• Journal of Korean Society for Atmospheric Environment
• /
• 제19권E2호
• /
• pp.75-81
• /
• 2003

Variational data assimilation, which is recently introduced to the air quality modeling, is a promising tool for obtaining optimal estimates of initial conditions and other important parameters such as emission and deposition rates. In this paper. two advanced techniques for variational data assimilation, based on the adjoint and quasi-inverse methods, are tested for a simple air quality problem. The four-dimensional variational assimilation (4D-Var) requires to run an adjoint model to provide the gradient information in an iterative minimization process, whereas the inverse 3D-Var (I3D-Var) seeks for optimal initial conditions directly by running a quasi -inverse model. For a process with small dissipation, I3D-Vu outperforms 4D-Var in both computing time and accuracy. Hybrid application which combines I3D-Var and standard 4D-Var is also suggested for efficient data assimilation in air quality problems.

• Nuclear Engineering and Technology
• /
• 제49권6호
• /
• pp.1358-1367
• /
• 2017

The data integration with modeled predictions (DIMP) model is a promising inverse radiation transport method for solving the special nuclear material (SNM) holdup problem. Unlike previous methods, DIMP is a completely passive nondestructive assay technique that requires no initial assumptions regarding the source distribution or active measurement time. DIMP predicts the most probable source location and distribution through Bayesian inference and quasi-Newtonian optimization of predicted detector responses (using the adjoint transport solution) with measured responses. DIMP performs well with forward hemispherical collimation and unshielded measurements, but several considerations are required when using narrow-view collimated detectors. DIMP converged well to the correct source distribution as the number of synthetic responses increased. DIMP also performed well for the first experimental validation exercise after applying a collimation factor, and sufficiently reducing the source search volume's extent to prevent the optimizer from getting stuck in local minima. DIMP's simple point detector response function (DRF) is being improved to address coplanar false positive/negative responses, and an angular DRF is being considered for integration with the next version of DIMP to account for highly collimated responses. Overall, DIMP shows promise for solving the SNM holdup inverse problem, especially once an improved optimization algorithm is implemented.

• 한국정밀공학회지
• /
• 제16권8호
• /
• pp.122-129
• /
• 1999

A 5-axis CNC machine tool is more useful compared with a 3-axis machine tool, because the position and the orientation of a tool tip can be controlled simultaneously. Unlike the 3-axis machine tool, the 5-axis machine tool has the volumetric position error and volumetric orientation error due to the quasi-static error of each machine tool joint which is a major source of machined part error. So, the generalized error synthesis model of the 5-axis CNC machine tool was developed to predict and to compensate for the volumetric position error and the volumetric orientation error. It was proposed that a compensation algorithm to correct simultaneously the volumetric position error and the volumetric orientation error of the 5-axis CNC machine by error inverse kinematic.

• Journal of Mechanical Science and Technology
• /
• 제15권9호
• /
• pp.1281-1291
• /
• 2001

The hereditary integral form of a quasi-linear viscoelastic law has been employed. Four new concepts have been employed: 1. a reduced relaxation function with a non-linear exponential function of time, 2. an inverse method to determine the scale factor of the elastic response, 3. an instant elastic recovery strain during unloading, and 4. the results of a constitutive model for cyclic tests may be a function of the Heavyside class. These concepts have been supported by agreement between measured and predicted responses of soft connective tissue to three types of multiple cyclic tests which include rest periods of no extension and alternations between different strain levels. Such agreement has not been attained in the previous studies. Chun and Hubbard (2001) is our companion experimental analysis paper.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권2호
• /
• pp.24-34
• /
• 2000

In this paper we propose a controller design method, called Quasi-LQG/$H_{\infty}$/LTR for nonlinear servo systems with hard nonlinearities such as Coulomb friction, dead-zone. Introducing the RIDF method to model Coulomb friction and dead-zone, the statistically linearized system is built. Then, we consider $H_{\infty}$ performance constraint for the optimization of statistically linearized systems, by replacing a covariance Lyapunov equation into a modified Riccati equation of which solution leads to an upper bound of the LQG performance. As a result, the nonlinear correction term is included in coupled Riccati equation, which is generally very difficult to thave a numerical solution. To solve this problem, we use the modified loop shaping technique and show some analytic proofs on LTR condition. Finally, the Quasi-LQG/$H_{\infty}$/LTR controller for a nonlinear system is synthesized by inverse random input describing function techniques (ITIDF). It is shown that the proposed design method has a better performance robustness to the hard nonlinearity than LQG/$H_{\infty}$/LTR method via simulations and experiments for the timing-belt driving servo system that contains the Coulomb friction and dead-zone.

