• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.841-846
• /
• 2003

Landrace(L), Largewhite(Lw), Korean Native Pig(KNP) and commercial hybrid were experimented to determine holothane sensitivity, RYR gene mutation and quality profiles. In the results of halothane test, the incidence of halothane positive pigs was similar between L and Lw. But, the rate of dubious halothane positive type was higher in L than Lw. In hal-gene analysis, halothane-positive pigs(nn) were not found in any tested breed and heterotype(Nn) appeared only in one pig of L. Of the breed effect on the quality profiles, there were no differences in pH$_1$(pH at 1hr postslaughter), but pH$_{u}$(pH at 24hr postslaughter) was significantly higher in commercial hybrid and KNP than other breeds(p〈0.05). Color assessed by National Pork Producers Council(NPPC) and CIE L$^{*}$ was significantly paler in L breed than other breeds(p〈0.05). Significant differences were found in water holding capacity(WHC) and cooking loss in KNP(p〈0.05).

• Clean Technology
• /
• v.4 no.1
• /
• pp.45-59
• /
• 1998

Continuous immobilized-cell culture was carried out for the production of kasugamycin, a secondary metabolite by a filamentous bacteria, Streptomyces kasugaensis, with an intention of reducing waste generation. A sporulation medium was developed for production of bulk amounts of spores, and the spores were entrapped into celite biosupports for immobilization. It was possible to effectively keep the immobilized-cells inside the reactor during the continuous culture by an efficient immobilized cell separator of decantor type on the outlet of the fermentor. Using this continuous immobilized-cell fermentor system, we investigated the effects of feed substrate and phosphate concentrations on kasugamycin production and chemical oxygen demand(COD). Comparing with the conventional suspended-cell batch culture, the kasugamycin productivity was observed to increase by 2.5 times, whereas COD per unit kasugamycin production decreased by 2.3 times in the continuous immobilized-cell culture. Based on these results, the continuous immobilized-cell system was considered to be a cleaner bioprocess than the conventional batch suspended-cell system.

• Molecules and Cells
• /
• v.24 no.2
• /
• pp.200-209
• /
• 2007

We generated gene expression data from the tissues of 50 gastric cancer patients, and applied meta-analysis and gene set analysis to this data and three other stomach cancer gene expression data sets to define the gene expression changes in gastric tumors. By meta-analysis we identified genes consistently changed in gastric carcinomas, while gene set analysis revealed consistently changed biological themes. Genes and gene sets involved in digestion, fatty acid metabolism, and ion transport were consistently down-regulated in gastric carcinomas, while those involved in cellular proliferation, cell cycle, and DNA replication were consistently up-regulated. We also found significant differences between the genes and gene sets expressed in diffuse and intestinal type gastric carcinoma. By gene set analysis of cytogenetic bands, we identified many chromosomal regions with possible gross chromosomal changes (amplifications or deletions). Similar analysis of transcription factor binding sites (TFBSs), revealed transcription factors that may have caused the observed gene expression changes in gastric carcinomas, and we confirmed the overexpression of one of these, E2F1, in many gastric carcinomas by tissue array and immunohistochemistry. We have incorporated the results of our meta- and gene set analyses into a web accessible database (http://human-genome.kribb.re.kr/stomach/).

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.455-462
• /
• 1995

The new six herbicidal N-[(pyrimidin-2-yl)aminocarbonyl]-2-substituted-6-(1-hydroxy-2-fluoroethyl)benzenesulfonamide derivatives(S) were synthesized and rate constants for the hydrolysis of thier in the range of pH $1.0{\sim}10.0$ have been studied in 15%(v/v) aqueous acetonitrile solution at $45^{\circ}C$. From the basis of the results, pH-effect, solvent effect, ortho-substituent effect, thermodynamic parameters(${\Delta}H^{\neq}$ & ${\Delta}S^{\neq}$), pKa constant(4.80), rate equation, analysis of hydrolysis products(2-(1-hydroxy-2-fluoroethyl)benzenesulfonamide & 4,6-dimethoxyaminopyrimidine), it may be concluded that the general acid catalyzed hydrolysis through $A-S_E2$ mechanism and specific acid catalyzed hydrolysis through A-2 type(or $A_{AC}2$) mechanism proceeds via conjugate acid($SH^+$) and tetrahedral intermediate(I) below pH 8.0, whereas, above pH 9.0, the general base catalyzed hydrolysis by water molecules(B) through $(E_1)_{anion}$ mechanism proceeds via conjugate base(CB). In the range between $pH\;7.0{\sim}pH\;9.0$, these two reactions occur competitively.

