• Structural Engineering and Mechanics
• /
• v.77 no.2
• /
• pp.179-196
• /
• 2021

Experimental investigations on the seismic behaviors of the PVC-FRP Confined Reinforced Concrete (PFCRC) columns under low cyclic loading are carried out and two variable parameters including CFRP strips spacing and axial compression ratio are considered. The PFCRC column finally fails by bending and is characterized by the crushing of concrete and yielding of the longitudinal reinforcement, and the column with a high axial compression ratio is also accompanied by the cracking of the PVC tube and the fracture of CFRP strips. The hysteretic curves and skeleton curves of the columns are obtained from the experimental data. With the increase of axial compression ratio, the stiffness degradation rate accelerates and the ductility decreases. With the decrease of CFRP strips spacing, the unloading sections of the skeleton curves become steep and the ductility reduces significantly. On the basis of fiber model method, a numerical analysis approach for predicting the skeleton curves of the PFCRC columns is developed. Additionally, a simplified skeleton curve including the elastic stage, strengthening stage and unloading stage is suggested depending on the geometric drawing method. Moreover, the loading and unloading rules of the PFCRC columns are revealed by analyzing the features of the skeleton curves. The quantitative expressions that are used to predict the unloading stiffness of the specimens in each stage are proposed. Eventually, an analytical model for the PFCRC columns under low cyclic loading is established and it agrees well with test data.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.1
• /
• pp.22-31
• /
• 2021

Objective: This review aims to analyze the effects of electromechanically assisted walking in patients with cerebral palsy(CP). Design: A systematic review and meta-analysis. Methods: We reviewed systematically using the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) checklist guidelines. The inclusion criteria for this study were all CP patients. The intervention was electromechanically assisted walking. The outcome measures included gait parameters, function, spasticity. Studies excluded from this review were excluded from the review if they were non-English languages and if the study was not published as a full report, and if they were not randomized controlled trials (RCTs) designs. The RevMan 5.4 program was used to evaluate and explain the results. The risk of bias was evaluated independently by two reviewers. The quantitative meta-analysis, including mean differences (MD) and associated standard deviations (SD) from baseline and follow-up assessments, were recorded. Results: A total of 634 articles were searched. Two hundred eighty-nine duplicate articles were excluded, and 345 of 634 originals were left for selection. Of these 74 papers, 44 were out of topic, and 19 reported no mean or standard deviation values. And one was a non-experimental study. Finally, ten studies were included. All 10 RCTs of electromechanically assisted walking were analyzed. The meta-analysis showed a significant improvement in gait cycle (95% CI (confidence intervals), 0.09 to 0.19, I2=0%), Gross Motor Function Measure (GMFM) D (95% CI, 3.27 to 13.17, I2=0%) and GMFM E (95% CI, 0.22 to 6.41, I2=0%). Conclusions: Electromechanically assisted training helps in walking in patients with CP.

• Journal of Astronomy and Space Sciences
• /
• v.38 no.4
• /
• pp.237-250
• /
• 2021

A rover is a planetary surface exploration device designed to move across the ground on a planet or a planetary-like body. Exploration rovers are increasingly becoming a vital part of the search for scientific evidence and discoveries on a planetary satellite of the Sun, such as the Moon or Mars. Reliable behavior and predictable locomotion of a rover is important. Understanding soil behavior and its interaction with rover wheels-the terramechanics-is of great importance in rover exploration performance. Up to now, many researchers have adopted Bekker's semiempirical model to predict rover wheelsoil interaction, which is based on the assumption that soil is deformable when a pressure is applied to it. Despite this basic assumption of the model, the pressure-sinkage relation is not fully understood, and it continues to present challenges for rover designers. This article presents a new pressure-sinkage model based on dimensional analysis (DA) and results of bevameter tests. DA was applied to the test results in order to propose a new pressure-sinkage model by reducing physical quantitative parameters. As part of the work, a new bevameter was designed and built so that it could be successfully used to obtain a proper pressure-sinkage relation of Korean Lunar Soil Simulant (KLS-1). The new pressure-sinkage model was constructed by using three different sizes of flat plate diameters of the bevameter. The newly proposed model was compared successfully with other models for validation purposes.

