• 한국농공학회논문집
• /
• 제62권4호
• /
• pp.45-51
• /
• 2020

The poisson's ratio was obtained from the effective vertical stress and horizontal stress of consolidation-undrained test. It was analyzed void ratio verse poisson's ratio. At the result, the effective friction angle was increase with relative density increased, was decreased the poisson's ratio. The empirical equation of void ratio and poisson's ratio was showed very high correlation r²=0.846. The empirical equation was showed that the smaller the void ratio in the fine grained soil than granular soil. In the case of 0.85 times the correlation analysis equation of granular and fine grained soil, the experimental results were shown very similarly. In especially, the poisson's ratio prediction results was shown within 5% of the error range, was revalidation 0.85 times the correlation analysis equation using the void ratio. In this study, correlation analysis equation of the granular and fine grained soil was more reliability of the poisson's ratio prediction results apply to the void ratio than dry unit weight.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1996년도 추계 학술대회지
• /
• pp.104-105
• /
• 1996

• 대한지역사회영양학회지
• /
• 제16권4호
• /
• pp.454-465
• /
• 2011

This study was carried out to investigate distribution of obesity, body composition, weight control and dietary behaviors, and to analyze the relationship between Body Mass Index (BMI) and physical characteristics, body composition and dietary behaviors by anthropmetric measurement and questionnaires. The 199 study subjects were divided into 3 age groups; 30's (78), 40's (77) and 50's (44) and 4 groups by BMI ; under weight (4.5%), normal (51.3%), over weight (26.1%) and obese (18.1%). Amount of skeletal muscle, body water, mineral and body fat were significantly increased with BMI. There were especially significant increase skeletal muscle 5.3 kg ($19.1\;{\rightarrow}\;23.5\;kg$), body water 5.3 kg ($26.3\;{\rightarrow}\;31.6\;kg$) and fat 15.2 kg ($11.2\;{\rightarrow}\;26.4\;kg$) from under weight to obesity group, respectively (p < 0.01). There were significantly decreased in the ratio of body water (10.3%), protein (2.7%) and body mineral (1.1%) from under weight to obesity, but significant increase 14.1% in body fat (p < 0.001). About 44.4% of under weight group and 40.1% of normal group and 50% of over and obesity group had dissatisfaction on their body images. Most of the women were concerned about their body images and experienced weight control. Dietary behavior scores of obesity group were significant lower than the other four groups (p < 0.001). There were significant positive correlation between BMI and body water (r = 0.62), protein (r = 0.52), skeletal muscle (r = 0.63), body fat (r = 0.91) and WH ratio (r = 0.91), respectively (p < 0.001). The correlation between BMI and body fat and WH ratio were much higher than the correlation between weight and fat and WH ratio.

• 설비공학논문집
• /
• 제4권1호
• /
• pp.33-47
• /
• 1992

Experimental investigation on the performance of a heat pump system using refrigerant mixtures is done. The condenser and the evaporator are double pipe heat exchangers of counter flow type and the compressor is driven by a variable speed motor. The refrigerant mixture used in the experiment is R22/R142b. Experiments are performed by changing the compressor speed, composition on ratio of mixture, and the average temperatures of condenser and evaporator. The compressor work, heating capacity and the coefficient of performance are calculated. Results show that the heating capacity can be changed by varying the mass flow rate of refrigerant mixtures to meet the heating load. It is shown that the capacity control by changing the composition ratio is more effective than by changing the compressor speed. Under the condition where the external conditions are fixed and the heating loads are equal, the coefficient of performance has its maximum value near 50 : 50 mass fraction of the refrigerant mixture in this study.

• Restorative Dentistry and Endodontics
• /
• 제31권1호
• /
• pp.11-19
• /
• 2006

이 연구의 목적은 $ProTaper\^{(R)}$ S1과 3가지 종류의 파일을 각각 같이 사용하는 혼합법의 근관성형 효율을 비교해 보는 것이다. 5년 이상의 임상경력을 가진 치과의사 20명이 Ni-Ti파일 경험자군과 비경험자군으로 나뉘어, $ProTaper\^{(R)}$만을 사용한 C군과 $ProTaper\^{(R)}$ S1과 함께 세 종류의 파일 시스템- $ProFile\^{(R)}$ (P군), $HeroShaper\^{(R)}$ (H군), $K-Flexofile\^{(R)}$ (S군)을 혼합 적용하여, 각각의 방법으로 레진 근관을 성형하였다. 성형 전후 이미지를 중첩 시켜 근관형태 이상을 조사하고, 근단공부터 1, 2, 3mm 위치에서 근관 폭경의 변화량, 중심 변위율을 산출, 비교하여 다음의 결과를 얻었다. C군과 S군 모두 다른 실험군에 비해 성형시간이 많이 소요되었다. 경험자군에 비해 비경험자군에서는 C군과 H군에서 더 많은 시간이 소요되었다 P군의 중심변위율은 $ProTaper\^{(R)}$만을 사용한 C군이나 SS파일을 사용한 S군보다 양호하였다. 마찬가지로, 경험자군의 경우에서는 P군에 추가하여 H군도 더 나은 결과를 보였다 (p<0.05). 이 실험 조건하에, $ProFile\^{(R)}$과 $HeroShaper\^{(R)}$를 사용한 혼합법이 $ProTaper\^{(R)}$만을 사용한 성형방법보다 더욱 추천된다.

