• Journal of Korean Society of Forest Science
• /
• v.83 no.3
• /
• pp.410-423
• /
• 1994

Seasonal and diurnal changes of stomatal diffusive resistance(S.D.R.) and transpiration rate(T.R.) were investigated for determining the ecophysiological water relations of economic tree species subjected to chronic water stress or exogenous abscisic acid treatment. Four species of oaks including Quercus serrata, Q. mongolica. Q. acutissima, and Q. variabilis were used as the experimental materials and also Fraxinus rhynchophylla was studied together with oaks. Stomatal diffusive resistances were repeatedly measured on the containerized 1-0 year seedlings subjected to two kinds of soil moisture regime (wet and dry) in June, August, and September by LI-1600 Steady State Porometer of LI-Cor, Inc.. Exogenous abscisic acid (ABA) solutions of 0.5 mM and 0.05 mM in July and August, respectively, were absorbed into shoots cut from the containerized seedlings for determining their effects on stomatal behavior and transpiration. Most of measurements in stomatal diffusive resistance maintained about 5 s/cm in the morning after sunrise despite of different treatments. But the values fluctuated frequently to high level above 20 s/cm through the afternoon until sunset in the seedlings subjected to dry soil moisture regime. Despite of various treatments and environmental conditions, stomatal diffusive resistances of Q. variabilis were more stable than those of Q. serrata or Q. acutissima. Their values of F. rhynchophylla changed more irregularly in comparison with those of oak species. Exogenous abscisic acid absorbed into shoots cut from seedlings increased stomatal diffusive resistance obviously in most of the species studied. The stomatal responses to abscisic acid treatment were more sensitive in July especially in Q. serrata than in Q. variabilis and Q. acutissima. But the effects of ABA treatment were presented more remarkably in Q. acutissima in August. The responses to abscisic acid were not certain in F. rhynchophylla because of their various fluctuation patterns.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.1
• /
• pp.58-64
• /
• 2010

This study was carried out to screen the occurrence of insect pest on the organic seed producing field of minor grain germplasms, Pearl millet (Setaria italic L.), Sorghum (Sorghum bicolor L.), and Common millet (Panicum miliaceum L.) in Gangwon-do from 2008 to 2009. The artificial pheromone traps successfully attracted an Oriental corn borer, Ostrinia furnacalis (Guenee) on Pearl millet, but the Army worm, Pseudaletia separata, was not attracted in all of the minor grain fields. The ratio of damaged plants of Oriental corn borer and Army worm were appeared in order with Pearl millet, Common millet, and Sorghum. The morphological diversities of plant bug were shown as four kinds of species, Eastern green stinkbug (Nezara antennata), Brown-marmorated stinkbug (Halyomorpha halys), Sloe bug (Dolycoris baccarum), and Bean bug (Riptortus clavatus), on the organic seed producing field of minor grain. The average occurrence density of Eastern green stinkbug was the highest level in the three kind of minor grains, Pearl millet, Common millet, and Sorghum in 2008 and 2009. The dominant species are the Eastern green stinkbug and the Bean bug in Pearl millet and Common millet. The Sloe bug and the Bean bug possessed the highest population density in Sorghum.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.4
• /
• pp.404-412
• /
• 1994

Radium isotopes were measured together with oceanographical parameters in the southern coastal region of the Korean East Sea during the period of September $2{\sim}8$, 1991. In September, there were various water masses vertically distributed in this region due to formation of strongly seasonal thermoclines. These water masses were characterized by activity of radium isotopes as well as water temperature and dissolved oxygen. Among the water masses, Japan Sea Proper Water(JSPW) below $1^{\circ}C$ had the highest Ra-226 activities but the lowest Ra-228 concentrations. However, Tsushima Surface Water (TSW) above $20^{\circ}C$ in water temperature had the highest Ra-228 which decreased sharply with depth. In TSW, Ra-228 activities were in the range of $194{\sim}270$ dpm/kl, which were approximately 10 times higher than JSPW. Activity ratios(A.R's) of Ra-228/Ra-226 were $1.9{\sim}2.6$ for TSW, $0.7{\sim}1.1$ for Tsushima Middle Water(TMW) of $12{\sim}17^{\circ}C\;to\;0.4{\sim}0.7$ for North Korea Cold Water(NKCW) with $1{\sim}7^{\circ}C$ and below 0.2 for JSPW. The Ra-228/Ra-226 ranged from 0.6 to 0.9 in the cold waters of $2{\sim}6^{\circ}C$, which were observed at depth of $65{\sim}120\;m$ in this study area. Radium isotopes provided a useful means of identifying origins of the cold water which occurred annually at intermediate or bottom layers in the southern coastal zone of the Korean East Sea. By plotting radium isotopes against water temperature, it could be observed clearly that the cold waters between $2{\sim}6^{\circ}C$ did not originate from the mixed water of JSPW and TMW but from NKCW.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.4
• /
• pp.242-248
• /
• 2007

