• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.1
• /
• pp.57-61
• /
• 1994

The study was conducted at low lying areas in Pabna Sirajgong districts of Bangladesh. To observe the potentiality of bio-mass production two trials were conducted. In first trial maize intercropped with Khesari taking 15 experimental plots of each size $5m{\times}5m$ were arranged in 5 blocks having homogenous soil characteristics. The study showed that the bio-mass yield of sole maize and sole Khesari were 35.25 t/ha. and 56.80 t/ha. respectively and there was a significant difference (p < 0.01) among them. The results also showed that bio-mass yield of maize and Kherasi was higher ($70.04{\pm}6.25t/ha$, $98.88{\pm}10.77t/ha$ and $80.56{\pm}9.5t/ha$) compared to sole maize and sole Khesari and land equivalent ratio was also lower. For second trial, one hectare of land was divided into 16 experimental plots with 4 replications in each plot. Four levels of urea (0 kg/ha, 30 kg/ha, 45 kg/ha, and 60 kg/ha.) were applied to experimental plot. The seed rates were 98.8 kg/ha (farmer's practice), 86.45 kg/ha, 74.1 kg/ha and 61.75 kg/ha. average bio-mass yield of matikalai at different seed rates along with urea fertilizer ranged from 38.49 t/ha, to 65.35 t/ha. the highest seed rate along with highest fertilizer also correspond to the peak production (65.35 t/ha) and the lowest seed rate (61.75 kg/ha) along with the lowest fertilizer rate (30 kg/ha.) showed lowest production (38.49 t/ha.). Here, it was found that the bio-mass yield of matikalai increased with the incremental amount of seed, indicating significant effect (p < 0.05) of seed rates on the bio-mass yield of matikalai. On the other hand, fertilizer doses in different treatment combinations had significant effect (p < 0.05) on bio-mass yield. Two levels of seed rates at zero level of fertilizer were recommended : 86.45 kg/ha for the resource rich farmers and 61.75 kg/ha for the resource poor farmers.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.5
• /
• pp.642-655
• /
• 2013

In this study, semi-continuous measurements of $PM_{2.5}$ mass, organic and elemental carbon (OC and EC), black carbon (BC), and ionic species concentrations were made for the period of April 03~13, 2012, at a South Area Supersite at Gwangju. Possible sources causing the high concentrations of major chemical species in $PM_{2.5}$ observed during a haze episode were investigated. The measurement results, along with meteorological parameters, gaseous pollutants data, air mass back trajectory analyses and PSCF (potential source contribution function) results, were used to study the haze episode. Substantial enhancements of OC, EC, BC, $K^+$, $SO{_4}^{2-}$, $NO{_3}{^-}$, $NH{_4}{^+}$, and CO concentrations were closely associated with air masses coming from regions of forest fires in southeastern China, suggesting likely an impact of the forest fires. Also the PSCF maps for EC, OC, $SO{_4}^{2-}$, and $K^+$ demonstrate further that the long-range transport of smoke plumes of forest fires detected over the southeastern China could be a possible source of haze phenomena observed at the site. Another possible source leading to haze formation was likely from photochemistry of precursor gases such as volatile organic compounds, $SO_2$, and $NO_2$, resulting in accumulation of secondary organic aerosol, $SO{_4}^{2-}$ and $NO{_3}{^-}$. Throughout the episode, local wind directions were between 200 and $230^{\circ}C$, where two industrial areas are situated, with moderate wind speeds of 3~5 m/s, resulting in highly elevated concentration of $SO_2$ with a maximum of 15 ppb. The $SO{_4}^{2-}$ peak occurring in the afternoon hours coincided with maximum ambient temperature ($24^{\circ}C$) and ozone concentration (~100 ppb), and were driven by photochemistry of $SO_2$. As a result, the pattern of $SO{_4}^{2-}$ variations in relation to wind direction, $SO_2$ and $O_3$ concentrations, and the strong correlation between $SO_2$ and $SO{_4}^{2-}$ ($R^2=0.76$) suggests that in addition to the impact of smoke plumes from forest fires in the southeastern China, local $SO_2$ emissions were likely an important source of $SO{_4}^{2-}$ leading to haze formation at the site.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.6
• /
• pp.253-266
• /
• 2020

