• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.154-159
• /
• 2008

Daylight is an important component for human and energy saving. Also, available daylight in inside provides positive influence on psychological and physiological aspects as well as good visual environment. It is important to lighting design for office building not only designing for artificial lighting but also using daylight for energy savings. Therefore, lighting designers and architectures must consider the effects of the daylight for human environment and energy savings. The BIN Method is one of the methods to predict energy savings using computer simulation but it spends more time than expectation. So, this study performs to simulate a simple space using the RADIANCE for examination and simplification of the BIN Method.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.91-95
• /
• 2002

This study is using the RADIANCE lighting simulation tool to determine the transmittance where the horizontal blind is installed. The transmittance is applied to DayDim program which is a lighting calculation and analysis tool. Parameters such as clear sky type, seasonal changes(the summer solstice), altitude, azimuth and horizontal blind angle at a 0$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$ were considered. The simulation results present that measured directional transmittances have different values according to each directional property of the horizontal blind.

• KIEAE Journal
• /
• 제5권3호
• /
• pp.3-9
• /
• 2005

Venetian blinds are used with windows to improve the uniformity ratio of illuminance and interior daylighting distribution under direct sunlit conditions. The main objective of Venetian blinds shading system is to obstruct direct sunlight and at the same time allow daylight to penetrate into the room. Venetian blinds would have greater effect on the interior daylighting condition under clear sky which has both skylight and sunlight than overcast sky which has only skylight. However, due to the lack of data, design and evaluation tools, it is difficult for architects to choose or install venetian blinds during the building design stages. The purpose of this study was to develop an analysis method for shading and daylighting effects of Venetian blinds using the RADIANCE program. The major variables related to the venetian blinds included blinds's slat angle and the ratio of slat width to window height, the radius slat of curvature and the building azimuth. In this study, a series of parametric physical mock-up model measurements and genblinds command in the RADIANCE simulations. The results of this study will provide building designers with the design data at early design stages.

• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.77-84
• /
• 2009

Daylighting is one of the major elements in architectural design. It also plays an important role in the museums focused on displaying artistic works. Many architects have tried to predict daylighting performances in exhibition spaces during the design process of museums. The aims of this study are to present the design methods using the computer program RADIANCE that is available for the evaluations of daylighting performances in indoor space and to help architects design daylighting systems for better exhibition spaces of museums. For this study, Seoul Museum of Art was chosen and it was evaluated the recommended illuminance and the impacts of direct sunlight under the conditions of overcast sky and clear sky with sun. According to simulation results, they indicated that the alternative toplight system(sawtooth shape) was more effective for daylighting of exhibition spaces than the existing toplight system(pyramid shape) and this study showed a method to evaluate daylighting effects in exhibition spaces with various shapes of toplight systems.

• 조명전기설비학회논문지
• /
• 제17권6호
• /
• pp.7-15
• /
• 2003

본 연구는 RADIANCE 프로그램을 이용하여 블라인드가 설치된 창문의 투과율을 휘도계산을 통해 결정하고자 한다. 천공의 종류, 계절의 변화, 태양의 고도 및 방위각의 변화, 블라인드의 각도 0$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$등을 매개변수로 고려하였고, 시뮬레이션에 의한 블라인드 투과율은 블라인드 방향성 등의 특성에 따라 다양한 결과로 나타났다. 이러한 결과를 조명계산과 광센서 조광제어시스템의 분석 도구로 사용될 수 있는 프로그램인 DayDim에 적용할 수 있는 방법론을 제시하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.239-242
• /
• 2002

With existing illumination rendering system being used in domestic, internationally developed common programs are taking over the market more than 90%. However, since the programs are established with DB designed to be most suitable for their own products, accuracy in analysis and visualized image are hardly reliable. This raises the necessities of establishing DB for domestic developed products. A method of establishing artificial luminair DB, which was studied on DB establishment in consideration of optical characteristics of domestic products with using RADIANCE program was presented in this study, and it is considered as the program of simulating light movement most accurately among all rendering programs developed so far.