• 한국자동차공학회논문집
• /
• 제5권5호
• /
• pp.157-169
• /
• 1997

The effects of intake port eccentricity on the characteristics of in-cylinder swirl ratio in a 4-valve diesel engine having the two intake ports; one is a helical intake port and the other is a tangential intake port were investigated by using the ISM(impulse swirl meter) in steady flow test rig. Swirl ratio($R_s$) and mean flow coefficient($C_{f(mean)}$) with valve eccentricity ratio($N_y$) and axial distance(Z/B) were measured. As the results from this experiment, the characteristics of in-cylinder swirl ratio formed by a 4-valve cylinder head were largely affected by intake port eccentricity. There is a difference in the mass flowrate through the two intake ports, and the mass flowrate through the tangential intake port is 19% more than that of the helical intake port. Therefore, we could know that the effects of the mass flowrate ratio through each intake port besides intake port shape should be conidered.

• Corrosion Science and Technology
• /
• 제9권1호
• /
• pp.39-47
• /
• 2010

Galvanic coupling between GECM(graphite epoxy composite material) and metallic materials can facilitate corrosion of metals and alloys because GECM is noble and electrically conductive. Galvanic corrosion is affected by many factors including metallic materials, area ratio, surface condition, and corrosivity. This work aims to evaluate the effect of area ratio on galvanic corrosion between GECM and several metals. In the case of glavanic coupling of carbon steel and Al to GECM, corrosion rate increased with increasing area ratio. Corrosion rate of sensitized STS 316S stainless steel decreased a little at an area ratio 1:1 but increased at an area ratio 30:1. It is considered to be due to that area ratio affects galvanic corrosion more in less corrosion resistant alloys. However, in case of STS 316 and Ti, galvanic coupling reduces corrosion rate by the formation of passive film.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.83-88
• /
• 1997

In this paper, we described the basic elements (relative flowing area ratio and funeling velocity ratio in mortar, flowability and self-compactibility in concrete, and etc.) required for the maximum mix design of the super flowing concrete (SFC) using manufactured sand. Also, manufactured sand and fly ash were used for investigating characteristics of SFC through various experiments (replacement ratio of manufactured sand, optimum mix condition) before producing the concrete in batch plant. As the result of this project, the SFC using manufactured sand up to 50% showed high flowability and self-compactibility in fresh concrete. Furthermore, its compressive strength is higher than normal concrete without manufactured sand. From now on, this study may suggest how to apply manufactured sand in the SFC.

• Structural Engineering and Mechanics
• /
• 제39권5호
• /
• pp.683-701
• /
• 2011

In this study, inelastic displacement ratios and ductility demands are investigated for SDOF systems with period range of 0.1-3.0 s. with elastoplastic behavior considering soil structure interaction. Earthquake motions recorded on different site conditions such as rock, stiff soil, soft soil and very soft soil are used in analyses. Soil structure interacting systems are modeled with effective period, effective damping and effective ductility values differing from fixed-base case. For inelastic time history analyses, Newmark method for step by step time integration was adapted in an in-house computer program. Results are compared with those calculated for fixed-base case. A new equation is proposed for inelastic displacement ratio of interacting system ($\tilde{C}_R$) as a function of structural period of interacting system ($\tilde{T}$), strength reduction factor (R) and period lengthening ratio ($\tilde{T}/T$). The proposed equation for $\tilde{C}_R$ which takes the soil-structure interaction into account should be useful in estimating the inelastic deformation of existing structures with known lateral strength.

• 대한핵의학회지
• /
• 제19권1호
• /
• pp.127-136
• /
• 1985

To evaluate change of serum $beta_2-microglobulin$ concentration$(s\beta_2-MG)$ and the usefulness of $s\beta_2-MG$ and $s\beta_2-MG/serum$ creatinine concentration(sCr) ratio in various renal diseases, $s\beta_2-MG$ and sCr were measured in 25 normal controls and 90 patients of various renal diseases(16 cases of glomerulonephritis, 12 cases of acute renal failure, 8 cases of chronic renal failure, 24 cases of nephrotic syndrome, 15 cases of tubulointerstitial diseases and 15 cases of lupus nephritis) using $Phadebas^\circledR$ $Beta_2-Micro$ Test kits. The results were as follows; 1) In normal control, the mean value of $s\beta_2-MG$ was $1.65{\pm}0.41mg/l$ and the mean value of $s\beta_2-MG/sCr$ ratio was $0.14{\pm}0.05$. 2) In various renal diseases, the mean value of $s\beta_2-MG$ was $6.74{\pm}5.47mg/l$. The mean value of $s\beta_2-MG/sCr$ ratio was $0.24{\pm}0.11$ and significantly elevated than that of normal control. (p<0.05) 3) The correlation between $s\beta_2-MG$ and sCr in glomerular and tubulointerstitial disease was log $s\beta_2-MG-0.90$ log sCr-0.48 and its correlation coefficient was 0.78(p<0.05). 4) In glomerular disease, the correlation between $s\beta_2-MG$ and sCr was log $s\beta_2-MG-0.89$ log sCr-0.46(r - 0.76) and in tubulointerstitial disease, it was log, $s\beta2-MG-0.95$ log sCr-0.59 (r-0.87). There was no significant difference between the two groups(p<0.05). 5) Among 32 cases of glomerular and tubulointerstitial disease patients, whose sCr was within normal range, 17 cases showed elevated $s\beta_2-MG$. The mean values of $s\beta_2-MG/sCr$ ratio in these patients was $0.30{\pm}0.14$ and significantly elevated than that of normal control(p<0.05). 6) In 15 cases of lupus nephritis, 12 cases showed elevated $s\beta_2-MG$ with normal sCr and 12 cases showed elevated $s\beta_2-MG/sCr$ ratio. With above results, it was found that the $s\beta_2MG$ can be used as an index of glomerular filtration rate as in the case of sCr and that $s\beta_2-MG/sCr$ ratio can be used as a tool in early detection of slightly decreased glomerular filtration rate and in detection of the renal disease of increased $\beta_2-MG$ production.