• 제목/요약/키워드: R502

검색결과 162건 처리시간 0.021초

Si 기판에서 원자층 화학 기상 증착법으로 제조된 Al2O3 및 ZrO2 유전 박막의 결정학적 특성 및 계면 구조 평가 (Crystallographic and Interfacial Characterization of Al2O3 and ZrO2 Dielectric Films Prepared by Atomic Layer Chemical Vapor Deposition on the Si Substrate)

  • 김중정;양준모;임관용;조홍재;김원;박주철;이순영;김정선;김근홍;박대규
    • 한국재료학회지
    • /
    • 제13권8호
    • /
    • pp.497-502
    • /
    • 2003
  • Crystallographic characteristics and interfacial structures of $Al_2$$O_3$and $ZrO_2$dielectric films prepared by atomic layer chemical vapor deposition (ALCVD) were investigated at atomic scale by high-resolution transmission electron microscopy (HRTEM) and energy dispersive X-ray spectroscopy (EDS)/electron energy-loss spectroscopy (EELS) coupled with a field-emission transmission electron microscope. The results obtained from cross-sectional and plan-view specimens showed that the $Al_2$$O_3$film was crystallized by annealing at a high temperature and its crystal system might be evaluated as either cubic or tetragonal phase. Whereas the $ZrO_2$film crystallized during deposition at a low temperature of ∼$300^{\circ}C$ was composed of both tetragonal and monoclinic phase. The interfacial thickness in both films was increased with the increased annealing temperature. Further, the interfacial structures of X$ZrO_2$$O_3$and $ZrO_2$films were discussed through analyses of EDS elemental maps and EELS spectra obtained from the annealed films, respectively.

측두하악장애와 경부근육 압통 간의 상관성 (Association Between Temporomandibular Disorders and Cervical Muscle Pressure Pain)

  • 임영관;김재형;김병국
    • Journal of Oral Medicine and Pain
    • /
    • 제33권4호
    • /
    • pp.339-352
    • /
    • 2008
  • 목적: 측두하악장애 환자들에서 압통 검사를 통하여 경부근육 통증의 정도와 위치를 파악하고, 측두하악장애와 경부근육 통증과의 관련성을 규명하고자 하였다. 방법: 측두하악장애 환자(n=129, 여자 65.9% 평균=28.8세)에 대해서 두통, 목의 통증, 정서적 스트레스, 수면 장애, 이상 기능 습관 및 통증 강도에 대한 설문을 실시하였다. 저작계에 대하여 하악 운동범위, 악관절음, 악관절 촉진, 저작근 촉진 검사를 시행하였다. 빗목근 상부(sternocleidomastoid upper), 빗목근 중간(sternocleidomastoid middle), 등세모근 상부(upper trapezius), 머리널판근(splenius capitis), 머리반가시근(semispinalis capitis), 중간 목갈비근(scalene medius), 어깨올림근(levator scapulae)의 7부위의 경부 근육에 대하여 촉진에 의한 압통 검사를 하였다. 압통의 정도를 무통(0), 경도(1), 중등도(2), 심도(3)로 구분하여 판정하였다. 압통점수로부터 여러 통증점수 합계를 계산한 후 이후의 통계분석에 사용하였다. 결과: 80명(62.0%)의 환자가 설문에서 목의 통증을 경험한다고 답하였다. 측두하악장애 통증 점수와 경부 근육통 점수 간에는 유의한 상관관계가 있었다(r=0.538, P < 0.001). 경부 근육 중에서 중등도 이상의 압통이 40% 이상 발생하는 근육은 빗목근과 등세모근 상부였고 저작근 중에서는 깨물근(masseter) 중간에서 36%의 중등도 통증이 나타났다. 129명에 대한 경부근육통점수합과 측두하악장애통증점수합 사이에는 상당한 관련성이 있었으며($\rho$=0.502, P < 0.001), 측두하악장애통증점수합은 경부근육통점수합이 증가함에 따라 함께 증가하는 경향을 보였다(Y = 0.395 ${\cdot}$ X, $R^2$ = 0.659, P < 0.001). 저작근장애 환자에서 빗목근등세모근상부통증점수합과 관자근교근통증점수합은 중등도의 관련성($\rho$ = 0.375, P < 0.001)을 보였으며, 두 변수는 비례 관계에 있었다(Y = 0.359 ${\cdot}$ X, $R^2$ = 0.538, P < 0.001). 편측통증점수의 편상관관계분석에서 우측경부근육통증점수합과 좌측경부근육통증점수합은 가장 높은 상관성(r=0.802, P < 0.001)을 보였다. 우측측두하악장애통증점수합과 좌측측두하악장애통증점수합은 중등도의 상관성(r=0.481, P < 0.001)이 있었다. 편측성 측두하악장애 통증이 있는 20명의 환자에 대한 편상관관계분석에서 우측과 좌측의 편측경부근육통점수간의 상관성이 가장 높았고(r = 0.597, P = 0.009), 측두하악장애측통증점수합과 동측경부근육통증점수합 사이의 상관성(r = 0.564, P = 0.015)이 그 다음이었다. 결론: 측두하악장애 통증은 촉진에 의한 압통반응의 측면에서 경부근육 통증과 관련성을 보인다. 경부근육 중에서 빗목근과 등세모근상부가 중등도 이상의 통증을 흔하게 나타내며 저작근통증과 밀접한 관련이 있다. 경부근육에서는 통증의 대칭적인 이환 특성이 두드러지지만, 측두하악장애가 경부근육통의 수준에 영향을 주어 대칭적인 특성을 변화시킬 수 있다. 두부와 경부에 복잡한 통증 질환의 증상과 징후를 보이는 환자에서 경부 근육 통증의 진단과 치료에 관심을 가져야 한다.