• Elastomers and Composites
• /
• v.48 no.1
• /
• pp.10-17
• /
• 2013

Polyolefin-g-poly(t-butylstyrene) as one of the high-temperature polyolefin-based thermoplastic elastomers was synthesized by the graft-from anionic living polymerization from the styrene moieties of the linear poly(ethylene-ter-1-hexene-ter-divinylbenzene) as a soft block to form the hard end blocks, poly(t-butylstyrene). The chemistry of the anionic graft-from polymerization involved complete lithiation of the pendant styrene unit of the soft polyolefin elastomer with sec-BuLi/TMEDA followed by the subsequent graft anionic polymerization of 4-tert-butylstyrene with Mn=10,000~30,000 g/mol. The graft-from living anionic polymerization were very effective and the grafting size increased proportionally with increasing monomer concentration and the reaction times. The synthetic methodology for the multi-hydroxyl chain-end modified polyolefin-g-poly(t-butylstyrene) was proposed by using the thiol-ene click reaction between 2-mercaptoethanol and the polyolefin-g-[poly(t-butylstyrene)-b-high vinyl polyisoprene], which was obtained from the subsequent living block copolymerization using polyolefin-g-Poly(t-butylstyrene) with isoprene. The result indicated that this process produced a new well-defined functionalized graft-type polyolefin-based TPE with high $T_g$ hard block(> $145^{\circ}C$).

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.3 s.47
• /
• pp.369-375
• /
• 2004

In this study, liquid crystalline (LC) is formed using Gemini surfactant (GS) type and moisturizing effect in vivo is measured. $3.0\;wt\%$ of sodium dicocoyl ethylene diamine (PEG)-15 sulfate (SCD-PEG-15S) is used as GS and $4.0\;wt\%$ of hydrogenated dimer acid esters (HDAE) as booster. For stabilizers, $2.0\;wt\%$ of behenyl alcohol (BA) and $1.0\;wt\%$ of Iyso-lecithin (LyL) are utilized. It is stabilized in pH from 4.0 to 10.5 and the best condition is in pH 6.5. The value of viscosity is $8,000\pm500$ cP. The most excellent particles are formed within the range of 4.0 to 15.5 um. Formed LC is observed around LC particles using polarization microscope. It is also observed that lamellar gel network structure is formed around LC particles. Moisturizing effect is improved by $13.6\%$ (P<0.05) compared to control when measured 30 min later after coating samples. After 1 h, moisturizing effect is improved by 1$12.6\%$ (P<0.05) than control while showing $28.3\%$ (P<0.05) of improvement after 4 h. These results may be caused from that manufactured LC forms lamellar structure so that it has better water-holding ability and absorbance of oil increases. This formula could be utilized by delivery system (DS) on skin so that this technology can be applied for manufactuing pharmaceuticals and cosmetics.

• Journal of the Korean association of regional geographers
• /
• v.14 no.5
• /
• pp.521-535
• /
• 2008

This paper aims to explore the spatial distribution and locational characteristics of the shipbuilding industry in the south-east region of Korea. The geography of the Korea's shipbuilding industry illustrates an absolute spatial concentration into the south-east region, including Gyeongnam, Busan and Ulsan. In view of the type of agglomeration, it is argued that the south-east region's shipbuilding industry has been evolved as an Advanced Hub & Spoke cluster, which is characterized by interconnected relationships between a couple of gigantic customer firms and the majority of small and medium-sized supplier firms. A survey on the locational factors of the firms presents that traditional locational factors, such as physical infrastructure, land, labour and industrial linkages, are more important than new economic geographical locational factors, such as knowledge, learning, innovation and networks. According to firm's evaluation of the Gyeongnam region's locational environments for the shipbuilding industry is, however, rather different to the result of firm's location decision factors. The shipbuilding firms in Gyeongnam see that the Gyeongnam region retains regional advantages in terms of agglomeration economies, geographical proximity to customers, the infrastructure of transportation and communication and the quality of life. On the contrary, firms recognize that the Gyeongnam region suffers from the lack of R&D and production workforce and a weak basis of industry-university -government networks.