To find a feasibility of utilization of food waste slurry (FWS) generated during composting, FWS was combined with pig manure slurry (PMS) in various ratios and the change of nutrient contents and offensive odor of the combined slurries before and after fermentation were studied. The initial pH was 7.67 for PMS and 8.45 for FWS. However, during the fermentation, pH increased in the combined slurries with the higher FWS rate among the treatments while decreased in thosewith higher PMS rate. EC of each slurry sample showed that the difference among combined slurry samples has been reduced during fermentation and became stabilized in $21{\sim}23dS\;m^{-1}$ after 180 days. After 180 days fermentation, total nitrogen (T-N) decreased. T-N of mixture with a half and more FWS decreased up to 0.1%, less than the critical level (0.3%). The contents of O.M., T-N, phosphorus, calcium and magnesium decreased with fermentation while those of potash and salinity increased. From initial fermentation until 30 days, a lot of $NH_3$, as an offensive odor, was produced. However, it decreased steadily, except in higher PMS rate. In terms of producing $50{\mu}g\;ml^{-1}$ of $NH_3$, the top layer took 30 days after fertilization with FWS only, 45 days for utilized treatment with F75 (25 % of PMS), 75 days for utilized with F50 (50%) and F25 (75%) and 90 days for PMS only, respectively. $RNH_2$ also had similar trend with $NH_3$ but it was produced continuously as long fermentation proceeded. In terms of $RNH_2$, the decrease in concentration up to $50{\mu}g\;ml^{-1}$ were; 45 days for FWS only(F100), 105 days for F75 utilization, 120 daysfor F50, 165 days for F25, respectively. ethyl mercaptan was produced in PMS until 180 days after fertilization but it was not produced in FWS. Sensory tests as an integrated test of offensive odor were also done. FWS showed lower than 1 after 30 days from initial fermentation, while PMS had still offensive odor even up to 180 days from initial fermentation. It is probably affected by the continuous production of ethyl mercaptan and amines. However, considering in decrease T-N content caused by volatilization while offensive odor intensity according to official standard of fertilizer is lower than 2. Further study on controlling offensive odor needs to be done.

• Journal of Korean Academy of Nursing
• /
• v.12 no.2
• /
• pp.57-66
• /
• 1982

This study was undertaken to delineate the relationship between numerical score and the amount of nursing hours required in the nursing process. Score was a numerical description of the patients functional nursing needs. Therefore this study focused on standard nursing hours required by patient's self-care status. This study observed the 62 patients and 15 R.N. in H. university hospital from Aug. 7, 1982 to Aug. 13, 1982. 1. For the first time, each head nurse assessed self-care status by Schoening's self-care score-Minimal care patient (self-care score: 23, 24) was placed in Group Ⅰ, intermediate care patient (self-care score: 11∼22) was Group Ⅱ, and special care score: 0∼10) was Group Ⅲ. 2. We observed and recorded the nursing care received from nurses according to patient's group. (8AM∼4PM) 3. And, We observed and recorded the activities of nurses in order to determine standard nursing hours required. (8AM∼4PM) 4. If we apply the content of paragraph 3 to paragraph 2, we will predict the number of patient that nurse can care during day time by self-care status. The following results were obtained: 1) Patient's mean self-care score were Group I : 23.9 score Group Ⅱ：17.8 score Group Ⅲ : 1.6 score 2) Nursing hours required by patient's physical function(self-care status) status were Group I : 35 min. Group Ⅱ: 47.5 min. Group Ⅲ : 104.6 min. 3) Nurse's nursing time and distribution required in nursing activities during day duty were A.D.L. : 84.3min. (17.56％) Functional nursing activities : 279.9min. (58.31 ％) Education ＆ Emotional support : 11.3min. (2.35%) Task unrelated patients : 54min. (11.25%) Non Productive nursing care : 50. 5min. (10.52％) 4) Mean nursing hours required by each patient and the number of patient that nurse can rare during day duty by self-care status were Group I : 38.6min. 11.1 patients/1 nurse Group Ⅱ : 51.1min: 8.4 patients/1 nurse Group Ⅲ： 108.2min. 4 patients/1 nurse It seems reasonable that this could be done effectively as each-unit has an established standard for hours required, This not only allows time for planning of staff but helps to avoid the very human inclination to predict excessive staffing requirements by placing the majority of patients in high care group.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.2
• /
• pp.225-236
• /
• 2016

