• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.147-153
• /
• 1992

This study was undertaken to investigate the cutting behaviour of super duralumin (A2024-T3) with sintered carbide tool(P20). The cutting test was carried out under different conditions such as cutting speed, cutting depth and rake angle, etc. The specific cutting force Kc and Kt of vertical and radial forces decreases as cutting speed increases, especially the decrease rate of Kt becomes larger than of Kc as cutting speed increases. Kc and Kt in small cutting depth are much affected by work-hardening of surface layer. The chip width and shear angle become layer as cutting depth increases, especially chip width at feed of 0.1mm almost approaches cutting width. Relation between the friction coefficient of chip side and tool rake angle side can make the modelization studying the built-up edge size. The shear angle model equation of super duralumin generally agree with theory of Ernst-Merchant.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.73-78
• /
• 1994

Wear and fracture mode of ceramic tool for hardened SKD11 steel was investigated by face milling in this study. The cutting force and Acoustic Emission(AE) signal were utilized to detect the wear and fracture of ceramic tool. The following conclusions were obtained : (1) The wear and fracture modes of ceramic tool are characterized by three types: \circled1wear which has normal wear and notch wear, \circled2 wear caused by scooping on the rake face, \circled3 large fracture caused by thermal crack in the rake face. (2) The wear behaviour of ceramic tool can be detected by the increase of mean cutting force and the variation of the AE RMS voltage. (3) The catastrophic fracture of ceramic tool can be detected by the cutting force(Fz-component). (4) As the hardness of work material increased, Acoustic Emission RMS value and mean cutting force(Fz) increased linearly, but the tool life decreased.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.270-273
• /
• 2002

This paper presents an effective cutting force model that enable us to predict the instantaneous cutting force in milling process from a knowledge of the work material properties and cutting conditions. The development of the model is based on the orthogonal machining theory with the effective rake angle which is defined in the plane containing the cutting velocity and chip flow vectors. Face milling tests are performed at different feeds and, a fairly good agreement is shown between the predicted cutting forces and test results.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.164-169
• /
• 2005

It is design and manufacture which the rake operated in and out of water. Also irrigation test result of several times, the flux inside the waterway collects 0.15m/s to case below the dirt which is accumulated in the rake 30kg, difficulty was to examine closely the thing, it followed hereupon and the grade in the agriculture waterway flux inside the cursor waterway was quick, or, with water level in dirt removal it established in the irrigation facility downstream it will be able to increase a flux, very the possibility of getting an efficient power it is it knew.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.65-68
• /
• 2001

In this paper a CI(carrier interferometry) chip waveform shaping scheme which Is made up of orthogonal carriers equally spaced in frequency, and used to introduce frequency diversity benefits into DS-CDMA, is considered. A new communication scheme referred to as CI/DS-CDMA using CI chip shaping, is introduced. Through the performance evaluation of CI/DS-CDMA systems in a typical frequency selective fading channel environment, it is shown that the frequency diversity benefits of this system results in significant performance enhancements relative to traditional DS-COMA with RAKE receivers using the path diversity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.9
• /
• pp.2173-2193
• /
• 2013

In order to reduce the distribution cost of sensor nodes, a mobile sensor deployment has been proposed. The mobile sensor deployment can be solved by finding the optimal layout and planning the movement of sensor nodes with minimum energy consumption. However, previous studies have not sufficiently addressed these issues with an efficient way. Therefore, we propose a new deployment approach satisfying these features, namely a tree-based approach. In the tree-based approach, we propose three matching schemes. These matching schemes match each sensor node to a vertex in a rake tree, which can be trivially transformed to the target layout. In our experiments, the tree-based approach successfully deploys the sensor nodes in the optimal layout and consumes less energy than previous works.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6B
• /
• pp.569-578
• /
• 2002

This paper proposes a new multicarrier code division multiple access (CDMA) system. The proposed multicarrier CDMA system provides the advantages that the transmission bandwidth is more efficiently utilized by using divided spreading sequence, time and frequency diversity is achieved in frequency selective nultipath (acting channel, and inter-carrier interference (ICI) can be minimized by using specific data and code pattern. In this system, transmitted data bits are serial-to-parallel converted to some parallel branches. On each branch each bit is direct-sequence spread-spectrum modulated by divided spreading sequences and transmitted using orthogonal carriers. The receiver providers a Rake for each carrier, and the outputs of Rakes are combined to get time and frequency diversity. This multicarrier CDMA system allows additional flexibility in the choice of system parameters. Upon varying system parameters, bit error rate (BER) performance is examined for the proposed multicarrier CDMA system. Simulation results show that the proposed multicarrier CDMA scheme can achieve better performance than the other types of conventional multicarrier CDMA systems.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.646-651
• /
• 2004

Crashworthy design of a train is a systematic approach to ensure the safety of passengers and crews in railway transportation for the prescribed accident scenarios. This approach needs new structural arrangements and designs to absorb higher levels of impact energy in a controlled manner and interior designs to minimize passenger injuries. In this paper, crashworthy design approach is applied to the tilting train express (TIX) design which is newly being developed. Based on a head-on collision and a level crossing collision scenarios, the crash behaviors of a TTX design candidate arc evaluated numerically using the finite element method. Finally, design alternatives which show better crashworthy performances are proposed and verified through the full-rake collision simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.1
• /
• pp.109-116
• /
• 1998

In this paper, a back propagation neural network teaming algorithm based on the complex multilyer perceptron is represented for suppressing narrowband interference of the received signals in DS-SS mobile communication system. We proposed neural network adaptive correlator(NNAC) which has fast convergence rate and good performance with combining back propagation neural network and the receiver of DS-SS. We analyzed and proved that NNAC has lower bit error probability than that of traditional RAKE receiver through results of computer simulation in the presence of the tone and narrow-band interference and the co-channel interference.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.05a
• /
• pp.150-154
• /
• 1998

CDMAPCS 시스템은 Rake 수신기를 이용만 경로 다이버시티를 채택하여 우수한 시스템 향상을 얻을 수 있어 주로 TDMA 시스템에서 적용하고 있는 등화기를 사용할 필요가 없다. 그러나 CDMA PCS 시스템의 역방향 링크에서는 순방향과는 달리 채널의 크기 및 위상 추정에 필요한 파이롯 채널이 없어 성능의 저하를 가져오게 된다. 따라서 역방향 링크에서 채널환경에 따라 Rake 수신기의 성능에 미치는 영향을 분석하는 것은 중요하다. 본 논문에서는 시스템 성능 및 광대역 채널 파라미터 분석을 위해 광범위한 라이브러리와 시스템 구성의 유연성을 가지고 있는 Ptolemy [1] 플랫폼에서 CDMA PCS 시스템의 역방향 링크 규격에 따라 각 블록을 사용자 정의로 구현하였다. Ptolemy 시뮬레이터를 이용하여 CDMA PCS 시스템의 역방향 링크 비트오율 성능을 채널의 특성과 연관지어 분석하였다. 그리고 가상할 수 있는 각 채널 모델을 이용하여 CDMA PCS 시스템의 성능과 광대역 채널 파라미터 (예: 지연확산)와의 상관 관계를 파악하였다. 본 연구에서 CDMA PCS 시스템에서는 일반적으로 알려져 있는 지연확산보다 평균지연 파라미터가 더 높은 상관 관계가 있음을 발견하였다.