• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.195-197
• /
• 2002

CdTe quantum dots(QDs) were synthesized in aqueous solution by colloidal method. Photoluminescence(PL) spectra of the synthesized CdTe QDs revealed the intensity of PL peaks was stronger as the condensation time was longer. This result was thought because annealing effect by thermal energy transferred during condensation eliminated defects which act as traps and recombination centers in CdTe particle. PL intensity has stron dependence of Te precursor concentration. It confirmed the ratio of Te ion to Cd ion added during synthesis affected the particle size and size distribution of the CdTe QDs. Finally, the synthesized CdTe QDs were identified to be cubic structured CdTe quantum dots by X-ray diffraction(XRD).

• Korean Journal of Materials Research
• /
• v.22 no.3
• /
• pp.140-144
• /
• 2012

Compared with bulk material, quantum dots have received increasing attention due to their fascinating physical properties, including optical and electronic properties, which are due to the quantum confinement effect. Especially, Luminescent CdSe quantum dots have been highly investigated due to their tunable size-dependent photoluminescence across the visible spectrum. They are of great interest for technical applications such as light-emitting devices, lasers, and fluorescent labels. In particular, quantum dot-based light-emitting diodes emit high luminance. Quantum dots have very high luminescence properties because of their absorption coefficient and quantum efficiency, which are higher than those of typical dyes. CdSe quantum dots were synthesized as a function of the synthesis time and synthesis temperature. The photoluminescence properties were found strongly to depend on the reaction time and the temperature due to the core size changing. It was also observed that the photoluminescence intensity is decreased with the synthesis time due to the temperature dependence of the band gap. The wavelength of the synthesized quantum dots was about 550-700 nm and the intensity of the photoluminescence increased about 22~70%. After the CdSe quantum dots were synthesized, the particles were found to have grown until reaching a saturated concentration as time increased. Red shift occurred because of the particle growth. The microstructure and phase developments were measured by transmission electron microscopy (TEM) and X-ray diffractometry (XRD), respectively.

• Journal of Powder Materials
• /
• v.23 no.2
• /
• pp.91-94
• /
• 2016

High-quality colloidal CdSe/ZnS (core/shell) is synthesized using a continuous microreactor. The particle size of the synthesized quantum dots (QDs) is a function of the precursor flow rate; as the precursor flow rate increases, the size of the QDs decreases and the band gap energy increases. The photoluminescence properties are found to depend strongly on the flow rate of the CdSe precursor owing to the change in the core size. In addition, a gradual shift in the maximum luminescent wave (${\lambda}_{max}$) to shorter wavelengths (blue shift) is found owing to the decrease in the QD size in accordance with the quantum confinement effect. The ZnS shell decreases the surface defect concentration of CdSe. It also lowers the thermal energy dissipation by increasing the concentration of recombination. Thus, a relatively high emission and quantum yield occur because of an increase in the optical energy emitted at equal concentration. In addition, the maximum quantum yield is derived for process conditions of 0.35 ml/min and is related to the optimum thickness of the shell material.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.251-252
• /
• 2008

We fabricated silica glass optical fiber containing PbSe quantum-dots (QD) of average size 3.2 nm. The response time of the PbSe-QD doped optical fiber was measured to be around 200 ps. However, after exposure to 1064 nm laser emission for 15 minutes, the response time dramatically reduced to around 2.5 ps, which may be due to photo-darkening effect.

• Journal of the Korean Ceramic Society
• /
• v.33 no.12
• /
• pp.1353-1364
• /
• 1996

Recently semiconductor doped glasses have attracted attention as nonlinear optical materials because of their large third order nonlinear optical properties. The transparent and homogeneous CdS-doped SiO2 glass thin films were obtained by the dip=coating process of the sol-gel method. Thin films were consisted of glasses containing CdS microcrystallites which were formed by dissolved Cd2+ and S2- ions in a SiO2 matrix solutions. A subsequent thermal treatment of this samples led the formation of colloidal agglomerates and finally of microcrystallites. The size of CdS microcrystallites was about 4 to 15 nm after thermal treatments at various heating conditions. From the optical absorption spectra of the CdS-doped SiO2 glass films it was found that the absorption edge was blue-shifted compared with that of the bulk CdS crystal(~2, 4 eV) and that the amount of energy shift was inversely proportional to the crystal size. And the band gap energy increased with the decrease in crystallite size indicating that the quantum size effects occured.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.6
• /
• pp.236-239
• /
• 2002

