• Journal of Life Science
• /
• v.27 no.4
• /
• pp.383-389
• /
• 2017

This study intends to analyze the contents of rutin, procyanidin B3, quercetin, kaempferol, known to have antioxidant, anti-inflammatory and anti-carcinogenic effects, among the polyphenol type contained in the grape pruning stem extracts (GPSE), utilizing grape stems being discarded after harvest, measure the effects on the skin moisture, inhibition of skin cell proliferation, anti-inflammatory on the damaged skin of a HR-1 mice induced with UVB, and verify the applicability as a material for functional food and functional cosmetics. The results of verifying the photoprotection effects through the skin proliferation control through of GPSE showed similar result to suncream was achieved at the GPSE concentration of 2,000 mg/kg on the epidermis (p<0.05). The results showed anti-inflammatory effects on all groups applied with GPSE as compared to the control group irradiated with UVB, but at the GPSE concentration of 1,000 mg/kg, a lower COX-2 protein expression at 8%, lower than the 22% of suncream, was observed to achieve an excellent anti-inflammatory effect (p<0.05). The results of this study confirmed the existence of active polyphenol type, such as rutin, kaempferol, querocetin and procyanidin B3, within the GPSE, and GPSE has improvement effects on moisturizing effects, skin proliferation control effect, inflammatory control effect and improvement effects on the skin barrier function through UV ray damage. GPSE is a functional ingredient with a potential for skin protection effects, and has high utilization as an ingredient for functional food and functional cosmetics.

• Journal of Korean Society of Forest Science
• /
• v.36 no.1
• /
• pp.26-32
• /
• 1977

Press drying was used on sapwood and heartwood of oak (Qercus acutissima Carruthers) to find profitable means of drying low grade logs. This study was designed to investigate the process of press drying considering core temperature, current moisture content, drying rate, drying time, final moisture content, dimensional change and drying defects. The drying tests were conducted using 1.5 centimeter thick material at platen temperature of $175^{\circ}C$ and pressure of 35psi. The results were summarized as fallows. 1. Core temperature was divided into three stages of drying characterized by initial heating period, plateau temperature, and period of rising core temperature. Plateau temperature of heartwood material was higher and longer than that of sapwood material. 2. The predicting equation for change in drying rate of sapwood material was log y=-2.7925-0.0811x as function of time. That of heartwood material was log y=-3.3382-0.0468x. 3. Sapwood material reduced the moisture content from 59 to 2.5 percent in 45minutes. Heartwood material reduced the moisture content from 64 to 3.3 percent in 55 minutes. 4. Shrinkage during press drying were 20.4 percent in thickness direction and 2.5 percent in width direction. Recovery on equilibrium conditioning at 65 percent relative humidity and temperature of $20^{\circ}C$. were 11.4 percent in thickness direction and 49.4 percent in width direction. 5. Heartwood material developed severe honeycombing and moderate checking. The sapwood material dried without honeycombing, checking and collapse. All material kept wood flat.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.6
• /
• pp.976-986
• /
• 1996

BACKGROUND : Dyspnea is common among patients with cardiopulmonary disease, and "daily disability" is defined as a functional impairment resulting from exercise intolerance. The maximal oxygen uptake(VO2max) during exhausting work is not only the best single physical indicator of the capacity of a man for sustaining hard muscular work, but also the most objective method by which one can determine the physical fitness of an individual as reflected by his cardiovascular system. However, the expense, time and personnel requirements make this procedure prohibitive for testing large group. The walking test is well-known type of exercise and it cost nothing to perform and have good reproducibility. Thus we performed the walking test and investigated correlations with spirometry, ABG and exercise test. METHOD: We observed the walking test and exercise test by cycle ergometer in 37 patients who visited our hospital because of dyspnea. Arterial blood gas analysis and spiromety, dyspnea index were performed, too. RESULT : (1) The VO2max was significantly lower in patients with COPD and cardiovascular disease than asthma and dyspnea on exertion group(p<0.05). The walking test distance was also lower in former. (2) The 12 minute walking test was significantly correlated with VO2max, PaCO2, FVC(%), FEV1(%) in all patients(p<0.05), and the walking test was only conelated with VO2max in patients with COPD(p<0.05). (3) In COPD patients, the VO2max was best correlated with FEV1(%) and FVC(%) and significantly correlated with walking test. But there was no correlation between walking test and FEV1(%) & FVC(%). (4) The 6 minute walking test was well correlated with 12 minute walking test(r=0.92. p<0.01). CONCLUSION : The walking test is the simple method for assessing exercise performance in patient with cardiopulmonary disease and a reliable indicator for VO2max. And the walking test is practical method for assessing on everyday disability rather than maximal exercise capacity. The 6 minute walking test is highly correlated with 12 minute walking test and a less exhausting for the patients and a time-saving for the investigator.