Objectives: Nanomaterials have been used in various fields. As use of nanoproducts is increasing, workers dealing with nanomaterials are also gradually increasing. Exposure assessments for nanomaterials have been carried out for protection of worker's health in workplace. Exposure studies were mainly focused on manufacturing processes, but these studies on after-treatment processes such as refinement, weighing, and packing were insufficient. So, we investigated exposure characteristics of particles during after-treatment processes of $Al_2O_3$ fibers and Ni powders. Methods: Mass-production of Ni powder process was carried out in enclosed capture-type canopy hood. In a developing stage, $Al_2O_3$ was handled with a local ventilation unit. Exposure characteristics of particles were investigated for $Al_2O_3$ fiber and Ni powder processes during the periods of 10:00 to 16:00, 20 May 2014 and 13:00 to 16:00, 21 May 2014, respectively. Three real-time aerosol instruments were utilized in exposure assessment. A scanning mobility particle sizer(SMPS, nanoscan, model 3910, TSI) and an optical particle counter(OPC, portable aerosol spectrometer, model 1.109, Grimm) were used to determine the particle size distribution in the size range of 10-420 nm and $0.25-32{\mu}m$, respectively. In addition, a nanoparticle aerosol monitor(NAM, model 9000, TSI) was used to measure lung-deposited nanoparticle surface area. Membrane filters(isopore membrane filter, pore size of 100 nm) were also used for air sampling for the FE-SEM(model S-5000H, Hitachi) analysis using a personal sampling pump(model GilAir Plus by 2.5 L/min, Gilian). Conclusions: For Ni powder after-treatment process, only 27% increase in particle concentration was found during the process. However, for $Al_2O_3$ fiber after-treatment process, significant exposure(1.56-3.34 times) was observed during the process.

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.430-436
• /
• 2007

The dinuclear half-sandwich CGCs (constrained geometry catalyst) with a polymethylene bridge, $[Ti({\eta}^5 : {\eta}^1-indenyl)SiMe_2NCMe_3]_2(CH_2)_n]$[n = 6 (1) and 12 (2)], have been employed in the copolymerization of ethylene and norbornene (NBE). To compare the mononuclear metallocene catalysts; $Ti({\eta}^5 : {\eta}^1-2-hexylindenyl)SiMe_2NCMe_3$ (3), $(Cp^* SiMe_2NCMe_3)$Ti (Dow CGC) (4) and ansa-$Et(Ind)_2ZrCI_2$ (5), were also studied for the copolymerization of ethylene and NBE. It was found that the activity increased in the order: 1 < 2 < 3 < 5 < 4, indicating that the presence of the bridge between two the CGC units contributed to depressing the polymerization activity of the CGCs. This result strongly suggests that the implication of steric disturbance due to the presence of the bridge may playa significant role in slowing the activity. Dinuclear CGCs have been found to be very efficient for the incorporation of NBE onto the polyethylene backbone. The NBE contents in the copolymers formed ranged from 10 to 42%, depending on the polymerization conditions. Strong chemical shifts were observed at ${\delta}$42.0 and 47.8 of the isotactic alternating NBE sequences, NENEN, in the copolymers with high NBE contents. In addition, a resonance at 47.1 ppm for the sequences of the isolated NBE, EENEE, was observed in the $^{13}C-NMR$ spectra of the copolymers with low NBE contents. The absence of signals for isotactic dyad at 48.1 and 49.1 ppm illustrated there were no isotactic or microblock (NBE-NBE) sequences in the copolymers. This result indicated that the dinuclear CGCs were effective for making randomly distributed ethylene-NBE copolymers.

• Korean journal of applied entomology
• /
• v.46 no.2
• /
• pp.213-219
• /
• 2007

The development of Schizaphis graminum (Rondani) was studied at various constant temperatures ranging from 15 to $32.5^{\circ}C$, with $65{\pm}5%$ RH, and a photoperiod of 16L:8D. Mortality of the $1_{st}-2_{nd}\;and\;the\;3_{rd}-4_{th}$ stage nymphs were similar at most temperature ranges while at high temperature of $32.5^{\circ}C$, more $3_{rd}-4_{th}$ stage individuals died. The total developmental time ranged from 13.8 days at $15^{\circ}C$ to 4.9 days at $30.0^{\circ}C$ suggesting that the higher the temperature, the faster the development. However, at higher end temperature of $32.5^{\circ}C$ the development took 6.4 days. The lower developmental threshold temperature and effective accumulative temperatures for the total immature stage were $6.8^{\circ}C$ and 105.9 day-degrees, respectively and the nonlinear shape of temperature related development was well described by the modified Sharpe and DeMichele model. The normalized cumulative frequency distributions of developmental period for each life stage were fitted to the three-parameter Weibull function. The attendance of shortened developmental times was apparent with $1_{st}-2_{nd}\;nymph,\;3_{rd}-4_{th}$ nymph, and total nymph stages in descending order. The coefficient of determination $r^2$ ranged between 0.80 and 0.87.