The extended slip-weakening model was investigated by using a compiled set of source-spectrum-related parameters, i.e. seismic moment M_o, S-wave velocity V_s, corner-frequency f_c, and source-controlled high-cut frequency fmax, for 113 shallow crustal earthquakes (focal depth less than 25 km, M_W 3.0~7.5) that occurred in Japan from 1987 to 2016. The investigation was focused on the characteristics of stress drop, radiation energy-to-seismic moment ratio, radiation efficiency, and fracture energy release rate, G_c. The scaling relationships of those source parameters were also investigated and compared with those in previous studies, which were based on generally used singular models with the dimensionless numbers corresponding to f_c given by Brune and Madariaga. The results showed that the stress drop from the singular model with Madariaga's dimensionless number was equivalent to the breakdown stress drop, as well as Brune's effective stress, rather than to static stress drop as has been usually assumed. The scale dependence of stress drop showed a different tendency in accordance with the size category of the earthquakes, which may be divided into small-moderate earthquakes and moderate-large earthquakes by comparing to M_o = 10¹⁷~10¹⁸ Nm. The scale dependence was quite similar to that shown by Kanamori and Rivera. The scale dependence was not because of a poor dynamic range of recorded signals or missing data as asserted by Ide and Beroza, but rather it was because of the scale dependent V_r-induced local similarity of spectrum as shown in a previous study by the authors. The energy release rate G_c with respect to breakdown distance D_c from the extended slip-weakening model coincided with that given by Ellsworth and Beroza in a study on the rupture nucleation phase; and the empirical relationship given by Abercrombie and Rice can represent the results from the extended slip-weakening model, the results from laboratory stick-slip experiments by Ohnaka, and the results given by Ellsworth and Beroza simultaneously. Also the energy flux into the breakdown zone was well correlated with the breakdown stress drop, ${\tilde{e}}$ and peak slip velocity of the fault faces. Consequently, the investigation results indicate the appropriateness of the extended slip-weakening model.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.5 s.305
• /
• pp.27-34
• /
• 2005

Ventricular fibrillation(VF) is generally caused by chaotic behavior of electrical propagation in heart and may result in sudden cardiac death. In this study, we proposed a ventricular fibrillation detection algorithm based on support vector machine classifier, which could offer benefits to reduce the teaming costs as well as good classification performance. Before the extraction of input features, raw ECG signal was applied to preprocessing procedures, as like wavelet transform based bandpass filtering, R peak detection and segment assignment for feature extraction. We selected input features which of some are related to the rhythm information and of others are related to wavelet coefficients that could describe the morphology of ventricular fibrillation well. Parameters for SVM classifier, C and ${\alpha}$, were chosen as 10 and 1 respectively by trial and error experiments. Each average performance for normal sinus rhythm ventricular tachycardia and VF, was 98.39%, 96.92% and 99.88%. And, when the VF detection performance of SVM classifier was compared to that of multi-layer perceptron and fuzzy inference methods, it showed similar or higher values. Consequently, we could find that the proposed input features and SVM classifier would one of the most useful algorithm for VF detection.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.3
• /
• pp.1-11
• /
• 1999

It is now common practice to utilize the quadrature RF coils to improve the signal-to-noise ratio (SNR) in the Magnetic Resonance Imaging (MRI) System. In addition, to make such an available SNR improvement, it is mandatory to use a well-designed quadrature coupler, which facilitates a perfect 3-dB coupling and quadrature-phase shift. However, the four ports matching condition has to be well considered during the RF excitation and the signal detection period. This work investigates the effects of such a mismatching condition (especially, due to patient) from the analysis, simulation, and real implementation and firstly proposes dynamic loading technique for a quadrature coupler and transmitting/receiving switch module to minimize a patient mismatching and enhance a system reliability. Also, we designed and implemented the quadrature coupler and transmitting/receiving switch module using microstrip. As a result, the SNR of our MRI system using the microstrip quadrature coupler and transmitting/receiving switch module with dynamic load increases 3 dB compared with the old one using USA quadrature switch. Also, the power capability of quadrature coupler and transmitting/receiving switch module is 5-kw peak power. Considering power loss and reduction of size, we used a RT/duroid 6010 substrate with high permittivity and for simulation we use Compact Software.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.107-112
• /
• 1994