• Earthquakes and Structures
• /
• v.20 no.4
• /
• pp.365-375
• /
• 2021

Rammed earth (RE) buildings have existed all over the world for thousands of years, and have gained increasing attention because of its sustainable advantages, however, the shrinkage cracks reduce its bearing capacity and seriously affect its durability and applicability. In this study, the shrinkage cracks test was carried out to investigate the effects of initial water content, proportion of sand and gravel, compaction degree, thickness and the additives (polypropylene fiber, cement and sodium silicate) of shrinkage cracks in RE buildings, ten groups of RE samples were prepared and dried outdoors to crack. Four quantitative parameters of geometrical structure of crack patterns were used to evaluate the development of cracks. The results show that the specimens cracking behavior and the geometrical structure of crack patterns are significantly influenced by these considered factors. The formation of crack can be accelerated with the increase of initial water content and thickness of specimen, while restricted with the increase of the compaction degree and the proportion of sand and gravel. Moreover, the addition of 1% polypropylene fiber, 10% cement and 0.5 volume ratio sodium silicate can significantly restrain the form and development of cracks. In RE construction, these factors should be considered comprehensively to prevent the harm caused by shrinkage cracks. Further works should be carried out to obtain the optimum dosage of the additives, which can benefit the construction of RE buildings in future.

• Journal of Applied Biological Chemistry
• /
• v.65 no.3
• /
• pp.195-202
• /
• 2022

Soybean (Glycine max L.) leaves have been researched as functional food stuff actively, but there is no validation method to control quality of soybean leaves (SL). In this study, we annotated seven kaempferol derivatives to confirm camelliaside A as index metabolite in SL using UHPLC-ESI-TOF-MS. HPLC-UVD validation method of camelliaside A in hot-water extract of SL was established according to validation guideline of functional foods from the Ministry of Food and Safety of Korea. The HPLC-UVD method was validated with reliable parameters for examining specificity, accuracy, precision, limit of detection and quantification and linearity. The established method gave the suitable ranges to qunatitate camelliaside A from the hot-water extract of soybean leaves.

• Journal of Biomedical Engineering Research
• /
• v.42 no.6
• /
• pp.251-258
• /
• 2021

Hyaluronic acid (HA) microspheres (MSs) crosslinked with polyethylene glycol diglycidyl ether (PEGDE) are prepared using a simple fluidic device (SFD) to investigate the optimized parameters. A solution mixture of PEGDE in 2-methyl-1-propanol was prepared as a continuous phase in SFD. HA solutions of 1 wt% concentration were introduced into SFD as a discontinuous phase. The HA solution prepared by stirring for more than 48 h exhibited spherical MSs at the needle tip inside the ring cap. As the flow rate of the continuous phase increased from 0.7 to 1.9 mL/min, the diameter of the MS decreased from 173±36 ㎛ to 129±13 ㎛. Although the PEGDE concentration in the range of 0.2 to 1.8 vol% did not affect the diameter of the MS, the microstructure of MS, consisting of inner hollow void and wall, was changed. The inner void and wall size decreased and increased from 79.5 ㎛ to 57.2 ㎛ and from 10.3 ㎛ to 21.4 ㎛, respectively, with increasing PEGDE concentration from 0.2 vol% to 1.8 vol%. FT-IR peaks located around 2867 cm^-1 and 1088 cm^-1 indicated that the HA MS prepared at different PEGDE concentrations were chemically crosslinked. The HA MSs containing different PEGDE concentrations exhibited quantitative cell viability of more than 98%. L-929 cells adhered well to the HA MSs and proliferated continuously with increasing culture time to 48 h regardless of PEGDE concentration, implying that the HA MSs are clinically safe and effective.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.1
• /
• pp.86-94
• /
• 2023

In this study, a supplementary detail capable of restraining out-of-plane deformation was proposed for steel slit dampers, and a constant amplitude cyclic loading test was performed with the application of the proposed detail and the shape ratio of the damper as variables. Repeated hysteresis and cumulative plastic deformation according to the test results were analyzed. Repeated hysteresis of the slit damper with the proposed detail showed a stable spindle-shaped hysteresis within the set variable range, and no out-of-plane deformation of the damper was observed until ultimate state. It was confirmed that the restraining panel effect through the application of the proposed details is effective in terms of both the strength and deformation capacity of the damper. In addition, experimental parameters for the fatigue curve evaluation of slit dampers were derived in this study. Based on the results, it is judged that quantitative comparison of structural performance with various types of seismic devices will be possible in the future.