• The Journal of Engineering Geology
• /
• v.18 no.2
• /
• pp.227-232
• /
• 2008

In this study, the pull out resistance characteristics of an anchor bar to support a spillway installed in a slope are investigated by field tests. The injection materials were a cement mortar and cement milk. Unconfined compression strengths of those materials under several conditions were measured. As the result of compression test, the unconfined compression strengths of the cement mortar and the cement milk have positive proportional relation-ship with the water-cement ratio. They also have negative proportional relationship with increasing the curing time. In the same condition of water-cement ratio and curing time, the unconfined compression strength of cement milk is larger than that of cement mortar. In order to reduce the eccentricity in anchor bar during pull-out test in the field, the installation apparatus was improved by inserting a nut type of steel fixing coupling into the anchor bar. As the result of the pull-out test, the strength modification of cement milk was increased steeply at the early curing time. However, that of cement mortar was increased gradually with passing the curing time. Therefore, the cement milk has to use as the injection material for a prompt construction of anchor bar because the strength modification of cement milk is occurred at the early curing time.

• Korean Journal of Animal Reproduction
• /
• v.14 no.4
• /
• pp.237-244
• /
• 1990

These studies were carried out to investigate the effects of the follicles size, hormone supplementation, semen types and capacitation methods on in vitro maturation and fertilization of bovine follicular oocytes. The ovaries were obtained from slaughtered Korean Native cows. The follicular oocytes surrounded with cumulus cells were recovered by aspirating follicular fluid from the visible follicles of diameter 3~5mm. The follicular oocytes were cultured in TCM-199 medium containing hormones, FCS, ECS, BFF and MCC for 24~48hrs. in a incubator with 5% CO2 in air at 38.5$^{\circ}C$ and then matured oocytes were again cultured for 18~20hrs. with motile capacitated sperm in the TCF(Tyroide calcium-free) solution containing 200$\mu\textrm{g}$/ml of heparin. The results obtained in these experiments were summarized as follows : 1. The oocytes classified as "A, B, C, D and Degenerative" depending morphological integrity and those were 61.4%, 12.1%, 19.2%, 4.2% and 3.0% of the total oocytes recovered, respectively. The maturation and fertilization rate of the A, B, C class follicular oocytes, cultured in the TCM-199 medium supplemented with 10% FCS were 89.1%, 78.0%, 52.6% and 78.1%, 66.1%, 33.3%, respectively. 2. The average number of the follicular oocytes recovered from follicles size, 1~2mm, 3~5mm and above 5mm in dimeter were 67, 98 and 63, respectively. The maturation and fertilization rate of the follicular oocytes, cultured in the TCM-199 medium were 56.7%, 82.5%, 46.0% and 44.8%, 71.4%, 28.6%, respectively. 3. The maturation and fertilization rate of follicular oocytes, cultured in the TCM-199 medium supplemented with 5%, 10%, 15%, 20% FCS and hCG, HCG, $\beta$-estradiol were 76.0%~82.3% and 26.2%~70.0%, and those values were higher the supplementation of the hormone than the non-supplementation. 4. The fertilization and cleavage rate of the follicular oocytes, inseminated with spermatozoas of epididymis cauda, neat and frozen semen were 63.3%, 73.3%, 70.0% and 32.7%, 37.8%, 38.3, respectively. 5. The fertilization and cleavage rate of follicular oocytes, fertilized with capacitated spermatozoas by heparin, BFF and HIS methods were 70.0%, 53.8%, 34.2% and 38.3%, 23.1%, 17.1%, respectively. And the fertilization and cleavage rate were higher method of heparin than other methods.r methods.

• Polymer(Korea)
• /
• v.28 no.5
• /
• pp.404-411
• /
• 2004

The microcapsules containing triphenyl phosphate (TPP), a flame retardant, were prepared by phase-inversion emulsification technique using the epoxy resin (Novolac type) with excellent physical properties and network structure. This microencapsulation process was adopted for the protection of TPP evaporation and wetting of polymer composite during the polymer blend processing. The TPP, epoxy resin and mixed surfactants were emulsified to oil in water (O/W) by the phase inversion technology and then conducted on the crosslinking of epoxy resin by in-situ polymerization. The capsule size and size distribution of TPP capsules was controlled by mixed surfactant ratio, concentration and TPP contents, The formation and thermal property of TPP capsules were measured by differential scanning calorimetry and thermogravimetric analysis. The morphology and size of TPP capsules were also investigated by scanning and transmission electron microscopies. As the surfactant concentration increased, the TPP capsules were more spherical and mono-dispersed at the same weight ratio of mixed surfactants (F127: SDBS).