Proceedings of the Korean Society of Precision Engineering Conference (한국정밀공학회:학술대회논문집)
- 1994.10a
- /
- Pages.73-78
- /
- 1994
- /
- 2005-8446(pISSN)
A Study on the Cutting Characteristics in the Machining of SKD11 by Face Milling
난삭재인 SKD11의 정면밀링 가공시 절삭특성에 관한 연구
Abstract
Wear and fracture mode of ceramic tool for hardened SKD11 steel was investigated by face milling in this study. The cutting force and Acoustic Emission(AE) signal were utilized to detect the wear and fracture of ceramic tool. The following conclusions were obtained : (1) The wear and fracture modes of ceramic tool are characterized by three types: \circled1wear which has normal wear and notch wear, \circled2 wear caused by scooping on the rake face, \circled3 large fracture caused by thermal crack in the rake face. (2) The wear behaviour of ceramic tool can be detected by the increase of mean cutting force and the variation of the AE RMS voltage. (3) The catastrophic fracture of ceramic tool can be detected by the cutting force(Fz-component). (4) As the hardness of work material increased, Acoustic Emission RMS value and mean cutting force(Fz) increased linearly, but the tool life decreased.
Keywords
- difficult-to-cut material;
- finish machining;
- ceramic tool;
- cutting force;
- tool wear;
- tool fracture;
- face milling