• Smart Media Journal
• /
• v.12 no.7
• /
• pp.18-26
• /
• 2023

In this study, we propose a cow behavior recognition system based on YOLOX and OC-SORT. YOLO X detects targets in real-time and provides information on cow location and behavior. The OC-SORT module tracks cows in the video and assigns unique IDs. The quantitative analysis module analyzes the behavior and location information of cows. Experimental results show that our system demonstrates high accuracy and precision in target detection and tracking. The average precision (AP) of YOLOX was 82.2%, the average recall (AR) was 85.5%, the number of parameters was 54.15M, and the computation was 194.16GFLOPs. OC-SORT was able to maintain high-precision real-time target tracking in complex environments and occlusion situations. By analyzing changes in cow movement and frequency of mounting behavior, our system can help more accurately discern the estrus behavior of cows.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.374-374
• /
• 2023

Groundwater is the main source of water on which relies many countries in case of emergency, this is the case of Japan in 2011 after the great Sendai Earthquake. This important resource is found to be heavily influenced by human induced factors such as wetland area reduction. For groundwater sustainable management in perfect cohesion with wetland it is important to understand the relationship between both resources. Wetlands have a strong interaction with both groundwater and surface water, influencing catchment hydrology and water quality. Quantifying groundwater-wetland interactions can help better identify locations for wetlands restoration and/or protection. This study uses observation data from piezometers and wetland to study the qualitative and quantitative aspects of the correlation. Groundwater level, wetland area, chemical, organic and inorganic contaminants are the important parameters used. the results proved that few contaminants in the wetland are found in groundwater and in general the wetland quality does not affect that much groundwater quality. The strong linear relationship found between wetland water level and nearest groundwater level proved that, in term of quantity, groundwater and wetland are strongly correlated. While wetland becoming dry, groundwater level has dropped in the region about 0.52m. The area of wetland was found to be lightly correlated with groundwater level, proving that wetlands dry has contributed to groundwater level declining. This study has showed that whilst rainfall variability contributed to the decline and loss of wetlands, the impacts from landuse changes and groundwater extraction were likely to be significant contributors to the observed losses.

• Clinics in Shoulder and Elbow
• /
• v.26 no.1
• /
• pp.10-19
• /
• 2023

Background: Tendon degeneration contributes to rotator cuff tears; however, its role in postoperative structural integrity is poorly understood. The purpose of this study was to investigate the factors associated with postoperative structural integrity after rotator cuff repair, particularly focusing on the histology of tendons harvested intraoperatively. Methods: A total of 56 patients who underwent primary arthroscopic rotator cuff repair between 2009 and 2011 were analyzed. A 3-mm-diameter sample of supraspinatus tendons was harvested en bloc from each patient after minimal debridement of the torn ends. Tendon degeneration was assessed using seven histological parameters on a semi-quantitative grading scale, and the total degeneration score was calculated. One-year postoperative magnetic resonance imaging was used to classify the patients based on retear. Results: The total degeneration scores in the healed and retear groups were 13.93±2.03 and 14.08±2.23 (P=0.960), respectively. Arthroscopically measured anteroposterior (AP) tear sizes in the healed and retear groups were 24.30±12.35 mm and 36.42±25.23 mm (P=0.026), respectively. Preoperative visual analog scale pain scores at rest in the healed and retear groups were 3.54±2.37 and 5.16±2.16 (P=0.046), respectively. Retraction sizes in the healed and retear groups were 16.02±7.587 mm and 22.33±13.364 mm (P=0.037), respectively. The odds of retear rose by 4.2% for every 1-mm increase in AP tear size (P=0.032). Conclusions: The postoperative structural integrity of the rotator cuff tendon was not affected by tendon degeneration, whereas the arthroscopically measured AP tear size of the rotator cuff tendon was an independent predictor of retear. Level of evidence: III.