Si nanocrystallites thin films on P-type (100) Si substrate have been fabricated by pulsed laser deposition using a Nd:YAG laser. After deposition, samples were annealed in several environmental gases ;It the temperature range of 400 to $800^{\circ}C$ Hydrogen passivation was then performed in the forming gas (95 % $N_2$ + 5 % $H_2$) for 1 hr. Strong violet-indigo photoluminescence has been observed at room temperature on nitrogen ambient-annealed Si nanocrystallites. We report the variation of photoluminescence (PL) properties of Si thin films by changing annealing temperatures and by using hydrogen passivation. The results could suggest that the origin of violet-indigo PL should be related to the Quantum size effect of Si nanocrystallite.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.211-211
• /
• 2012

Using spin-polarized density-functional theory calculations, we find that the existence of either Peierls instability or antiferromagnetic spin ordering is sensitive to hydrogen passivation near the step. As hydrogens are covered on the terrace, the dangling bond electrons are localized at the step, leading to step-induced states. We investigate the competition between charge and spin orderings in dangling-bond (DB) wires of increasing lengths fabricated on an H-terminated vicinal Si(001) surface. We find antiferromagnetic (AF) ordering to be energetically much more favorable than charge ordering. The energy preference of AF ordering shrinks in an oscillatory way as the wire length increases. This oscillatory behavior can be interpreted in terms of quantum size effects as the DB electrons fill discrete quantum levels.

• Journal of the Korean Ceramic Society
• /
• v.44 no.2 s.297
• /
• pp.89-92
• /
• 2007

PbSe, with a band gap in the mid-infrared and a samll effective mass, is an interesting material for optical and electrical applications in infrared region. Various colloidal synthetic routes for synthesizing PbSe quantum dot nanoparticles have been developed in the last couple of years. In this work, stable colloidal solutions containing crystalline PbSe particles in the order of 5-15 nm were synthesized using different amount of acetic acid in high boiling coordinating solvents. The size and shape of PbSe nanoparticles was greatly influenced by coexistence of acetic acid in synthetic medium. It was observed by TEM that the shape of PbSe nanoparticles with different amount of acetic acid was changed from spherical to cube or star types.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.489-489
• /
• 2011

The effect of Si quantum dots for solar cell appications was investigated. The 5 ~ 10 nm Si nanoparticle was fabricated on p-type single and poly crystalline wafer by magnetron sputtering and laser irradiation process. Scanning electron microscopy (SEM), atomic force measurement (AFM) and transmission electron microscopy (TEM) images showed that the Si QDs array were clearly embedded in insulating layer ($SiO_2$). Photoluminesence (PL) measurements reliably exhibited bandgap transitions with every size of Si QDs. The photo-current measurements were showed different result with size of QD and number of superlattice.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.10
• /
• pp.864-868
• /
• 2007

Effect of high-temperature annealing on morphology of fully coherent self-assembled InAs quantum dots' grown on Si (100) substrates at $450^{\circ}C$ by atmospheric pressure metalorganic chemical vapor deposition(APMOCVD) was investigated by atomic force microscopy(AFM). When the dots were annealed at 500 - 600$^{\circ}C$ for 15 sec - 60 min, there was no appreciable change in the dot density but the heights of the dots increased along with the reduction in the diameters. In segregation from the InAs quantum dots and/or from the 2-dimensional InAs wetting layer which was not transformed into quantum dots looked responsible for this change in the dot size. However the change rates remained almost same regardless of annealing time and temperature, which may indicate that the morphological change due to thermal annealing is done instantly when the dots are exposed to high temperature annealing.