• Journal of Yeungnam Medical Science
• /
• v.2 no.1
• /
• pp.95-102
• /
• 1985

This report offers descriptive data about the drugs utilized in out patient department (OPD) of Yeungnam University Hospital (YUH) in the period of march to august in 1985. The data in this report were produced by the computerized totalization of the number of mentions of individual drugs included in the prescriptions. The 100 drug entries that were most frequently recorded are listed in rank order. The listing is arbiturarily restricted to the drugs that were prescribed as single preparations, the drugs of basis of compound preparations and the drugs of adjuvent or corrective of compound preparations that have significant therapeutic effects either by generic names. And in addition, the listing also involves the compound preparations used in relatively large frequency, and the individual components of which have the unique pharmacological actions each other by proprietary names. And all routes of administrations were allowed. The 10 drugs most frequently named are diazepam, aluminum compounds, acetaminophen, isoniazid, metoclopramide, $polaramine^{(R)}$, carboxymethylcystem, ephedrine, codeine and caroverine in order. The 521,855 drug mentions listed as above are described by the chief therapeutic usage that each is intended to apply generally. The drugs which account the largest proportion of total mentions were those acting on the central nervous system (20.57%), including tranquilhzers and sedative hypnotics (11.71%), analgesic antipyretics (5.55%), antidepressants (2.15%) etc. Gastrointestinal drugs and smooth muscle preparations (18.64%) included antacids and anti-ulcer drugs (9.24%), antiemetics (3.57%), spasmolytics (3.14%) and others. Respiratory drugs (16.11%) included expectorants and cough preparations (10.99%) and bronchodilators (5.12%). Chemotherapeutic agents (15.12%) included the antiTbc drugs (7.09%) most frequently, and the penicillins (3.33%) accounted the largest proportion among the antibiotics. Cardiovascular drugs (5.64%) included cardiac drugs and coronary vasodilator (4.12%) and antihypertensives and vasodilators (1.06%). And anti-inflammatory drugs (4.33%), vitamins of single preparations (3.76%), hormones and their antagonists (3.29%), common cold preparations (3.12%), diuretics (2.81%), drugs supporting liver function (2.02%), drugs affecting autonomic nervous system(1.89%) including anti-glaucomas, atropine and cerebral vasodilators, antihistamine drugs (1.02%) and disinfectants (0.74%) were following in order. The data in this report were compared to those reported by H. Koch, et al. in United States (US), 1981 as "Drugs Most Frequently Used in Office Practice:National Ambulatory Medical Case Survey, 1981." Cardiovascular drugs prescribed in YUH were much less in proportion than in US (10.56%), but gastrointestinal drugs accounted the larger proportion than in US (3.72%). Expectorants and cough preparations in YUH also accounted the larger proportion than in US (2.74%). In conclusion, in the period of march to august, 1985, OPD of YUH prescribed the CNS drugs including diazepam most frequently, and gastrointestinal, repiratory and chemotherapeutic drugs in next orders. It is supposed that the eating habits of Koreans and a unique atmospheric condition in Taegu as a basin were some important factors that affected the proportions of drugs acting on gastrointestinal and respiratory tracts.

• Archives of Pharmacal Research
• /
• v.27 no.10
• /
• pp.1065-1072
• /
• 2004

Depression is associated with a dysfunctional serotonin (5-hydroxytryptamine; 5-HT) system. More recently, several lines of evidence suggest that an important factor in the development of depression may be a deficit in the function and expression of $5-HT_{1A}$ receptors. The present study assessed if Nelumbinis Semen (N. s.) had an anti-depression effect through reversing a decrease in $5-HT_{1A}$receptor binding in rats with depression-like symptoms induced by chronic mild stress. Using a $5-HT_{1A}$ receptor binding assay, with a specific $5-HT_{1A}$receptor agonist, 8- OH-DPAT (8-hydroxy-2-(di-n-propylamino) tetralin), the mechanism of the anti-depression effect of N. s. on rats was investigated, and the effects compared with two well-known antidepressants, Hyperium Perforatum (St. Johns Wort) and fluoxetine (Prozac). Animals were divided into five groups: the normal (N) group without chronic mild stress (CMS), the control (C) group under CMS for 8 weeks, the Nelumbinis Semen (N. s.) treatment group under CMS for 8 weeks, the Hyperium Perforatum (H. p.) treatment group under CMS for 8 weeks and finally, the fluoxetine (F) treatment group under CMS for 8 weeks. Each treatment was administered to rats during the last 4 weeks of the 8-week CMS. A sucrose intake test was performed to test the anti-depression effect of N. s. The N. s. treatment significantly reversed the decreased sucrose intake under CMS (P<0.05 compared to control group under CMS). In the CA2 and CA3 regions of the hippocampus, both N. s. and H. p. reversed the CMS-induced decrease in $5-HT_{1A}$receptor binding. In the I to II regions of the frontal cortex, N. s. and H. p. also reversed the CMS-induced decrease in$5-HT_{1A}$receptor binding, and even showed a significant increase in $5-HT_{1A}$receptor binding compared to the F treatment group (N. s. vs. P, p<0.05, H. p. vs. P, p<0.05). However, in the hypothalamus, all treatments reversed the CMSinduced decrease in $5-HT_{1A}$receptor binding. This reversal effect of N. s. on the decrease in $5-HT_{1A}$receptor binding in the frontal cortex, hippocampus and hypothalamus of rat brains was very similar to that of H. p, but different from that of F. It is concluded that N. s. presents an anti-depression effect through enhancing $5-HT_{1A}$receptor binding.

