• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1419-1425
• /
• 2009

Quantity Surveying Profession is a new breed with a history of only less than seven years in S. Korea' s Construction Industry. In this paper, the research aims to investigate the background of the market entrance of this profession in Korean Construction Industry, and the current market direction and future market demands. The research concludes that climate changes in Real Estate markets in relation to Project Financing practices caused by economic crisis of late 1997's, enabled the UK originated QSP sustainable in S. Korea. Moreover it was pointed out that the services of QSP current available in S. Korea's market attributed the different aspect compared to traditional quantity surveying services prevailed in UK. Finally it was apparent that the evolutional direction of the future quantity surveying market in S. Korea is most likely toward multidisciplinary skilled services profession processing not only broader architectural knowledges but cost consciousness, specialty in construction costs and construction contract aspects and transparency in ethical manner.

• 한국잠사곤충학회지
• /
• 제17권2호
• /
• pp.161-170
• /
• 1975

This study is to investigate the content of crude protein intruded in the sericin of cocoon shell and pupa by treatment of buffer solution (pH 1 to pH 13) 20 ml per 1 gram for 30 and 60 minutes at 30$^{\circ}C$, 60$^{\circ}C$ and 100${\pm}$2$^{\circ}C$, respectively. The results obtained are summarized as follows. 1. The quantity of total crude protein obtained from cocoon shell and pupa by treatment during 30 minutes at 30$^{\circ}C$ was dissolved as the largest quantity of 11.874 mg/g at pH 1 and l5.93mg/g at pH 13, but dissolved the smallest quantity 1.75g/g at pH 5 as known. and tile quantity of crude protein treated for 60 minutes is 13.437mg/g at pH 1 and 22.50mg/g at pH 13. Also, the smallest quantity is 2. 813mg/g at pH 5 as known. 2. By the treatment during 30 minutes at 60$^{\circ}C$, the dissolved largest quantity was 13.12mg/g at pH 1 and 21.875 mg/g at pH 13, but the smallest quantity is 2.375mg/g at pH 5 as known After treatment for 60 minutes at 60$^{\circ}C$, the dissolved largest quantity was 17.500 mg/g at pH 1 and 31.56mg/g at pH 13, bu the smallest quantity is 3.849 mg/g at pH 5. 3. The dissolved crude protein from the cocoon shell and pupa by treatment for 30 minutes at 100${\pm}$2$^{\circ}C$ was the largest quantity of 147.000mg/g at pH 1 and 398. 125mg/g at pH 13, but the smallest quantity is 75.00mg/g at pH 5 as known. After treatment for 60 minutes at 100${\pm}$2$^{\circ}C$, the largest quantity was 253.76 mg/g at pH 1 and 460.625mg/g at pH 13, but the smallest quantity is 139.375mg/g at pH 5 as known. 4. The dissolved crude protein from the cocoon shell and pupa was not different in quantity by treatment at 30$^{\circ}C$ or 60$^{\circ}C$. But dissolved crude protein was large quantity from cocoon shell more than pupa, as known. 5. The treatment of cocoon shell and pupa during 60 minutes at 100${\pm}$20$^{\circ}C$ was increased to the dissolved largest quantity of crude protein of 19.20％ at pH 1 and 22. 18％ at pH 13 from the cocoon shell and 6. 12％ at pH, an d 23.87％ at pH 13 from the pupa. But dissolved crude protein was increased to the larger quantity from pupa more than cocoon shell.

