이상일 때와 이하일 때로 구분하여 전체 6가지 CASE에 대한 감응식 신호제어전략 적용 전 후의 효과를 평가하였다. 그 결과, 전체 네트워크 차원에서 하류부링크 저장공간 200m 이하일 때 CASE I${\sim}$III에서는 4.4%${\sim}$6.2%, 200m 이상일 때 CASE Ⅳ${\sim}$Ⅵ에서는 6.1%${\sim}$16.2%의 지체 감소 효과가 발생하였으며, 상대적으로 하류부 링크저장공간이 큰 네트워크에서 효과가 더욱 크게 발생한 것으로 분석되었다.

• 대한기계학회논문집A
• /
• 제21권4호
• /
• pp.673-678
• /
• 1997

Stress wave propagations in an elastic half space to a normal point force of ramp type in time are analyzed. The governing equations are transformed by applying the Laplace and Hankel transforms with respect to time and radial distance. The inversion of Laplace transforms are performed by employing the Cagniard-de Hoop method, where the Rayleigh waves at surface are obtained by including the residue terms. The stress waves computed at the location very cose to the surface are shown to be almost identical to the surface waves obtained by the residue method except the Rayleigh wavefront. It is found that at the surface, the stresses are dominated by the Rayleigh waves, whose amplitudes increase linearly with time when time is very large. It is also found that in the interior part, the radial stress has a logarithmic singularity at the shear wavefront, while tangential stress shows no singularity.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권4호
• /
• pp.471-476
• /
• 2015

This paper describes a CMOS hysteretic DC-DC buck converter with a constant switching frequency for mobile applications. The inherent problems of a large output ripple voltage that the conventional hysteretic DC-DC buck converters has faced have been resolved by using the proposed DC-DC buck converter which employed a ramp generator circuit to be able to increase a switching frequency. The proposed architecture enables the settling response time of charge pump circuit within the converter to become less than 6us suitable for mobile applications. The proposed DC-DC buck converter was implemented by using 0.35 um BCDMOS process and die size was $1.37mm{\times}1.37mm$. The measurement results showed that the proposed circuit received the input of 3.7 V and generated output of 1.2 V with the output ripple voltages less than 20 mV under load currents of 100~400 mA at the fixed switching frequency of 2 MHz. The maximum efficiency of the proposed hysteretic buck converter was measured to be around 93%.

• 한국지구과학회지
• /
• 제32권5호
• /
• pp.437-452
• /
• 2011

The Steptoean Positive Carbon Isotope Excursion (SPICE) is found in the Machari Formation which was interpreted to have been deposited on the middle to outer carbonate ramp environment. The Machari Formation is the Middle to Late Cambrian in age and distributed in the Yeongweol area, Gangweon Province, Korea. The SPICE event in the Machari Formation begins with the first appearance datum of trilobite Glyptagnostus reticulatus and ends with the first appearance of datum of trilobite Irvingella. The SPICE is found in approximately 120 m thick sequence and ${\delta}^{13}C$ values in the SPICE interval range from 0.6 to 4.4‰. The SPICE in the Machari Formation is interpreted to be caused by burial of organic matter in the sea floor and subsequent increase of $^{13}C$ isotope of the Late Cambrian ocean. The SPICE interval in the Machari Formation corresponds to the highstand to transgressive systems tracts.

• 한국전기전자재료학회논문지
• /
• 제28권4호
• /
• pp.271-275
• /
• 2015

The floodlighting assists the pilot in taxiing the aircraft into and out of the final parking position and provide lighting suitable for passenger to embark and debark and for personnel to load and unload cargo. It is composed of sodium lamps which is consuming high energy. It needs to develop a dedicated LED lamp to replace the existing lamps. In this paper, We propose a suitable asymmetric angle of LED lamps to avoid a pilot's glare and to meet the standard illumination. For this, we analyze asymmetric angle of sodium lamps which are using in airport and confirm whether the illumination distribution and glare index meet the relating standards by using simulation method. Also, we study the needs of asymmetric characteristics of LED ramp by simulating the LED lamps with and without asymmetric characteristics of ramp respectively. With the simulation result, finally we propose the best asymmetric angle of LED lamp to meet the average illumination standard, and avoid a pilot's glare.

• 한국전기전자재료학회논문지
• /
• 제33권5호
• /
• pp.386-392
• /
• 2020

In this study, the drift current characteristics of charged particles are analyzed for panels fabricated by varying the waveform biasing of the active particle loading method (APLM), which is a method driven by the electrophoretic principle of loading charged particles into a cell of a barrier rib-type electronic paper. We prepare 3 panels using APLM and 1 panel without APLM. The waveform of APLM uses square wave and ramp wave, and the step voltage wave is applied to the driving voltage. The drift currents measured from the square wave and ramp wave with the same period applied by APLM are 4.872 µC and 5.464 µC, respectively, and the ramp wave is shown to be relatively advantageous for loading charged particles that have a large q/m. The time-current curve results confirm that the abrupt movement of charged particles is occurring. When the step form wave signal with a short time of 1s is first applied, initial large movement of the charged particles is confirmed to occur in all samples, which is understood as the effect of applying the voltage necessary to remove the imaging force. The results of this study are expected to improve the loading of charged particles into the electronic paper cell, driven by the electrophoretic principle and optimization of the driving conditions.

• 대한전자공학회논문지
• /
• 제18권5호
• /
• pp.1-9
• /
• 1981

4-bit 전하결합 A/D 변환기에 대한 실험 결과를 제시하였다. Successive approximation algorithm 에 필요한 대개의 기능을 CCADC(charge coupled A/D converter)라는 mono-lithiic chip으로 실현하였다. CCADC는 P-channel 전하결합소자 제작기술에 의하여 만들어졌으며, Chip면적은 약 4,200 $mil^2$이었다. 동작 clock 주파수 범위는 500Hz ~ 200KHz로 나타났으며, 이 주파수 범위내에서는 약 2.4 Volt의 전신호 전압 구간을 1LSB/clok주기의 속도로 변하는 ramp 입력신호에 대하여 16가지의 binary code가 빠짐없이 관찰되었다. MSB단부터 LSB단의 순서로 정격 전하용량이 각각 3.6pC, 1.8pC, 0.9pC, 0.45pC인 4개의 연속된 potential well(M-well)간의 면적비를 (8:4:2:1)로 유지하기 위한 설계기술에 대하여 토론하였다. 끝으로, 제작된 A/D변환기에 있어서 과도한 conversion nonlinearity의 원인이 되는 dumpslot 효과에 대하여 설명하였으며, dump slot으로 인한 오동작을 막기 위한 방법으로서 slot zero 삽입방식을 제안하고 이에 대한 실험결과를 제시하였다.