• Korean journal of applied entomology
• /
• v.51 no.4
• /
• pp.431-438
• /
• 2012

The developmental time of the nymphs of Myzus persicae was studied in the laboratory (six constant temperatures from 15 to $30^{\circ}C$ with 50~60% RH, and a photoperiod of 14L:10D) and in a green-pepper plastic house. Mortality of M. persicae in laboratory was high in the first(6.7~13.3%) and second instar nymphs(6.7%) at low temperatures and high in the third (17.8%) and fourth instar nymphs(17.8%) at high temperatures. Mortality was 66.7% at $33^{\circ}C$ in laboratory and $26.7^{\circ}C$ in plastic house. The total developmental time was the longest at $14.6^{\circ}C$ (14.4 days) and shortest at $26.7^{\circ}C$ (6.0 days) in plastic house. The lower threshold temperature of the total nymphal stage was $3.0^{\circ}C$ in laboratory. The thermal constant required for nymphal stage was 111.1DD. The relationship between developmental rate and temperature was fitted nonlinear model by Logan-6 which has the lowest value on Akaike information criterion (AIC) and Bayesian information criterion (BIC). The distribution of completion of each developmental stage was well described by the 3-parameter Weibull function ($r^2=0.95{\sim}0.97$). This model accurately described the predicted and observed occurrences. Thus the model is considered to be good for use in predicting the optimal spray time for Myzus persicae.

• Korean journal of applied entomology
• /
• v.51 no.4
• /
• pp.421-429
• /
• 2012

The developmental time period of Aphis gossypii was studied in laboratory (six constant temperatures from 15 to $30^{\circ}C$ with 50~60% RH, and a photoperiod of 14L:10D) and in a cucumber plastic house. The mortality of A. gossypii in the laboratory was high in the 2nd (20.0%) and 3rd stage(13.3%) at low temperature but high in the 3rd (26.7%) and 4th stage (33.3%) at high temperatures. Mortality in the plastic house was high in the 1st and 2nd stage but there was no mortality in the 4th stage at low temperature. The total developmental period was longest at $15^{\circ}C$ (12.2 days) in the laboratory and shortest at $28.5^{\circ}C$ (4.09 days) in the plastic house. The lower threshold temperature at the total nymphal stage was $6.8^{\circ}C$ in laboratory. The thermal constant required to reach the total nymphal stage was 111.1DD. The relationship between the developmental rate and temperature fit the nonlinear model of Logan-6 which has the lowest value for the Akaike information criterion(AIC) and Bayesian information criterion(BIC). The distribution of completion of each development stage was well described by the 3-parameter Weibull function ($r^2=0.89{\sim}0.96$). This model accurately described the predicted and observed outcomes. Thus it is considered that the model can be used for predicting the optimal spray time for Aphis gossypii.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.1
• /
• pp.1-7
• /
• 2010

This study was carried out to investigate plow pan characteristics and to grasp the relationship between its particle size distribution fractal dimension ($D_m$) and water transport in paddy plow pan. Twenty four soil sampling sites with different management groups, ordinary and sandy-textured, were selected and investigated for physical properties of soils such as Yamanaka hardness in April, non-submerged condition, before rice seedling transplanting. The plow pan appearing depth and thickness was determined by penetration resistance profile. Undisturbed core samples with five replicates were sampled at plow pan layerwith 2 inch cores for measuring soil bulk density and saturated hydraulic conductivity. The particle size distribution fractal dimension ($D_m$) was calculated by the method following the procedure Tylerand Wheacraft (1992), using the USDA-based particle size analysis datawith fractions of 0-0.002, 0.002-0.053, 0.053-0.1, 0.1-0.25, 0.25-0.5, 0.5-1.0, and 1.0-2.0 mm. The plow pan of investigated fields appeared at a range from 5 to 30 cm depth, showing minimum value in sandy-textured management group and maximum value in ordinary management group. The thickness of plow pan were distributed from 5 to 17 cm, showing both minimum and maximum values in sandy-textured management group. Averagely, the plow appearing depth were deeper in ordinary management group than in sandy-textured management group, whereas the reverse in the thickness of plow pan. The particle size distribution fractal dimension ($D_m$) had higher value with finer textures, with higher fractality in coarser texture. Saturated hydraulic conductivities, $K_s$, of plow pan soils distributed from 0.5 to 1420 mm $day^{-1}$, having the highest value in sandy skeletal soils. The $K_s$ decreased with decreasing clay content and $D_m$, showing power function relationships. The coefficient of determination, $R^2$, of the fitted power functions were higher in $D_m$ as x-axis than in clay content. This means that $D_m$ could give us more effective estimation than clay content. Especially, sandy-textured paddy soils had higher $R^2$, compared to ordinary paddy soils. $K_s$ of relatively coarse-textured soils with less than 18%of clay content, therefore, was more dependent on particle size distribution than that of relatively fine-textured soils. From these results, it could be concluded that the fractal scaling gives us a unique quantity describing particle size distribution and then can be applied to estimate saturated hydraulic conductivity, especially more effective in coarse-textured soils.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.4
• /
• pp.371-383
• /
• 2012