• 한국BIM학회 논문집
• /
• 제3권3호
• /
• pp.9-18
• /
• 2013

In case of applying the BIM method in the civil engineering of irregularly shaped structure, BIM method began to be introduced in the current building engineering area compared with the expected effects of the relatively high construction productivity has been recognized. In this paper, I have developed quantity calculation algorithms applying it to earthwork and bridge construction, tunnel construction, retaining wall construction, culvert construction and implemented BIM based 3D-BIM Modeling quantity calculation. Structure work in which errors occurred in range between -6.28% ~ 5.17%. Especially, understanding of the problem and improvement of the existing 2D-CAD based of quantity calculation through rock type quantity calculation error in range of -14.36% ~ 13.07% of earthwork quantity calculation. It's benefit and applicability of BIM method in civil engineering. In addition, routine method for quantity of earthwork has the same error tolerance negligible for that of structure work. But, rock type's quantity calculated as the error appears significantly to the reliability of 2D-based volume calculation shows that the problem could be. Through the estimating quantity of earthwork based 3D-BIM, proposed method has better reliability than routine method. BIM, as well as the design, construction, maintenance levels of information when you consider the benefits of integration, the introduction of BIM design in civil engineering and the possibility of applying for the effectiveness was confirmed. In addition, as the beginning phase of information integration, quantity document automation program has been developed for activation of BIM. And automatically enter the program code number, linkage and manual volume calculation program, quantity document automation programs, such as the development is now underway, and step-by-step procedures and methods are presented.

• 한국CDE학회논문집
• /
• 제20권2호
• /
• pp.182-192
• /
• 2015

In recent years, numerous studies have attempted to extract quantity data by using Building Information Modeling (BIM). In terms of open-BIM based quantity take-off at the early design stage, only few studies were conducted in the field of cost engineering. A lack of compatibility of open BIM for information exchange is postulated as the cause. The Industry Foundation Classes (IFC) extension model has been developed to accommodate the interoperability with quantity take-off software. Improvement of open BIM for quantity take-off needs exchange requirements and model guidelines. For this purpose, the quantity data of IFC models were analyzed using BIM analysis tools. This paper also provides a proposal of requirements on open BIM based quantity take-off at the early design stage. Further this study have been develop the interface system for open BIM based quantity take-off requirements with the results on this study.

• Journal of Advanced Marine Engineering and Technology
• /
• 제5권1호
• /
• pp.28-33
• /
• 1981

The characteristics of typical 35 kinds of domestic anthracites among 155 kinds are studied to find the calculation formula for the required quantity of air and the combustion gas quantity. 1) The author's calculation formulae are as follows: ${A_0}={\frac{1, 000}{1, 064}}{H_1}+0.086(Nm^3/kg)$ ${G_0}={\frac{1, 000}{1, 110}}{H_1}+0.234(Nm^3/kg)$(1) Theoretically required quantity of air (2) Theoretical quantity of combustion gas 2) Theoretical quantity of air in combustion of domestic anthracite is always estimated more with Rosin's formula than author's one in the typical domestic anthracites which have the lower calorific value between 3, 000-8, 000 Kcal/kg and the difference of the calculated quantity of air becomes small, as the calorific value increases. 3) Theoretical quantity of combustion gas is estimated more by author's formula than by Rosin's one with the domestic anthracites which have more calorific value than 6, 700 Kcal/kg and is estimated less in the under range of the above calorific value. 4) Theoretical quantity of required air and quantity of combustion gas of domestic anthracite show ${\pm}$4% difference by Rosin's formulae in comparison with results of actual analysis, and about ${\pm}$1.5% by the author's one.

• 대한한방부인과학회지
• /
• 제18권1호
• /
• pp.242-252
• /
• 2005

Purpose : This study carried out to develop the questionnaires that can measure objectively menstrual quantity and determine quantity index. Method : First, we made questionnaires to measure menstrual quantity by six question. Then we investigated 1309 women's questionnaires who has the menses. Conclusion : 1. the questionnaires that can measure objectively menstrual quantity and determine quantity index was high a correlation coefficient therefore those were used Method of Menstrual Quantity(here after MMQ) calculation. Those were added and averaged. 2. We examined correlation of calculated MMQ and women's questionnaires who has the menses therefore we got 0.30~0.47 correlation. 3. MMQ 1~3(hypomenorrhea) was 39 persons 3.19%, MMQ 4~6(normal menorrhea) was 1050 persons 85.85% and MMQ 7~10(hypermenorrhea) was 134 persons 10.96%. MMQ 4 tended to be little and MMQ 6 tended to be much. 4. MMQ confidence was high as 82% comparatively so we thought MMQ was appropriate as the measured method of menstrual quantity.

