• Journal of agriculture & life science
• /
• v.44 no.3
• /
• pp.41-52
• /
• 2010

This study was conducted to estimate genetic parameters for growth traits using multivariate animal models in Yorkshire breed. For the study, 16,202 records for growth traits collected between the year 1999 and 2005 from Yorkshire pigs in K GGP were used. The effects of environmental factors such as sex, birth year, birth season, parity and birth weight group affected growth traits significantly (p<0.01). Birth weight tended to be positively correlated with average daily gain (ADG) and lean percent. But it seemed to affect age at 90 kg, average adjusted backfat thickness (BF), and eye muscle ares (EMA) negatively. For average pig suckling weight (ASW) and total weight at suckling (TWS), the higher birth weight is the better performance. But, in case of total number of born and number of suckling, the result was shown vice versa. Approximately 10~30% lower heritability estimates were obtained for growth traits by using the model that includes descriptions of common litter effects (CL) than by using the model that ignores those (NCL) for more accurate estimation of heritability. The estimates of heritabilities were 0.468, and 0.328 for ADG, 0.474 and 0.326 for age at 90 kg, 0.452, and 0.396 for BF, 0.240 and 0.200 for EMA and, 0.458, and 0.380 for lean percent in NCL and CL, respectively. Therefore, in order to estimate optimal genetic parameters, it could be inferred that the statistical model which considers litter effects must be applied.

• Journal of agriculture & life science
• /
• v.44 no.5
• /
• pp.91-99
• /
• 2010

The objective of this work was to investigate the influence of ultrasonification on extraction yield and chemical properties of green tea infusion. Changes in total soluble matter(TSM), vitamin C, total phenolic compounds, flavonols, catechins, caffeine, free amino acids contents in green tea infusion(GTI) influenced by ultrasonification at $60^{\circ}C$ of extraction temperature for 1, 5, 30, and 60 min were investigated. The amount of infused TSM increased about 5.3% by ultrasonification for 60min. Vitamin C contents also increased 0.21, 0.16, 0.31 mg/g from 1 to 30 min by ultrasonification. However, vitamin C decreased from 2.47 to 2.22 mg/g at 60min. Total phenol compounds contents increased about 10~13 mg/g on all extraction times by ultrasonification. Flavonols such as, myricetin, quercetin, kaempferol were increased to doubled contents as an influence of ultrasonification. Catechins such as, EGCG, EGC, ECG, EC, (+)-C and caffeine contents showed same tendency as the results of vitamin C. On the other hand, result of free amino acids showed different tendency. All amounts of free amino acids did not increase by ultrasonification. Consequently, content of bioactive compounds such as, vitamin C, total phenolic, flavonols and catechins in green tea infusion were influenced by ultrasonification.

• Journal of Bio-Environment Control
• /
• v.30 no.3
• /
• pp.196-205
• /
• 2021

This research was conducted in order to analyze the difference in yield through the changes in growth and measuring the photosynthesis efficiency in cherry tomatoes. Seedlings of cherry tomato 'Nonari' were used as scion and non-grafted control, while 4 different grafted tomatoes 'Powerguard', 'T1', 'L1', and 'B.blocking' were used as rootstocks. Plants grafted onto 'B.blocking' produced the highest fruit yield (417.5 g plant^-1), whereas non-grafted plant 'Nonari' had the lowest fruit yield, (354.2 g plant^-1) at the latter period of cherry tomatoes in May. The flowering position in May, plant grafted onto 'B.blocking', showed 14-17 cm, whereas non-grafted plant 'Nonari' showed 10-14 cm. The growth strength on May 15, non-grafted plant 'Nonari', showed 8.43 mm which was the lowest value among the treatments. Grafted plants kept the growth balance until the end of the harvest that led to an increase in fruit yield, while non-grafted plant weakened the vigor earlier that led to a decrease in fruit yield. Grafted plants showed higher values of chlorophyll fluorescence variables than the values of non-grafted plant. These results indicate that grafting influenced fruit yield which was observed as maintaining growth balance for longer and an increase in photosynthesis efficiency compared to non-grafting.

