• Applied Microscopy
• /
• v.41 no.1
• /
• pp.75-79
• /
• 2011

For quantitative analysis of nano-crystal structure, we reported the accuracy improvement method of lattice parameters measured from electron diffraction. For calculation of Au lattice parameters used as a standard crystal structure, it was considered two different acquisition methods (detector and enegy-filter) and three different calculation methods (conventional, least-square and regression fit). As a result, the measurement reliability could be enhanced by using CCD camera which gives higher performance, while energy-filtering did not affect the improvement the camera constant accuracy. Also, the accuracy of lattice parameters could be improved up to $10^{-4}$ order by regression fitting with correction formula. Finally, it is expected that the combination of regression fitting and intensity extraction from energy-filtered precession electron diffraction gives a solution of quantitative structure analysis for unknown nano-crystals.

• Journal of the Korean Society of Safety
• /
• v.22 no.5
• /
• pp.71-76
• /
• 2007

Failures of equipments for train control systems are linked directly to extensive damages of human lives or financial losses from the increasing uses of train control equipments utilizing computers. Then safety activities for assuring safety and reliability are needed during the system life-cycle. Risk analysis is important phase to increase safety from determining the risk presented by the identified hazard. In this paper, we investigated several methods for risk estimation of safety activities, and then we drew a comparison between original methods to suggest optimized one in the application to train control systems. In the result of the comparison, we had plan to propose the risk analysis method called Best-Practice(BP) risk method combining advantages of the qualitative and the quantitative analysis. In addition, we attempted to apply the BP-risk method to domestic train control systems handling in Korea.

• Hwankyungkyoyuk
• /
• v.22 no.4
• /
• pp.111-133
• /
• 2009

To understand the research trend of environmental education(EE) during last two decades, we analyzed a total of 801 research papers published from 1990 to 2008, 418 research papers from "Hwankyungkyouk" and 393 research papers from "The Journal of Environmental Education(JEE)", respectively. The majority of the authors in both journals majored in EE, followed by authors of science education major in "Hwankyungkyouk" and authors of social science major in JEE. In both journals, more researches were data-collected by quantitative method rather than qualitative method. In particular, the ratio of researches by qualitative method have been dramatically increased since the mid 1990s. The significance test was less used in Korean EE researches than those in JEE. In both journals, more EE researches for elementary and secondary school students were accomplished, which tended to be more salient in Korea. The result of the analysis of 119 EE programs in both journals proposed that EE program needs to be developed more diversely in content as well as in educational method.

• Journal of Information Technology Services
• /
• v.12 no.1
• /
• pp.189-199
• /
• 2013

As many organizations have adopted and implemented ERP systems, concerns about ERP performance also have increased. Former researches studied the ERP implementation of general large or medium size enterprises but there are not enough studies on ERP systems of a specific industry domain. In this paper, we introduce a case study on ERP adoption methodology of global leading company 'D' in shipbuilding and marine engineering industry. We examined ERP implementation background, method and scope and evaluated ERP performance in perspective of both quantitative and qualitative approaches. Quantitative research usually examines ERP performance based on financial statements and qualitative study typically examines organization change or improvement. As a result, ERP implementation in shipbuilding and marine industry can improve quantitative aspects such as cost, human resource and organization performance. As qualitative analysis, business process and tools can be unified and management transparency can be improved by ERP implementation. The result of this paper will be useful guideline for organizations which are considering ERP systems.

• Journal of Biomedical Engineering Research
• /
• v.32 no.4
• /
• pp.328-335
• /
• 2011

For human factor engineering and wearable robot design, the quantitative assessment of physical workload is needed. Through measuring the surface EMG (sEMG) and analysis, the physical workload in overhead lifting posture is presented in quantitative manner. By normalizing sEMG activities with maximal voluntary contraction (MVC), the inter-subject variability is reduced. In all muscles, %MVC increased as the weight of lifting object increases. In anterior deltoid muscle, the %MVC was 3-4 times higher than the other muscles which imply that this muscle performs the major role in the overhead lifting posture. In fatigue analysis, %MVC and the mean frequency in muscle of anterior deltoid changed markedly when compared with other muscles. Through the suggested procedures and analysis, the physical workload for a specific posture can be represented in quantitative way but the clinical meaning for the value should be investigated further.

