• 산업경영시스템학회지
• /
• 제32권2호
• /
• pp.45-56
• /
• 2009

The use of national R&D reports becomes a difficult task due to the different level of service being provided and the different way used for its construction by the institute in management. One-stop service of its contents is impossible and there is a lack of specialized service such as a system to satisfy the various needs of the researchers. This study analyzes the laws related to the national R&D reports and the evaluation system of the R&D outputs for the design and construction of the DB and system for the management of the national R&D reports. We also perform an analysis of the economic effect of the system.

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.153-162
• /
• 2017

무기체계는 기술의 발달로 인하여 급속도로 발전하고 있다. 이러한 발전덕분에 과거 무기체계에서 보지 못했던 고가의 첨단 전자장비들이 포함된 무기체계가 등장하게 되었다. 더불어, 고도의 기술이 적용된 무기체계의 운영 및 유지보수를 위한 장비유지예산 또한 증가되고 있다. 그러나 장비유지예산은 장비자산대비 그 비율이 감소추세에 있어, 효율적인 무기체계 운영에 어려움이 초래되고 있다. 이처럼 고비용 환경이 되고 있는 국방경영 및 감소되고 있는 장비유지예산을 고려하는 연구가 필요하다. 본 연구는 무기체계를 운영 및 유지보수 하는데 필요한 정비장비에 초점을 두고 있다. 최신 무기체계는 계측장비와 같은 정비장비를 활용하여 무기체계의 정렬 및 검교정 절차를 수행 후, 적정한 무기 성능이 유효하다고 볼 수 있다. 이러한 계측장비는 주기적으로 업체 외주정비(검교정 절차)를 하여 계측장비 자체의 정렬 및 상태 이상 유무를 확인해야 한다. 일반적으로 계측장비는 신뢰성이 입증된 해외업체의 계측장비를 구매하게 되고, 이러한 계측장비는 주기적으로 해외 외주정비를 받을 수밖에 없게 된다. 즉, 정비장비가 해외 외주정비를 진행하는 동안, 해당 무기체계는 성능에 대해 신뢰할 수 없으며 불가용 상태라고 볼 수 있다. 본 연구의 목적은 정비장비의 해외 외주정비로 인해 발생하는 무기체계의 손실비용과 정비장비의 구매 비용을 비교하여, 적절한 정비장비의 구매 대수를 제시하고자 한다. 본 연구의 결과가 효율적 작전 수행 보장에 기여할 것으로 판단되며, 전력 공백 문제를 해결 가능한 방안이 될 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.634-637
• /
• 1997

This paper is on the research and development of new SIV(Static Inverter) using IGBT(Insulated Gate Bipolar Transistor) semiconductor for a wide range of electric railway applications. For the simplification and higher controllability, the direct PWM control method with 3level inverter topology was adopted. In the new SIV system, the cost as well as bulk and weight was appreciably reduced about 40% lower than those of conventional SIV, the electrical efficiency was increased above 95% and the audible noise level was less than 65dB. In addition, the THD(Total Harmonic Distortion) factor was below 5% and the voltage fluctuation on a transient state was below 10%.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 1996년도 제10회 동계학술발표회 논문집
• /
• pp.141-153
• /
• 1996

Firms prefer in some specific conditions cooperative R&D to non-cooperative for developing technology. Previous studies on the conditions show firms want to choose cost-sharing type of cooperative R&D (the CS-RJV) rather than non-cooperative one when target technology is either 'relatively easy'or 'relatively difficult', and to join multiple-research type of cooperation (the MR-RJV) than to compete each other if technology is only 'relatively easy'. However, by introducing technological spillover as well as difficult of technology, only if there shown that this seemingly contrasted phenomenon almost disappears : the MR-RJV can i3e also preferred by firms even in case of 'relatively difficult'technology only if there exists some extent of a technological spillover.

• 시스템엔지니어링학술지
• /
• 제8권1호
• /
• pp.51-62
• /
• 2012

The System Engineering(SE) and the Earned Value Management System(EVMS), as parts of the scientific project management methodology, have been applied to Surion Helicopter R&D Program. The concept and application process of SE methodology, requirements management and applications output by DOORS program are described in this study. The concept and application process of EVMS, analysis results of schedule/cost variance for Surion RF equipment are also discussed in this study. Though the Surion R&D program is still on-going, it is found that the measures of effectiveness of SE and EVMS applications are verified.

• 한국국방경영분석학회지
• /
• 제2권1호
• /
• pp.111-125
• /
• 1976

This paper is to explore technological forecasting methodologies and their application to military R&D programming. Among a number of forecasting methodologies, eight frequently used methods are explained. They are; Delphi method, analogy, growth curve, trend extrapolation, analytical model, breakthrough, normative method, and combined method. Due to the characteristic situation of a developing country, the application of technological forecasting to the Korean military R&D programming is limited. Therefore, only two forecasting methods such as Delphi and normative method are utilized in the development of a decision model for the military R&D programming. The model consists of a dynamic programming using decision tree model, which optimizes the total cost to equip a certain military item under a given range of risk during a given period. Some pitfalls in forecasting methodologies and of the model are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.927_929
• /
• 2009

This paper reports the case that unitizes heat analysis simulation in housing design of DC-DC converter. Icepak4.3 is used for heat analysis simulation program. 1.5kW prototype is produced with base of finally selected structure through simulation and is compared heating characteristic. Propriety of development application is confirmed through the result, shortening case of development cost and period is introduced.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1497-1500
• /
• 2006

Inkjet printing technology can reduce the LCD color filter manufacturing cost more than 50 %. Uniform color filter patterning can be achieved only with proper ink and barrier materials. We developed new ink and black matrix materials for inkjet color filter. The ink materials have low volatility while they have very high solid content. The black matrix materials have very precisely controlled surface energy so that the inks can fill the pixels evenly and completely. We controlled the ink drop volume and ink material to minimize the thickness difference between the black matrix and the color pixel. Micron-order jetting position accuracy was achieved. We successfully printed 14.1" color filters using our ink and black matrix materials.

• 산업경영시스템학회지
• /
• 제27권2호
• /
• pp.1-9
• /
• 2004

This study aims to examine the relationship between total quality management(TQM) practices and operational performance perceived by employees who are in different functional organization types, R&D function and Non-R&D function organization in manufacturing companies. Operational performance is defined as the degree of operation efficiency in the perspective of quality, delivery, and cost. Our study showed that the significant elements of TQM practice were different depending on functional organization types. In case of R&D organization, the categories of customer focus and process management were the strongest significant predictors of operational performance. Therefore, the optimal TQM practices for R&D organization can be obtained in consideration of customer focus and process management.

• 한국레이저가공학회지
• /
• 제11권3호
• /
• pp.21-24
• /
• 2008

Hybrid laser welding technology is a good process to reduce a thermal distortion and increase the productivity. However, it requires a high investment and a massive modification of the fabrication line such as a gantry system, milling machine for the edge preparation, high power laser system and weld machine. Therefore the development of an economical laser welding system is a crucial point to apply this system in shipbuilding yard. In this study, a portable hybrid laser welding carriage was developed for I-butt joint without edge milling. It is expected that the carriage type system could reduce investment cost.