• Journal of the Geological Society of Korea
• /
• v.54 no.5
• /
• pp.529-544
• /
• 2018

Dongrae hot spring belongs to the residual magma type and has a long history of bathing since the Silla dynasty in Korea. Due to long development of hot spring water, it is expected that the amount of hot spring water in Dongrae hot spring has been changed. In this study, long-trem water level data of Dongrae hot spring were examined for recognizing the change of the hot spring. By the fluctuation analysis of the hot spring water level from January 1992 to July 2018, the maximum and minimum annual drawdowns of no. 27 well were 137.70 and 71.60 meters, respectively, with an average drawdown of 103.39 m. On the other hand, the maximum and minimum annual drawdowns of no. 29 well were 137.80 and 71.70 meters, with an average drawdown of 103.49 m. Besides, drawdown rate became bigger in recent years. As a result of analyzing autocorrelation of the two wells, the correlation coefficient ranged from 0.919 to 0.991, showing seasonal groundwater level fluctuation. The cross correlation analysis between water level and precipitation as well as water level and hot spring discharge resulted in the correlation coefficients of -0.280 ~ 0.256 and 0.428 ~ 0.553, respectively. Therefore, using Dongnae hot-spring water level data from 1992 to 2018, the Mann-Kendall test and Sen's test showed that the continuous decline of water level was mainly caused by the pumping of the hot spring water among various reasons.

• Food Engineering Progress
• /
• v.21 no.4
• /
• pp.360-366
• /
• 2017

Fish skin peptide-loaded liposomes were prepared in 100 mL and 1 L solution as lab scales, and 10 L solution as a prototype scale. The particle size and zeta potential were measured to determine the optimal conditions for the production of fish skin peptide-loaded liposome. The liposome was manufactured by the following conditions: (1) primary homogenization at 4,000 rpm, 8,000 rpm, and 12,000 rpm for 3 minutes; (2) secondary homogenization at 40 watt (W), 60 W, and 80 W for 3 minutes. From this experimental design, the optimal conditions of homogenization were selected as 4,000 rpm and 60 W. For the next step, fish peptides were prepared as the concentrations of 3, 6, and 12% at the optimum manufacturing conditions of liposome and stored at $4^{\circ}C$. Particle size, polydispersion index (pdI), and zeta potential of peptide-loaded liposome were measured for its stability. Particle size increased significantly as manufacture scale and peptide concentration increased, and decreased over storage time. The zeta potential results increased as storage time increased at 10 L scale. In addition, 12% peptide showed the formation of a sediment layer after 3 weeks, and 6% peptide was considered to be the most suitable for industrial application.

• Journal of Life Science
• /
• v.31 no.1
• /
• pp.90-99
• /
• 2021

In this study, to reduce the production cost of poly(3-hydroxyalkanoates) (PHA), optimal cell growth and PHA biosynthesis conditions of the isolated strain Pseudomonas sp. EML8 were established using waste frying oil (WFO) as the cheap carbon source. Gas chromatography (GC) and GC mass spectrometry analysis of the medium-chain-length PHA (mcl-PHAWFO) obtained by Pseudomonas sp. EML8 of WFO indicated that it was composed of 7.28 mol% 3-hydrxoyhexanoate, 39.04 mol% 3-hydroxyoctanoate, 37.11 mol% 3-hydroxydecanoate, and 16.58 mol% 3-hydroxvdodecanoate monomers. When Pseudomonas sp. EML8 were culture in flask, the maximum dry cell weight (DCW) and the mcl-PHAWFO yield (g/l) were showed under WFO (20 g/l), (NH4)2SO4 (0.5 g/l), pH 7, and 25℃ culture conditions. Based on this, the highest DCW, mcl-PHAWFO content, and mcl-PHAWFO yield from 3-l-jar fermentation was obtained after 48 hr. Similar results were obtained using 20 g/l of fresh frying oil (FFO) as a control carbon source. In this case, the DCW, the mcl-PHAFFO content, and the mcl-PHAFFO yields were 2.7 g/l, 62 wt%, and 1.6 g/l, respectively. Gel permeation chromatography analysis confirmed the average molecular weight of the mcl-PHAWFO and mcl-PHAFFO to be between 165-175 kDa. Thermogravimetric analysis showed decomposition temperature values of 260℃ and 274.7℃ for mcl-PHAWFO and mcl-PHAFFO, respectively. In conclusion, Pseudomonas sp. EML8 and WFO could be suggested as a new candidate and substrate for the industrial production of PHA.

• Food Science and Industry
• /
• v.50 no.4
• /
• pp.82-91
• /
• 2017

The purpose of this study was to investigate development and nutrient analysis of traditional food in the Sunchang area. A total 6 kinds of set tables was excavated from storytelling. Among set tables, taste and season food were the best in Sunchang gochujang hanjeongsik and Sunchang arirang season table. Shape color, smell, and commercialization possibility and differentiation were best in Sunchang arirang season table. Mole Ratio of sodium and potassium was 1:1 in Sunchang gochujang hanjeongsik and Sunchang arirang season table. The calcium contents in Sunchang gochujang hanjeongsik and Sunchang arirang season table were higher than other traditional foods. This result indicated that Sunchang gochujang hanjeongsik and Sunchang arirang season table are useful for traditional functional food. Also, it is highly suggested to make a database system about local food and standardization of traditional foods cookery.