컨테이너 보안 장치(ConTracer)에 활용되는 2.45GHz 및 GPS 안테나 통합 보드 설계에 관한 연구 (A Study on Design of 2.45GHz and GPS antenna Integrated Board using Container security Device(ConTracer))

  • 이은규;문영식;신중조;손정락;최성필;김재중;최형림
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 춘계학술대회
    • /
    • pp.502-505
    • /
    • 2011
  • 본 논문에서는 컨테이너화물 안전수송에 사용되는 ConTracer에 활용할 2.45GHz 및 GPS 통합 안테나 보드를 설계하고자 한다. 설계된 통합 안테나 보드는 컨테이너 도어에 적용하고자 컨테이너 도어에 해당되는 모형 모델링하여 철재물에 대한 RF 영향에 대해 시뮬레이션하여 그 결과를 반영하여 2.45GHz 안테나 보드를 설계하였으며 GPS 안테나는 세라믹 재질로 제작하였다. 적용하는 ConTracer라는 것은 각 컨테이너화물의 정보를 거점별 리더기로 서버측에 전송하는 장비로서, 항만 물류산업에 크게 활용되는 장치이다. 이 ConTracer 장비에 사용되는 2.45GHz 및 GPS 안테나 보드는 컨테이너 환경에 초점을 맞춰 설계할 필요가 있으며 컨테이너 재질(전부금속), 컨테이너에 실장되는 RF 모듈단의 크기와 접지를 모두 고려한 통합 안테나 보드 설계가 필요하다. 따라서 본 논문은 컨테이너 도어 부분만 모델링하여 최적의 안테나 파라미터들의 성능이 구현될 수 있도록 2.45GHz 안테나 보드를 제작하고 세라믹 재질로 GPS 안테나를 제작하여 그 특성을 측정하였다.

  • PDF

종간직접전자전달 전도체로서 Magnetite(Fe3O4)가 음폐수의 메탄생산에 미치는 영향 (Effects of Magnetite(Fe3O4) as Electrical Conductor of Direct Interspecies Electron Transfer on Methane Yield of Food Wastewater)

  • 이준형;김태봉;김창현;윤영만
    • 유기물자원화
    • /
    • 제31권1호
    • /
    • pp.15-26
    • /
    • 2023
  • 혐기소화에 의한 메탄생산은 유기물이 가수분해, 산생성 단계를 거쳐 아세트산생성균과 메탄생성균 간의 영양공생 (syntrophy)에 의해 일어난다. 본 연구에서는 종간 영양공생 기작인 종간직접전자전달 (DIET, Direct Interspecies Electron Transfer) 과정을 촉진시키기 위하여 전도체인 마그네타이트 (Fe3O4) 첨가가 음폐수의 메탄생산에 미치는 영향을 파악하고자 하였다. 이를 위해, 본 연구에서는 회분식 혐기반응기를 이용하여 마그네타이트 투입량에 따른 음폐수의 메탄퍼텐셜 (Bu)과 최대메탄생산속도 [Rm(t0)]를 분석하였다. 마그네타이트 무처리구의 메탄퍼텐셜은 0.496 Nm3/kg-VSadded이었으며, 21.06일에 38.24 mL/day의 최대메탄생산속도를 보였다. 마그네타이트 5, 10, 15, 20, 25, 30, 40, 70, 100mM 처리구의 메탄퍼텐셜은 각각 0.502, 0.498, 0.512, 0.510, 0.518, 0.523, 0.524, 0.540, 0.549 Nm3/kg-VSadded이었으며, 마그네타이트 투입량 증가에 따라 유의성 있는 메탄퍼텐셜의 증가 경향을 보였다. 최대메탄생산속도는 무처리구와 비교하여 마그네타이트 처리구에서 증가하였으며 15mM 처리구에서 36.95%까지 증가하였다. 또한, 마그네타이트 투입농도가 증가함에 따라 최대메탄생산속도에 도달하는 기간(t0)은 무처리 21.06일에서 마그네타이트 100mM 처리 14.67일로 크게 단축되었다. 따라서, 마그네타이트 투입에 따른 음폐수의 메탄퍼텐셜과 최대메탄생산속도가 크게 향상되었다.

