• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.4
• /
• pp.457-466
• /
• 2013

Wind energy is rapidly becoming significant generating technologies in electricity markets. As probabilistic nature of wind energy creates many uncertainties in the short-term scheduling, additional actions for reliable market operation should be taken. This paper presents a novel approach to evaluate ramping capability requirement for changes in imbalance energy between day-ahead market and real-time market due to uncertainty of wind generation as well as system load. Dynamic ramp rate model has been applied for realistic solution in unit commitment problem, which is implemented in day-ahead market. Probabilistic optimal power flow has been used to verify ramping capability determined by the proposed method is reasonable in economic and reliable aspects. This approach was tested on six-bus system and IEEE 118-bus system with a wind farm. The results show that the proposed approach provides ramping capability information to meet both forecasted variability and desired confidence level of anticipated uncertainty.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.2
• /
• pp.77-83
• /
• 2004

Cross-talk noise which can occur between on-chip interconnects is significant factor which influence signal integrity. Therefore, this paper presents an analytical method for estimating maximum cross-talk noise. We consider inductance effect of interconnects and use arbitary ramp inputs to estimate noise magnitude exactly. Also, we have used a virtual source for the easy of analytically caculating maximum cross-talk noise from complex cross-talk noise model. The accuracy of the has been shown that be within 4.3 percent maximum relative error compared with the results of HSPICE simulation. Hence, this study can be utilized in various CAD tools for guaranteeing signal integrity.

• Advances in aircraft and spacecraft science
• /
• v.4 no.6
• /
• pp.651-677
• /
• 2017

For the past ten years' efforts have been made to introduce environmentally-friendly "green" electric-taxi and maneuvering airplane systems. The stated purpose of e-taxi systems is to reduce the taxiing fuel expenses, expedite pushback procedures, reduce gate congestion, reduce ground crew involvement, and reduce noise and air pollution levels at large airports. Airplane-based autonomous traction electric motors receive power from airplane's APU(s) possibly supplemented by onboard batteries. Using additional battery energy storages ads significant inert weight. Systems utilizing nose-gear traction alone are often traction-limited posing serious dispatch problems that could disrupt airport operations. Existing APU capacities are insufficient to deliver power for tractive taxiing while also providing for power off-takes. In order to perform comparative and objective analysis of taxi tractive requirements a "standard" taxiing cycle has been proposed. An analysis of reasonably expected tractive resistances has to account for steepest taxiway and runway slopes, taxiing into strong headwind, minimum required coasting speeds, and minimum acceptable acceleration requirements due to runway incursions issues. A mathematical model of tractive resistances was developed and was tested using six different production airplanes all at the maximum taxi/ramp weights. The model estimates the tractive force, energy, average and peak power requirements. It has been estimated that required maximum net tractive force should be 10% to 15% of the taxi weight for safe and expeditious airport movements. Hence, airplanes can be dispatched to move independently if the operational tractive taxi coefficient is 0.1 or higher.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.3
• /
• pp.353-359
• /
• 2009

This paper proposes a novel technique for calculating the security costs that properly includes ramping constraints in the operation of a deregulated power system. The ramping process is modeled by a piecewise linear function with certain assumptions. During this process, a ramping cost is incurred if the permissible limits are exceeded. The optimal production costs of the power producers are calculated with the ramping cost included, considering a time horizon with N-1 contingency cases using contingency constrained optimal power flow (CCOPF), which is solved by the primal-dual interior point method (PDIPM). A contingency analysis is also performed taking into account the severity index of transmission line outages and its sensitivity analysis. The results from an illustrative case study based on the IEEE 30-bus system are analyzed. One attractive feature of the proposed approach is that an optimal solution is more realistic than the conventional approach because it satisfies physical constraints, such as the ramping constraint.

