• Journal of applied mathematics & informatics
• /
• 제18권1_2호
• /
• pp.573-583
• /
• 2005

In this paper, all near-rings R are left near-rings and all representations of R are (right) R-groups. We start with a study of AR, almost AR and AGR rings which are motivated by the works on the Sullivan's Problem [10] and its properties. Next, for any R-group G, we introduce a notion of R-groups with M R-property and investigate their properties and some characterizations of these R-groups. Finally, for the faithful M R-property, we get a commutativity of near-rings and rings.

• 대한수학회지
• /
• 제42권6호
• /
• pp.1153-1167
• /
• 2005

In this paper, all rings and all near-rings R are associative, all modules are right R-modules. For a near-ring R, we consider representations of R as R-groups. We start with a study of AGR rings and their properties. Next, for any right R-module M, we define a new concept GM module and investigate the commutative property of faithful GM modules and some characterizations of GM modules. Similarly, for any near-ring R, we introduce an R-group with MR-property and some properties of MR groups.

• 호남수학학술지
• /
• 제31권4호
• /
• pp.515-527
• /
• 2009

Let R be a commutative ring with identity. Then we prove $M_n(R)=GL_n(R)$ ${\cup}${$A{\in}M_n(R)\;{\mid}\;detA{\neq}0$ and det $A{\neq}U(R)$}${\cup}Z(M-n(R))$ where U(R) denotes the set of all units of R. In particular, it will be proved that the full matrix ring $M_n(F)$ over a field F is the disjoint union of the general linear group $GL_n(F)$ of degree n over the field F and the set $Z(M_n(F))$ of all zero-divisors of $M_n(F)$. Using the result and universal mapping property we prove that $M_n(F)$ is its total ring of fractions.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.92-97
• /
• 2012

Using the pulsed current activated sintering method, the WC-10wt.% Co materials were densified using a WC and Co powder. The WC-Co almost completely dense with a relative density of up to 99.5 % after the simultaneous application of a pressure of 60 MPa and an electric current for 3 minutes almost without any significant change in the grain size. The average grain size of about $0.3{\mu}m$. The hardness and fracture toughness at $1000^{\circ}C$ were about $2200kg/mm^2$ and $9.8MPa.m^{1/2}$, respectively.

• Neonatal Medicine
• /
• 제16권2호
• /
• pp.221-233
• /
• 2009

목 적 : 신장에서 분비되어 적혈구를 생산하는 빈혈제로 알려진 에리스로포이에틴(Erythropoietin, EPO)은 단순히 피를 만드는 조혈기능 뿐 아니라 최근 신경계 보호 및 신경강화 효과가 있다고 발표되고 있지만 주산기 가사로 인한 저산소성 허혈성 뇌병증의 치료제로서 그 기전이 명확하게 밝혀지지 않았다. 저자들은 유전자 재조합 인 에리스로포이에틴(recombinant Human EPO, rHuEPO)을 이용하여 주산기 저산소성 허혈성 뇌병증의 치료제로서 N-methyl-D-aspartate (NMDA) 수용체와 관련된 흥분성 독성작용을 통한 조절 등 그 기전을 알아보고자 하였다. 방 법 : 재태기간 19일된 태아 백서의 대뇌피질 세포를 배양하여 정상산소군은 5% $CO_2$ 배양기(95% air, 5% $CO_2$)에 두었고, 저산소군과 농도별 뇌손상 전 rHuEPO 투여군(1, 10, 100 IU/mL)은 1% $O_2$ 배양기(94% $N_2$, 5% $CO_2$)에서 6시간 동안 뇌세포손상을 유도하였다. 세포성장과 생존력을 평가하기 위해 MTT 실험을 시행하였다. 동물 모델에서는 생후 7일된 신생백서의 좌측 총 경동맥을 결찰한 후 6개 군; 정상산소군, sham-operated군, 저산소-허헐성군, 저산소-허헐성+vehicle군, 저산소-허헐성 손상 전 rHuEPO 투여군, 저산소-허헐성 손상 후 rHuEPO 투여군으로 나누었고, 저산소-허헐성 손상은 특별히 제작한 통속에서 2시간 동안 8% $O_2$ (8% $O_2$, 92% $N_2$)에 노출시켰다. rHuEPO은 뇌손상 전후 30분에 체중 kg당 1000 IU를 투여하였고, 저산소-허헐성 손상 후 7일째 조직을 실험하였다. 적출한 조직으로 H&E 염색을 하여 뇌손상을 형태학적으로 관찰하였다. 세포배양 및 동물실험에서 NMDA 수용체의 아단위인 NR1, NR2A, NR2B, NR2C, NR2D를 이용하여 실시간 중합효소연쇄반응을 실시하였다. 결 과 : 저산소군에서 세포 생존률은 정상산소군보다 60% 감소하였으며, rHuEPO 투여군(1, 10 IU/mL)은 80% 증가하였다. rHuEPO 투여군(100 IU/mL)은 회복되지 않았다. 우측 반구 대비 좌측 반구의 범위는 정상산소군 98.9%, sham-operated군 99.1%, 저산소-허헐성군 57.1%, 저산소-허헐성+vehicle군 57.0%, 저산소-허헐성 손상 전 rHuEPO 투여군 87.6%, 저산소-허헐성 손상 후 rHuEPO 투여군 91.6%으로 나타났다. NMDA 수용체의 아단위 생체외 실험에서 실시간 중합효소연쇄반응의 결과 NMDA 수용체 아단위 mRNA의 발현은 rHuEPO 투여군에서 저산소군보다 모두 증가하였다. 결 론 : 본 연구에서 rHuEPO은 흥분성 독성작용과 관련되어 NMDA 수용체를 조절하면서 저산소성 허헐성 뇌손상을 보호하는 것을 알 수 있었다.