• Journal of Korean Academy of Nursing
• /
• v.26 no.2
• /
• pp.387-398
• /
• 1996

The objective of this study was to clarify whether there are any differences between normal and over-weight middle-aged(40∼59yrs)women in their perceived weight, health status, health conception and health behavior choices. The sample consisted of 39 normal weight and 55 over-weight (11％ above on the Body Index Scale) women who live in Juan, Inchon. The Participants were randomly selected in each weight group considering socio-demographic factors. The findings from this study are summarized below. 1) Among the 55 overweight middle-aged women, 16 were above 20％ on the Body Index Scale and 14 were above 30％. Twenty-five(45.5％) of the overweight group and 12(30.8％) of the normal weight group had one disease, and there were 12(21.8％) in the overweight group and 8(20.5％) in the normal weight group where one of the family members had a disease, but these differences were not statistically significant. The average monthly family income for the overweight group was ￦l,880,000 compared to ￦2,140, 000 for the normal weight group, but this difference was also not significant. The age range for the whole group was between 40 and 59(mean＝46.8 for total, 48.6 for overweight and 45.7 for normal weight group). Again no significant difference found. Occupations were housemaker 53(56.4％), private business(13.8％), salarywoman(9.6％), and teacher (2.1％). Thirty housemaker(54.5％) from the overweight group and 23(59％) from the normal group did not constitute a statistically significant different. For the educational status, 34(61.8％) of the overweight women and 33(84.6％)of the normal weight group finished high school or more educational courses, but there was no significant statistical difference. Eleven(20.0％) of the overweight women and 5(12. 8％) of the normal weight group were single, but again no significant statistical difference was found. 2) A test for difference in health characteristics between two weight groups indicated that two groups do not show statistical differences in their perceived health status, health conception or health behavior choice. That is, the overweight group, also perceive their health status as good as the normal group, and regard ‘Health’ as a state that enables them to carry out social roles and functions rather than as the traditional concept of health as no disease or no symptoms. Moreover. the overweight group selected their health behaviors not for the prevention of diseases or maintenance of health but for promotion of health. To determine if no statistical difference might be related to the overweight group's failure of perceive themselves as overweight, the perceived and objective overweight status were compared by the chi-square analysis, and no difference was found（X/sup²＝49.37, df＝1, p＝.000）. However, 7(17.9％) of the normal group perceived themselves as being overweighted and 7(12.7％) of the overweight group thought they were of normal weight. Even though the overweight group employed in this study perceived themselves as being overweight, they regarded themselves as healthy as those in the normal weight group. It was shown that there was no statistical difference between two groups in health conception, and that they chose health behaviors to promote health status. 3) Perceived health conception was shown to be significantly related to health behavior choice （r＝ .28, p＝.006 for whole group : r＝.33, p＝.014 for overweight group : and r＝.12. p＝.463 for normal group） .There was an indication that the more complicated the perceived health conception was, the more the trend of health behavior choice to promote health. This was especially true for the overweight group. But, the perceived health status did not related to health behavior choice statistically（r＝.13, p＝.202）, and it was thought that reasons for selecting health behaviors were not related to their health status. That is, the overweight group perceive themselves as healthy as the normal weight group or thought that overweight itself does not incur any risk on their health. Data from two groups were combined and analyzed with multiple regression methodology, because the relationship pattern of the two groups was similar. The analysis showed that health behavior has a significant relationship with age and the perceived health conception（r/sup²＝.1517, p=.05, F＝8.133）. It means they come to health behavior along with their health conception and their age rather than their weights, perceived weight, health status or other social characteristics. This study was intended to understand how overweight middle-aged women perceive ‘weight’ and ‘health’, and how they meet their health related needs in comparison with normal weight middle-aged women. Other factors related to the health behavior in overweight middle-aged woman need to be determined through further descriptive studies outlined in the following recommendations. a) Reseach with the study area expanded. b) Reseach with grouping more detailed : much more overweight and underweight group c) Reseach on restricted relationship between overweight and age or profession. d) Reseach on what overweight middle-aged women do to reduce their weight and what factors motivate them to do it

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}