IT중소기업의 핵심역량이 기업성과에 미치는 영향에 관한 연구 : 기업가 정신과 정부지원의 조절효과 (The Influence of Core Competence on Organizational Performance of IT Small and Medium Enterprises : The Moderating Role of Entrepreneurship and Government Support)

  • 노두환;박호영
    • 한국IT서비스학회지
    • /
    • 제14권1호
    • /
    • pp.23-40
    • /
    • 2015
  • The purpose of this study is to analyze the influence of core competences on organizational performance in small and medium sized IT enterprises. Especially, the moderating effects of entrepreneurship and government support variables between the core competences and organizational performance were examined. To empirically prove the hypothesis, the statistical analysis were conducted based on the response from the 502 Korean domestic IT SMEs, using AMOS 18.0 and SPSS 20.0. The results of this empirical study can be summarized as follows. First, core competences (marketing, networking, and technology competence) have positive influence on organizational performance. Second, entrepreneurship and government support have moderating effects in the relationship between core competence and organizational performance. Especially, network and marketing competence appeared to be affected by more entrepreneurship than technology competence. So this paper suggests that when the R&D of SMEs and government support are properly combined, it will directly give an effect on organizational performance. The results of this research can be used for building a better government support policies and strategic planning of small and medium sized domestic IT enterprises.

Animal Model Versus Conventional Methods of Sire Evaluation in Sahiwal Cattle

  • Banik, S.;Gandhi, R.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제19권9호
    • /
    • pp.1225-1228
    • /
    • 2006
  • A total of 1,367 first lactation records of daughters of 81 sires, having 5 or more progeny were used to evaluate sires by 3 different methods viz., least squares (LS), best linear unbiased prediction (BLUP) and derivative free restricted maximum likelihood (DFREML) method. The highest and lowest overall average breeding value of sires for first lactation 305 days or less milk yield was obtained by BLUP (1,520.72 kg) and LS method (1,502.22 kg), respectively. The accuracy, efficiency and stability of different sire evaluation methods were compared to judge their effectiveness. The error variance of DFREML method was lowest ($191,112kg^2$) and its coefficient of determination of fitting the model was highest (33.39%) revealing that this method of sire evaluation was most efficient and accurate as compared to other methods. However, the BLUP method was most stable amongst all the methods having coefficient of variation (%) very near to unadjusted data (18.72% versus 19.89%). The higher rank correlations (0.7979 to 0.9568) between different sire evaluation methods indicated that there was higher degree of similarity of ranking sires by different methods ranging from about 80 to 96 percent. However, the DFREML method seemed to be the most effective sire evaluation method as compared to other methods for the present set of data.

2종의 엽록소 측정기를 이용한 포장내 벼의 엽록소 함량 분포 측정 (Measurement of Variability of Chlorophyll Contents in Paddy Fields Using Two Kinds of Chlorophyll Meter)

  • 성제훈;서상룡;박우풍;정인규;김상철;이충근
    • Journal of Biosystems Engineering
    • /
    • 제28권3호
    • /
    • pp.245-252
    • /
    • 2003
  • This study was investigated the possibility of measuring chlorophyll in paddy crops using two kinds of chlorophyll meters(SPAD-502, Field Scout). The results of correlation analysis showed the 0.7758(r$^2$) relationship between the chlorophyll contents of paddy leaves measured by SPAD and spectrophotometer. It indicates that chlorophyll content in paddy crops could be measured using the SPAD. Considering the data of the SPAD and Field Scout there was significant difference between their chlorophyll contents measured by the SPAD and Field Scout. Likewise, such results were consistent with the corrected data using light intensity. According to the results, it can be concluded that it is difficult to describe the rice chlorophyll measured by the Field Scout more accurately than the SPAD when using one standard spectrum and another spectrum for reflectance measuring. The chlorophyll variance measured at a research institute and a farmer's field revealed that the output of SPAD was more reliable than that of the Field Scout.