• KIEAE Journal
• /
• 제13권5호
• /
• pp.59-66
• /
• 2013

Current Architectural Facade Designs have been trending to increased glass areas resulting in increasing impact on interior lighting and daylighting. In regards to indoor environmental quality, the increase in window space has a large impact on the daylighting received which ultimately impacts the liveability of a space. Especially when considering seasons, in the summer, excessive daylighting can result in glare as well as put an increased load in conditioning the air space further reducing energy efficiency. As a result, in order to improve the sustainability performance of a building, it is important to limit the natural lighting exposure to properly meet the needs and conditions of the building occupants. One of the most representative features to limit excessive sunlight exposure, is to incorporate operable blind systems. To this end, this research has been based on simulations performance through the Radiance Program. Radiance is capable of analyzing performance of daylight and impact of sunlight. Through analysis of different slat angles and blind shapes, impact and minimization of energy usage was evaluated. Furthermore, seasonal analysis was performed in order to understand the effects of seasonal climate factors. Ultimately this research provides an analysis of operable blinds optimization and effects of blind shape, control factors and angle of shading.

• 한국태양에너지학회 논문집
• /
• 제36권3호
• /
• pp.33-43
• /
• 2016

Daylight is an important factor which influences building energy efficiency and visual comfort for occupants. It is important to predict precise sky luminance at the early stages of design to reduce light energy in the building. This study predicted sky luminance distributions of standard sky model(CIE overcast sky, CIE clear sky) that was provided from the CIE(Commission internationale de $l^{\prime}{\acute{e}}clairage$). Afterward, result of sky luminance was compared and verified with simulation value of Radiance program. From the CIE overcast sky, zenith and horizon ratio is about 3:1. From the CIE clear sky, luminance value gets most high value around the sun. On the other hand, luminance value is the lowest in the opposite direction of the sun when angle is $90^{\circ}$ between the sun and sky element. As a result of comparing the calculation results with Radiance program, sky luminance prediction error rate is 0.4~1.3% when it is CIE overcast sky. Also, sky luminance prediction error rate is 0.3~1.5% when it is CIE clear sky. When compared with the results of radiance simulation, it was evaluated as fairly accurate.

• 조명전기설비학회논문지
• /
• 제18권5호
• /
• pp.1-8
• /
• 2004

현재 빛환경의 평가도구로서 사용하고 있는 여러 조명 시뮬레이션 프로그램들은 대부분 국외에서 생산되고 있는 조명기구의 데이터를 바탕으로 하고 있다. 그렇게 때문에 국내 환경에 맞는 빛환경의 정확한 평가에는 한계를 가지고 있다. 본 연구의 진행은 사용자들의 편의성을 도모하기 위하여 실무에서 많이 활용되고 있는 조명기구를 선별하여 종류별로 분류하였다. 그리고 국내에서 생산되고 있는 조명기구의 데이터 수집을 바탕으로 RADIANCE 엔진을 이용하여 인터넷 웹기반 가시화 시스템 개발을 위한 조명기구의 데이터베이스를 구축하였다.

• 조명전기설비학회논문지
• /
• 제19권1호
• /
• pp.1-8
• /
• 2005

건축물은 건축자재의 선택과 사용에 따라서 전혀 다른 이미지로 보여 질 수 있다. 건축물을 설계하는 과정에서 건축물을 검증하거나 가시화된 이미지를 얻어내기 위해서 여러 가지 시뮬레이션 프로그램들을 사용하고 있다. 하지만 대부분의 시뮬레이션 프로그램은 국외에서 생산되는 건축자재정보에 대한 데이터들로 이루어져 있기 때문에 국내의 환경에 맞게 적용하는데는 많은 어려움이 따른다. 본 논문에서는 국내에서 생산되고 사용되어지는 많은 건축자재를 바탕으로 데이터를 수집하고, 건축자재가 가진 광학적 특성을 측정하여 데이터베이스 구축을 위한 방안을 제시하였다. 최종적으로 RADIANCE 엔진을 이용하여 개발된 인터넷 웹기반 가시화 시스템에 구축된 국내 건축자재의 데이터베이스를 적용하였다.