• Korean Journal of Food Science and Technology
• /
• v.52 no.6
• /
• pp.565-572
• /
• 2020

The 3-monochloropropane-1,2-diol (3-MCPD) is a contaminant that occurs in foodstuffs in its free form as well as in its bound form. The objective of this study was to evaluate the effects of emulsifier, frying temperature, and the amounts of salt and oil on the formation of bound 3-MCPD in a fried snack model. Emulsifier affected the formation of bound 3-MCPD; furthermore, it was observed that the largest amount of bound 3-MCPD was detected in the fried snack model when glycerin esters of fatty acids were used as emulsifiers. Frying temperature also affected the formation of bound 3-MCPD, which increased significantly as the frying temperature increased from 145 to 190℃. In addition, salt affected the formation of bound 3-MCPD. As the amount of salt increased, the amount of bound 3-MCPD also increased significantly. Moreover, it was observed that the amount of oil did not affect the formation of bound 3-MCPD. These results will aid in the reduction of bound 3-MCPD in fried snacks.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1517-1527
• /
• 2020

This study is about the UV protection effect and water resistance of a multiple emulsion (W/O/W) sunblock cream applied with emotional engineering and reports an actual industrial case. Multiple emulsion system of sunblock cream has the characteristics of changing to a W/O type that is soft and moist when applied, and has excellent water resistance after absorption. Multiple emulsion cream is a highly functional sunblock cream that has both moisture and water resistance. It is a stable milky white cream with a viscosity of 36,000 cps. The organic sunscreen used for the sunscreen was ethylhexylmethoxycinnamate and bisethylhexyloxyphenolmethoxyphenyltriazine. Hexagonal zinc oxide and titanium dioxide that block both UVB and UVA were used. As a result of measuring the UV protection effect by the in-vitro method, the UV protection effect (SPF) is 78.9 for multiple emulsion cream, 76.7 for W/O cream, and 71.3 for O/W cream. It was found that the blocking effect was different. This obtained the highest effect value in the multiple emulsion. As a clinical (in-vivo) result of the UV protection effect, the SPF value representing the UV protection effect of the sunblock cream developed with a multiple emulsion system was 85.7, and the PA-value that blocks the UVA area was 26.5, and ++++. It was found that it has a corresponding high blocking effect. As a result of the water resistance test, the W/O/W formulation had a high waterproofing resistance of 93.8% even after 4 hours, W/O had 75.4%, and O/W had a low water resistance of 25.3%. In the results of the HUT test, it was found in the order of multiple emulsion sun block cream > hydrophilic cream > lipophilic cream. Based on the research results of this multiple emulsion, it is expected to be highly active as a sunblock cream dedicated to outdoor activities by improving the feeling of use, UV protection index, and water resistance. Therefore, in this study, a multiple emulsion system of sunblock cream is developed and has a characteristic that changes to a W/O type that has a soft and moist feeling when applied, and has excellent water resistance after absorption.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.56-65
• /
• 2022

Copper is one of the non-ferrous metals used in the electrical/electronic manufacturing industries due to its superior properties particularly the high conductivity and less resistivity. The effluent generated from the surface finishing process of these industries contains higher copper content which gets discharged in to water bodies directly or indirectly. This causes severe environmental pollution and also results in loss of an important valuable metal. To overcome this issue, continuous R & D activities are going on across the globe in adsorption area with the purpose of finding an efficient, low cost and ecofriendly adsorbent. In view of the above, present investigation was made to compare the performance of a plant root (Datura root powder) as a bio-adsorbent to that of the synthetic one (Tulsion T-42) for copper adsorption from such effluent. Experiments were carried out in batch studies to optimize parameters such as adsorbent dose, contact time, pH, feed concentration, etc. Results of the batch experiments indicate that 0.2 g of Datura root powder and 0.1 g of Tulsion T-42 showed 95% copper adsorption from an initial feed/solution of 100 ppm Cu at pH 4 in contact time of 15 and 30 min, respectively. Adsorption data for both the adsorbents were fitted well to the Freundlich isotherm. Experimental results were also validated with the kinetic model, which showed that the adsorption of copper followed pseudo-second order rate expression for the both adsorbents. Overall result demonstrates that the bio-adsorbent tested has a potential applicability for metal recovery from the waste solutions/effluents of metal finishing units. In view of the requirements of commercial viability and minimal environmental damage there from, Datura root powder being an effective material for metal uptake, may prove to be a feasible adsorbent for copper recovery after the necessary scale-up studies.