• Research in Vestibular Science
• /
• v.17 no.4
• /
• pp.130-133
• /
• 2018

There are a number of reports on the pathologies of vestibular disorders. However, these studies included only a few examples, which were not quantitative but merely anecdotal or descriptive. However, a single tissue section may be relevant to a specific disease in multiple ways. The histopathological characteristics of common peripheral vestibulopathies, including benign paroxysmal positional vertigo, $M{\acute{e}}ni{\grave{e}}re^{\prime}s$ syndrome, labyrinthitis, vestibular neuritis, and ototoxicity, have been described. A recent study validated a new quantitative method for determining vestibular otopathology. Detailed quantitative analyses of vestibular pathology are required to obtain a deeper understanding of the vestibular system. Such studies will likely reveal the pathophysiological causes of specific diseases by elucidating the correlations between structural and functional features. Therefore, histopathological studies of vestibular disorders should be performed.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1317-1320
• /
• 1993

We are concerned with developing a robust method for comprehensive scene analysis. In particular, we address the problem of representing spatial relations between regions in a segmented 2D image. Spatial relations are modeled as fuzzy sets. The method has two aspects, symbolic and quantitative, consisting of assigning labels for spatial relations and numeric degrees to which a relation holds respectively. The procedure of deriving a spatial relation is hierarchical taking into account geometric/physical characteristics of the regions in question.

• Archives of design research
• /
• v.13 no.2
• /
• pp.45-53
• /
• 2000

All artists set the arrangement of relative probability subjectively by giving the contrast of color and chroma to give higher probability of some colors in their works and then perform the mechanical assignment. Also the analysis of plastic structure in all areas of design has been made by subjective and qualitative method based on the emotion, intuition and experience of interpreter of design structures and that of color structures was done by the same method. Therefore this study compares and suggests the style characteristics of modern and postmodern design with the object quantitative analysis of color structure by selecting and applying Ilya Chashinik's ceramic dishes as the analysis product of modern design and Jim Melchert's ceramic wall painting as that of postmodern design of 'analysis model of color structure' researched and developed for the quantitative information analysis based on information and communication theory and it is also meaningful in introducing and presenting the analytic procedure and methods centering around quantitative analysis model of color structure analysis.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.106-112
• /
• 2020

Analyzing vitamin D levels is important for monitoring health conditions because vitamin D deficiency is associated with various diseases such as rickets, osteomalacia, cardiovascular disorders and some cancers. However, vitamin D concentration in the blood is very low with optimal level of 75 nmol/L, making quantitative analysis difficult. The objective of this study was to develop a highly sensitive analysis method for vitamin D using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-MS). 25-hydroxyvitamin D (25(OH)D), which has been used as an indicator of vitamin D metabolites in human biofluids was chemically derivatized using a secosteroid signal enhancing tag (SecoSET) with powerful dienophile and permanent positive charge. The SecoSET-derivatized 25(OH)D provided good linearity (R² > 0.99) and sensitivity (limit of quantitation: 11.3 fmol). Chemical derivatization of deuterated 25-hydroxyvitamin D₃ (d₆-25(OH)D3) with SecoSET enabled absolute quantitative analysis using MALDI-MS. The highly sensitive method could be successfully applied into monitoring of quantitative changes of bioactive vitamin D metabolites after treatment with ketoconazole to inhibit 1α-hydroxylase reaction related to vitamin D metabolism in human breast cancer cells. Taken together, we developed a MALDI-MS-based platform that could quantitatively analyze vitamin D metabolites from cell products, blood and other biofluids. This platform may be applied to monitor various diseases associated with vitamin D deficiency such as rickets, osteomalacia and breast cancer.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.4
• /
• pp.307-319
• /
• 2010

As we learned in Daegu subway fire accident, fire in the railway tunnel is prone to develop to large disaster due to the limitation of smoke control and smoke exhaust. In railway tunnel, in order to ensure fire safety, fire prevention and fighting systems are installed by quantitative risk assessment results. Therefore, in this research, developed the program to establish quantitative risk assessment and suggested quantitative safety assessment method including fire scenarios in railway tunnel, fire and evacuation analysis model, fatality estimate model and societal risk criteria. Moreover, this method applys to plan preventing disaster for Honam high speed railway tunnel. As results, we presented the proper distance of escape route and societal risk criteria.