• Structural Engineering and Mechanics
• /
• 제85권6호
• /
• pp.765-780
• /
• 2023

In this work, a novel combined logarithmic, secant and tangential 2D and quasi-3D refined higher order shear deformation theory is proposed to examine the buckling analysis of simply supported uniform functionally graded plates under uniaxial and biaxial loading. The proposed formulations contain a reduced number of variables compared to others similar solutions. The combined function employed in this study ensures automatically the zero-transverse shear stresses at the free surfaces of the structure. Various models of the material distributions are considered (linear, quadratic, cubic inverse quadratic and power-law). The differentials stability equations are derived via virtual work principle with including the stretching effect. The Navier's approach is applied to solve the governing equations which satisfying the boundary conditions. Several comparative and parametric studies are performed to illustrates the validity and efficacity of the proposed model and the various factors influencing the critical buckling load of thick FG plate.

• 전자공학회논문지A
• /
• 제32A권6호
• /
• pp.67-74
• /
• 1995

This paper proposes the step-stress type-I censoring model for analyzing the data of accelerated life test and reducing the time of accelerated life test. In order to obtain the data of accelerated life test, the step-stress accelerated life test was run with voltage stress to CMOS Hex Buffer. The Weibull distribution, the Inverse-power-law model and Maximum likelihood method were used. The iterative procedure using modified-quasi-linearization method is applied to solve the nonlinear equation. The proposed Weibull step-stress type-I censoring model exactly estimases the life time of units, while reducting the time of accelerated life test and the equipments of test.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.911-914
• /
• 2005

Soft tissue characterization and modeling based on living tissues has been investigated in order to provide a more realistic behavior in a virtual reality based surgical simulation. In this paper, we characterize the nonlinear viscoelastic properties of intra-abdominal organs using the data from in vivo animal experiments and inverse FE parameter estimation algorithm. In the assumptions of quasi-linear-viscoelastic theory, we estimated the nonlinear material parameters to provide a physically based simulation of tissue deformations. To calibrate the parameters to the experimental results, we developed a three dimensional FE model to simulate the forces at the indenter and an optimization program that updates new parameters and runs the simulation iteratively. The comparison between simulation and experimental behavior of pig intra abdominal soft tissue are presented to provide a validness of the tissue model using our approach.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.209-214
• /
• 2004

국내산지사면에서의 토양수분의 시공간적 분포를 파악하기 위하여 TDR(Time Domain Reflectometry)을 이용한 토양수분 장기 모니터링을 실시하였다. 대상사면을 측량하여 DEM(Digital Elevation Model)을 구축하고 흐름분배알고리즘에 적용하여 측정지점을 선정, 역 측량하여 효율적인 측정 체계를 구축하였다. DEM을 통하여 대상산지사면의 지형을 파악, 활용하여 정적 습윤지수(steady-state wetness index), 반동력학적 습윤지수(quasi-dynamic wetness index)를 구하였다. 장기 모니터링을 통한 토양수분 자료를 시공간적으로 분석하고 각각의 습윤 지수의 특징을 분석하고 습윤 지수와 토양수분 실측치와의 유의성과 제한점을 비교 분석하였다.

• 상하수도학회지
• /
• 제22권6호
• /
• pp.657-664
• /
• 2008

This research compared several unsteady friction models for transient analysis of pipeline system. Unsteady friction is an important factor for accurate simulation of hydraulic transient. Steady friction, quasi-steady friction, Zielke's model and two versions of Brunone model were compared with measurement data of identical pipeline conditions. This study showed that the existing simple steady friction model can be useful for the safer design of pipeline system due to its overestimation of waterhammer, but introduction of more elaborate models are required for advanced analysis such as inverse transient analysis of friction or leakage and the preliminary analysis of water quality prediction of water distribution system.