The phase transition and the surface and interface morphologies of $TiSi_2$ formed on atomically clean Si substrates are investigated. 200$\AA$ Ti and 400$\AA$ Si films on Si(ll1) have been codeposited at elevated temperatures (400~$800^{\circ}C$) in ultrahigh vacuum. The phase transition of TiSiL is characterized with using XRD. The results distinguish the formation of the C49 and C54 crystalline titanium silicides. The surface and interface morphologies of titanium silicides have been examined with SEM and TEM. A relatively smootb surface is observed for the C49 phase while a rough surface and interface are observed for C54 phase. The islanding of the C54 phase becomes severe at high temperature ($800^{\circ}C$). Islands of TiSiL have been observed at temperatures above $700^{\circ}C$ but no islands are observed at temperatures below $600^{\circ}C$. For films deposited at $400^{\circ}C$ and 500%. weak XRD peaks corresponding to TiSi were observed and TEM micrographs exhibited small crystalline regions of titanium silicide at the interface.

• Biomolecules & Therapeutics
• /
• v.18 no.4
• /
• pp.469-476
• /
• 2010

This study was to investigate the effect of apigenin on the bioavailability of paclitaxel after oral and intravenous administration in rats. The effect of apigenin on P-glycoprotein (P-gp), cytochrome P450 (CYP)3A4 activity was evaluated. The pharmacokinetic parameters of paclitaxel were determined in rats after oral (40 mg/kg) or intravenous (5 mg/kg) administration of paclitaxel with apigenin (0.4, 2 and 8 mg/kg) to rats. Apigenin inhibited CYP3A4 activity with 50% inhibition concentration ($IC_{50}$) of 1.8 ${\mu}M$. In addition, apigenin significantly inhibited P-gp activity. Compared to the control group, apigenin significantly increased the area under the plasma concentration-time curve (AUC, p<0.05 by 2 mg/kg, 59.0% higher; p<0.01 by 8 mg/kg, 87% higher) of oral paclitaxel. Apigenin also significantly (p<0.05 by 2 mg/kg, 37.2% higher; p<0.01 by 8 mg/kg, 59.3% higher) increased the peak plasma concentration ($C_{max}$) of oral paclitaxel. Apigenin significantly increased the terminal half-life ($t_{1/2}$, p<0.05 by 8 mg/kg, 34.5%) of oral paclitaxel. Consequently, the absolute bioavailability (A.B.) of paclitaxel was significantly (p<0.05 by 2 mg/kg, p<0.01 by 8 mg/kg) increased by apigenin compared to that in the control group, and the relative bioavailability (R.B.) of oral paclitaxel was increased by 1.14- to 1.87-fold. The pharmacokinetics of intravenous paclitaxel were not affected by the concurrent use of apigenin in contrast to the oral administration of paclitaxel. Accordingly, the enhanced oral bioavailability by apigenin may be mainly due to increased intestinal absorption caused via P-gp inhibition by apigenin rather than to reduced renal and hepatic elimination of paclitaxel. The increase in the oral bioavailability might be mainly attributed to enhanced absorption in the gastrointestinal tract via the inhibition of P-gp and reduced first-pass metabolism of paclitaxel via the inhibition of the CYP3A subfamily in the small intestine and/or in the liver by apigenin. It appears that the development of oral paclitaxel preparations as a combination therapy is possible, which will be more convenient than the i.v. dosage form.