• 한국재료학회지
• /
• 제31권7호
• /
• pp.397-402
• /
• 2021

In this study, binderless-WC, WC-6 wt%Co, WC-6wt% 1 and 2.5 B₄C materials are fabricated by spark plasma sintering process (SPS process). Each fabricated WC material is almost completely dense, with a relative density up to 99.5 % after the simultaneous application of pressure of 60 MPa. The WC added Co and Co-B₄C materials resulted in crystalline growth. The WC with HCP crystal structure has respective interfacial energy (basal facet direction: 1.07 ~ 1.34 J·m^-2, prismatic direction: 1.43 ~ 3.02 J·m^-2) that depends on the grain growth direction. It is confirmed that the continuous grain growth, biased by the basal facet, which has relatively low energy, is promoted at the WC/Co interface. As abnormal grain growth takes place, the grain size increases more than twice from 0.37 to 0.8 um. It is found through analysis that the hardness property also greatly decreases from about 2661.4 to 1721.4 kg/mm², along with the grain growth.

• 한국재료학회지
• /
• 제32권1호
• /
• pp.44-50
• /
• 2022

Transition metal carbides (TMCs) are used to process difficult-to-cut materials due to the trend of requiring superior wear and corrosion properties compared to those of cemented carbides used in the cutting industry. In this study, TMC (TiC, TaC, Mo₂C, and NbC)-based cermets were consolidated by spark plasma sintering at 1,300 ℃ (60 ℃min) with a pressure of 60 MPa with Co addition. The sintering behavior of TMCs depended exponentially on the function of the sintering exponent. The Mo₂C-6Co cermet was fully densified, with a relative density of 100.0 %. The Co-binder penetrated the hard phase (carbides) by dissolving and re-precipitating, which completely densified the material. The mechanical properties of the TMCs were determined according to their grain size and elastic modulus: TiC-6Co showed the highest hardness of 1,872.9 MPa, while NbC-6Co showed the highest fracture toughness of 10.6 MPa^*m^1/2. The strengthened grain boundaries due to high interfacial energy could cause a high elastic modules; therefore, TiC-6Co showed a value of 452 ± 12 GPa.

• Journal of Microbiology and Biotechnology
• /
• 제4권2호
• /
• pp.113-118
• /
• 1994

A bacterial strain NS-83 isolated from soil was able to produce an extracellular thermostable protease. The strain was identified as Pseudomonas aeruginosa based on its morphological and physiological characteristics. A thermostable protease from this strain has been purified to homogeneity as judged by SDS-PAGE and isoelectric focusing. The purification procedures included hydrophobic interaction, ion exchange, and gel filtration chromatography. The $M_r$ and the pl of the enzyme were 32,000 and 5.9, respectively. The optimal pH at 55$^{\circ}C$ and the optimal temperature at pH 7.0 were 8.0 and 60$^{\circ}C$, respectively. The D-values of the enzyme at 60, 65, and 70$^{\circ}C$ were 22, 2.1, and 0.75 hrs, respectively. The enzyme activity was significantly inhibited in the presence of 1 mM o-phenanthroline or EDTA, suggesting that the enzyme is metalloprotease. The $K_m$, and $V_{max}$ for Hammarsten casein were found to be 3.2 mg/ml and 0.918 unit/ml, respectively. These enzymatic properties were similar to those of elastase produced from P. aeruginosa IFO 3455, but the enzyme was clearly different from the reported elastase, in respect to $Ca^{++}$ effects on enzyme-thermostability. This property, together with amino acid composition analysis, confirmed that the enzyme differs from the known P. aeruginosa elastase.

• 한국재료학회지
• /
• 제31권8호
• /
• pp.471-479
• /
• 2021

The electrochemical reaction between lead borate glass frit doped with Sn metal filler and Ni-Cr wire of a J-type resistor during a term of Joule heating is investigated. The fusing behavior in which the Ni-Cr wire is melted is not observed for the control group but measured for the Sn-doped specimen under 30 V and 500 mA. The Sn-doped lead borate glass frit shows a fusing property compared with other metal-doped specimens. Meanwhile, the redox reaction significantly contributes to the fusing behavior due to the release of free electrons of the metal toward the glass. The electrons derived from the glass, which used Joule heat to reach the melting point of Ni-Cr wire, increase with increasing corrosion rate at interface of metal/glass. Finally, the confidence interval is 95 ± 1.95₉ %, and the adjusted regression coefficient, R in the optimal linear graph, is 0.93, reflecting 93% of the data and providing great potential for fusible resistor applications.

• 폴리머
• /
• 제35권3호
• /
• pp.216-222
• /
• 2011

4급 아민에 의한 이온성 및 3급 아민에 의한 비공유전자쌍의 이중 특성을 갖은 다중벽 탄소나노튜브 지지체를 글리시딜 메티크릴레이트의 방사선 그래프트법을 수행한 후, 아민화 반응을 수행하여 제조하였다. 제조된 이중 다중벽 틴소나노튜브 지지체와 나피온 용액을 혼합 후, 이 코팅용액을 GC 전극 표면에 코팅시킨 후, 여기에 미생물인 Alkaligenes spp.를 고정화하여 미생물 바이오센서를 제작하였다. 이 미생물 센서의 페놀에 대한 검출범위는 0.005~7.0 mM이었다. 이 미생물 바이이오센서를 이용하여 상용의 적포도주에서 페놀함량을 측정하였다.