Ag첨가에 따른 $Pb(Zr,Ti)O_3-Pb(Mn,W,Sb,Nb)O_3$의 유전 및 압전 특성 (Dielectric and piezoelectric properties of Ag doped $Pb(Zr,Ti)O_3-Pb(Mn,W,Sb,Nb)O_3$ Ceramics)

  • 정현우;임성훈;이은선;전창성;이상렬
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
    • /
    • pp.117-120
    • /
    • 2004
  • The dielectric and piezoelectric properties of silver doped $Pb(Zr,Ti)O_3-Pb(Mn,W,Sb,Nb)O_3$ ceramics was examined. By varying the contents of silver(0.0, 0.4, 1.0 mol%), the effect of doped silver on PZT-PMWSN thin film was investigated at various sintering temperature(900, 1000, $1100^{\circ}C$). As increasing silver contents, the relative dielectric constant is increased and sinterbility is enhanced. At the specimen with 0.4 mol% Ag and sintered at $1100^{\circ}C$, electromechanical coupling factor(kp), mechanical quality factor(Qm), dielectric constant(${\varepsilon}r$) and dielectric loss were 0.502, 811, 991, 0.006, respectively. The results show that the PZT-PMWSN/Ag composites have enhanced piezoelectic and dielectric properties and processing condition is improved.

  • PDF

The French Underground Research Laboratory in Bure: An Essential Tool for the Development and Preparation of the French Deep Geological Disposal Facility Cigéo

  • Pascal Claude LEVERD
    • 방사성폐기물학회지
    • /
    • 제21권4호
    • /
    • pp.489-502
    • /
    • 2023
  • This article presents the crucial role played by the French underground research laboratory (URL) in initiating the deep geological repository project Cigéo. In January 2023, Andra finalized the license application for the initial construction of Cigéo. Depending on Government's decision, the construction of Cigéo may be authorized around 2027. Cigéo is the result of a National program, launched in 1991, aiming to safely manage high-level and intermediate level long-lived radioactive wastes. This National program is based on four principles: 1) excellent science and technical knowledge, 2) safety and security as primary goals for waste management, 3) high requirements for environment protection, 4) transparent and open-public exchanges preceding the democratic decisions and orientations by the Parliament. The research and development (R&D) activities carried out in the URL supported the design and the safety demonstration of the Cigéo project. Moreover, running the URL has provided an opportunity to gain practical experience with regard to the security of underground operations, assessment of environmental impacts, and involvement of the public in the preparation of decisions. The practices implemented have helped gradually build confidence in the Cigéo project.

Makeham분포에 의존한 신뢰성모형에 근거한 학습효과 특성에 관한 비교 연구 (A comparative study on learning effects based on the reliability model depending on Makeham distribution)

  • 김희철;신현철
    • 한국정보전자통신기술학회논문지
    • /
    • 제9권5호
    • /
    • pp.496-502
    • /
    • 2016
  • 본 논문에서는 소프트웨어 제품을 개발하여 테스팅을 하는 시행에서 소프트웨어 운용자들이 소프트웨어 검사 도구에 적용할 수 있는 학습기법에 근거한 NHPP 소프트웨어 모형에 대하여 비교 연구 하였다. 수명분포는 Makeham 분포를 이용하고 유한고장 NHPP모형을 적용하였다. 소프트웨어 오류 탐색 방법은 미리 인지하지 못하지만 자동적으로 발견되는 에러에 영향을 주는 영향요인과 사전경험에 기초하여 에러를 관찰하기 위하여 테스팅 운용자가 미리 설정해놓은 요인인 학습효과의 영향에 대한 문제를 비교 분석하였다. 그 결과 학습요인이 자동 에러 탐색요인보다 큰 경우가 일반적으로 효율적인 모형으로 나타났다. 본 논문의 신뢰특성분석에서는 소프트웨어고장시간을 적용하고 모수추정 방법은 최우추정법을 적용하고 추세분석을 통하여 자료의 신뢰성을 확보한 이후에 평균제곱오차와 $R^2$ (결정계수)를 적용하여 효율적인 모형을 선택 비교 분석하였다. 이 연구를 통하여 소프트웨어 운영자들은 다양한 학습효과를 고려함으로서 소프트웨어 고장추세에 대한 기본지식을 파악하는데 하나의 지침으로 사용가능함을 보여주고 있다.