• Natural Product Sciences
• /
• v.15 no.3
• /
• pp.144-150
• /
• 2009

Gradient centrifugal partition chromatography (GCPC) method was developed and applied to isolate 3,5-dimethoxyphenanthrene-2,7-diol (DMP) and batatasin-I (BA-I) from the dichloromethane soluble extract of Dioscorea opposita. In this method, the lower phase of n-hexane-methanol-water system (HMW, 10 : 9 : 1, v/v) was used as a mobile phase A (MpA) and water was used as a mobile phase B (MpB). This gradient CPC method is comparable to that of reversed-phase HPLC method in that the stationary upper-phase of HMW (10 : 9 : 1 v/v) works as if it were reversed-phase silica gel due to its hydrophobic property, while the lower phase (MpA) and water (MpB) functioned as hydrophilic mobile phases. The initial condition of the mobile phase was 20% MpA/80% MpB and maintained for 150 min to obtain DMP (1.2 mg), and then MpA was increased up to 50% to elute BA-I (1.7 mg). The purities of DMP and BA-I were 94.1% and 98.3% with the recovery yields of 83% and 86%, respectively. Similar results were obtained by linear-gradient CPC. The CPC peak fractions were identified by comparing their retention time to those of authentic samples of DMP and BA-I and their spectroscopic data ($^1$H NMR and $^{13}$C NMR) to those of literature values.

• Korean Journal of Food Science and Technology
• /
• v.41 no.5
• /
• pp.587-591
• /
• 2009

Volatiles in Artemisia princeps Pampan. cv. sajabal (sajabalssuk) and A. princeps Pampan. (ssuk) treated with different processing were analyzed using headspace-solid phase microextraction (HS-SPME)/gas chromatography- a mass selective detector (GC-MS). Sajabalssuk and ssuk were treated with steam distillation (SD) and freeze-dried/steam distillation (FD/SD) while controls were raw sajabalssuk and raw ssuk. Sajabalssuk had significantly more total volatiles than ssuk in control and FD/SD treated samples (p<0.05). Major volatiles in raw sajabalssuk were 2-hexenal, 1,8-cineol, trans-caryophyllene, and hexanal while those in raw ssuk were 1-hexanol, ${\beta}$-myrcene, limonene, and 2-hexenal, which implies that substantial lipid oxidation occurred in raw samples. Sajabalssuk with SD and FD/SD treatment had higher peak areas of 1,8-cineole, 4-terpineol, 1-octen-3-ol, and ${\alpha}$-terpineol while ssuk with SD and FD/SD treatment possessed 1,8-cineol, camphor, borneol, artemisia ketone, ${\alpha}$-thujone, and 1-octen-3-ol, which showed that steam distillation produced more volatiles from terpenoids than raw samples. Based on the results of HS-SPME/GC-MS, relative amounts of volatiles from lipid oxidation including 2-hexenal, hexanal, and 1-hexanol were reduced in sajabalssuk and ssuk with freeze-drying and/or steam distillation treatment.

• Applied Biological Chemistry
• /
• v.49 no.1
• /
• pp.49-54
• /
• 2006

Physicochemical properties of cross-linked rice starches were investigated. Swelling power of cross-linked rice starch increased at relatively lower temperature $(60^{\circ}C)$ than native rice starch $(70^{\circ}C)$. Cross-linked rice starch showed lower solubility $(1.7{\sim}6.1%)$ than native rice starch $(2.2{\sim}13.8%)$ and solubility is not significantly different with the amount of phosphorus oxychloride. Pasting temperature $(69.2{\sim}70.6^{\circ}C)$ and peak viscosity $(2,874{\sim}3,175\;cp)$ of cross-linked rice starch were lower than native starch $(71.6^{\circ}C,\;3,976\;cp)$, but holding strength $(2,177{\sim}2,708\;cp)$ and final viscosity $(3,424{\sim}3,826 \;cp)$ of cross-linked rice starch were higher than native starch (1,000 cp, 2,312 cp). DSC thermal transitions of cross-linked rice starches were shifted to a lower temperature than native rice starch but there was no significant difference in gelatinization enthalpy between native and cross-linked rice starches. X-ray diffraction pattern of both native and cross-linked rice starches showed typical A-type crystal indicating that cross-linking had not affected the crystalline region of starch.