• Journal of the Korean Society for Library and Information Science
• /
• v.38 no.4
• /
• pp.167-178
• /
• 2004

The purpose of the study is to identify the degree of relevancy on the facilities for the older persons in the public library buildings. To achieve the purpose, the study has researched and analyzed' the guidelines of the law contributing to the convenience of the handicapped, older persons, pregnant women etc(1999)' for the older persons accessing to the facilities in the public library buildings. And then, the older persons' physical standard sizes in 'Size Korea(1997)' are researched and reconfigured. The study has selected the 10 kinds in such facilities as followed : Door, Accessible Route, Stair, Elevator, Escalator, Ramp, Toilet Stall, Urinal, Table, and Post Box. As the result, the study has identified the relevancies of each facilities based on the older persons's physical standard sizes.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.64-71
• /
• 2005

To achieve efficient supersonic combustion within a manageable length, a successful fuel injection scheme must provide rapid mixing between fuel and airstream. In former days, various injection concepts have been investigated. Cavity flow is the open type, that is, length-to-depth ratio L/D=4.8, aft ramp angle is $22.5^{\circ}$. An experimental study on a transverse cross jet injection into a Mach 1.92 supersonic main stream which flows over a cavity was carried out to investigate the effect of the momentum flux ratio(J), the jet interaction characteristics, and the pressure distribution in the combustor and using the primary diagnostics : schlieren visualization and wall static pressure measurements. Fuel penetration height and jet interaction characteristics depend strongly on the momentum flux ratio.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.613-617
• /
• 2011

Korea Aerospace Research Institute has been designed and manufactured various thurst nozzles of the scramjet engine for optimized configuration. The test campaign for thurst nozzle characteristics was performed at T4 free-piston shock tunnel in University of Queensland, Australia. Total 8 kinds of thrust nozzles and 2 kinds of side walls were manufactured for this campaign. In this paper, the design and specification of thrust nozzles was reported. Based on the static pressure distribution of the engine and pitot pressure distributions at nozzle exit, The positive net thurst was observed with baseline case of the test campaign.

• Korean Institute of Interior Design Journal
• /
• no.41
• /
• pp.215-225
• /
• 2003

The residential and welfare facilities for the elderly are continuously increasing due to change of value on family under situation of aging population increase. And it is predicted that accommodation capacity of facilities for the elderly and its rate those facilities takes compared to whole social welfare facilities will be accelerated considering past increase speed. On the other hand, about 60% of the elderly have low physical and mental level almost close to disabled people therefore special environmental concerns helping their independent living are necessary. Among them, color application is one of the most important factors for smooth understanding, communication and psychological remedy effect for them. The purpose of this study is to analyze the interior color status in assisted living facilities for the elderly in America which is a leading country in terms of the understanding and policy for the elderly as a part of the research project to suggest the developed solution about the Korean residential welfare facilities for the elderly For this purpose, not only importance and effect of color and visual characteristics and reaction to color in elderly environment but also general concept and policy of the ‘assisted living facility’ in America were researched through documents review. And measuring of color on 5 main spaces such ; lobby/lounge, corridor, dining room, bedroom, stairway/ramp of the 10 facilities in America were performed under analysis of its functional and aesthetic level based on Moon & Spencer's color theory.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.5
• /
• pp.425-431
• /
• 2006

Recently, the government has adjusted the 4th National Master Plan in an effect to achieve balanced national land development. However, the current traffic accident index ranks among the lowest in OECD countries, ranking 25th out of 29 countries. Therefore, this study is aimed at indicating problems with National Expressway and local roads developing a solution by analyzing the problems and suggesting the most appropriate design speed for inter-changes where the traffic accidents occur frequently. With the results, it is to obtain a design speed decision formula at interchange branch points to prevent traffic accidents, secure safe and optimal road conditions and maximize traffic load capability.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.3
• /
• pp.53-59
• /
• 2012

Adiabatic demagnetization refrigerator (ADR) for hydrogen re-liquefaction operating between 24 K and 20 K has been designed. $Dy_{0.9}Gd_{0.1}Ni_2$, whose Curie temperature is 24 K, is selected as a magnetic refrigerant. The magnetic refrigerant powder is sintered with oxygen-free high purity copper (OFHC) powder to enhance its effective thermal conductivity as well as to achieve relatively high frequency. A perforated plate heat exchanger (PPHE) operated with forced convection is utilized as a heat switch. The forced convection heat switch is expected to have fast response relative to a conventional gas-gap heat switch. A conduction-cooled high Tc superconducting (HTS) magnet is employed to apply external magnetic field variation on a magnetic refrigerant. $2^{nd}$ generation GdBCO coated conductor HTS tape with Kapton$^{(R)}$ insulation (SUNAM Inc.) will be utilized for the HTS magnet. The magnetization and demagnetization processes are to be achieved by the AC operation of the HTS magnet. The designed magnetic field and target ramp rate of the HTS magnet are over 4 T with 180 A and 0.4 T/s, respectively. AC loss distribution on HTS magnet is theoretically estimated.