Shaping the root canal system to maintain original canal curvature is essential to clinical success in endodontic treatment. Opposed to most root canals that are curved, endodontic instruments are made from straight metal blanks. They have a tendency of straightening the root canal during preparation and frequently result in procedural errors. A new treatment method to maintain original canal curvature during shaping has been introduced for preventing procedural errors. The aim of this study was to compare the ability of instruments to maintain original canal curvature of continuous rotary system and single file system. Thirty ISO 15, 0.02 taper, Endo Training Blocks(Dentsplay Maillefer) were used. Specimens were assigned to 1 of 3 groups for shaping: specimens in group 1 were shaped with ProFile #20/.06 at the WL. Specimens in group 2 were shaped with Mtwo #35/.04 at the WL. Specimens in group 3 were shaped with WaveOne Primary reciprocating files at the WL after the glide path was achieved with PathFile. Pre- and postinstrumentation digital images were superimposed and processed with Matlab r2010b(The MathWorks Inc, Natick, MA) software to analyze the curvature-radius ratio(CRr), representing canal curvature modification. Data for comparison on the ability of instruments to maintain original canal curvature depending on each Ni-Ti file were analyzed with 1-way ANOVA(P<.05). Data for comparison on the ability of instruments to maintain original canal curvature depending on each Ni-Ti file system were analyzed with independent t-test(P<.05). A statistically significant difference(P<0.05) was noted on each Ni-Ti file. ProFile and WaveOne instrumentations maintained the original canal curvature significantly better(P<0.05) than Mtwo file. There were no significant difference(P>0.05) between continuous rotary system and single file system. Under the conditions of this study, ProFile and WaveOne instruments maintained the original curvature significantly better than Mtwo file and were less modification of the canal curvature compared. There was no significant difference between continuous rotary system and single file system in shaping of simulated canals. As clinical practitioners, it may be advantages to use hybrid approach when root canal shapes depending on the design and usage of Ni-Ti files.

• Korean Journal of Materials Research
• /
• v.5 no.6
• /
• pp.690-698
• /
• 1995

The Poly-S $i_{1-x}$G $e_{x}$ thin films were deposited on oxidized Si wafer by RTCVD(rapid thermal chemical vapor deposition) using Si $H_4$and Ge $H_4$, at 450 ~5$50^{\circ}C$. The variation of Ge mole fraction and the deposition rate of S $i_{1-x}$G $e_{x}$ thin film were studied as a function of the deposition temperature and the Ge $H_4$/Si $H_4$input ratio, and the crystal phase and the surface roughness were studied by XRD and AFM(atomic force microscopy), respectively. The experimental results showed that the activation energy for the deposition of poly-S $i_{1-x}$G $e_{x}$ was about 32~37Kca /mol and the deposition rate of S $i_{1-x}$G $e_{x}$ thin films was increased with increasing the deposition temperature and the input ratio. From the analysis of composition, it was known that the Ge mole fraction within the poly-S $i_{1-x}$G $e_{x}$ thin film was decreased with decreasing the input ratio and increasing the deposition temperature. As-deposited S $i_{1-x}$G $e_{x}$ thin films were polycrystalline over the entire experimental range. But those were amorphous at the deposition temperature of 450, 475$^{\circ}C$ and the input ratio of 0.05. By adding the Ge $H_4$, poly-S $i_{1-x}$G $e_{x}$ thin film were deposited at relatively lower deposition temperatures($\leq$ 5$50^{\circ}C$) than those of conventional poly-Si(>$600^{\circ}C$). From surface roughness measurement of poly-S $i_{1-x}$G $e_{x}$ it was found that the surface roughness( $R_{i}$ ) increased with increasing the deposition temperature and input ratio.and input ratio.