• 대한수학교육학회지:수학교육학연구
• /
• 제20권4호
• /
• pp.445-458
• /
• 2010

이 연구는 양 개념의 발달 과정을 알아보고 초등학교에서 양의 계산을 어떤 방식으로 다루는지를 분석함으로써 교육과정이나 교과서의 구성에 대한 시사점을 찾아보려는 것이다. 이산량과 연속량의 이원론에 근거한 유클리드의 수와 양의 구분은 이후 수학자에게 큰 영향을 미치다가 스테빈에 의해 극복되었다. 양의 덧셈과 뺄셈은 오래전부터 시행되어 왔지만, 양의 곱셈과 나눗셈은 수학계에서 될 수 있는 대로 피하려고 하였다. 그러나 자연과학계에서는 전부터 물리량의 계산을 허용하여왔고, 물리량 체계를 모델화한 대수 구조를 만들어 양의 곱셈이나 나눗셈을 이론적으로 정당화하였다. 교육과정과 교과서를 조사해 본 결과 우리나라 초등학교 수학과에서는 다른 나라와 비교하여 양의 계산 지도를 등한시하고 있음이 드러났다. 앞으로 이에 대해 충분한 논의를 하여 우리나라의 교육과정에서도 양에 대해 좀 더 적극적으로 지도할 수 있도록 명시하고, 현재 삭제된 내포량도 수학과에서 다룰 수 있도록 해야 할 것이다. 문장제도 실생활 관련 문제를 많이 제시하여 자연스럽게 양의 계산을 할 수 있도록 해야 하며, 문장제를 해결하는 과정에서 수로 된 식만 쓸 것이 아니라 단위를 붙인 식을 써서 양적인 추론에 도움을 줄 수 있도록 하는 문제에 대해서도 논의할 필요가 있다.

• 한국소음진동공학회논문집
• /
• 제15권5호
• /
• pp.578-585
• /
• 2005

In this paper, we present a schematic method estimating the tracking vibration quantity occurring in the track-following system of an optical recording device. A tracking loop gain adjustment algorithm is introduced to estimate accurately the tracking vibration quantity in spite of the uncertainties of the tracking actuator, Accordingly, the tracking vibration quantity can be estimated from the tracking error, the controller output, the nominal actuator model, and a compensated gain. An optimal tracking controller can be designed from a minimum tracking open-loop gain calculated by the estimated tracking vibration quantity The proposed vibration quantity estimation and controller design method are applied to the track-following system of an optical recording device and are evaluated through the experimental result.

• 산업경영시스템학회지
• /
• 제13권21호
• /
• pp.73-79
• /
• 1990

The quality and cost of manufacturing products is a significant problem in view of duality assurance, but the quality level of the incoming materials is not considered to determine in the economic order quantity of conservative inventory model. A typical situation we face is the difference of quantity between order quantity and the determined outgoing quantity after acceptance inspection. In this paper we present a procedure to reduce the difference of order(ingoing) quantity and outgoing quantity of incoming materials a method of justifying the acceptance plans whether accept or not by comparing with ingoing outgoing quality.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.92-93
• /
• 2019

Estimates based on BIM makes it possible to perform from quantity take-off to construction cost estimates by using model, which is made in the phase of design and construction. As the BIM models are made up of the units of element, there an advantage of the automative quantity take-off, if the correction or change of element occurs. Work items, not included in the elements of the BIM model, are excepted from bill of quantity. Level of detail(LoD) of the BIM model can be improved for detailed estimates, but an excessive modeling for estimates is inefficient. This study presents the measure for selection and quantity take-off of work items, those are not expressed in the BIM model. The proposed method avoids the creation of excessive BIM Models and enables quantity take-off in conjunction with the element.