• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2249-2251
• /
• 2001

This paper proposes that it minimizes interference between link at high speed trajectory tracking of 2-degree parallel link manipulator and QFT(Quantitative Feedback Theory) controller which robust structure uncertainty and disturbance of plant. And using ICD(Individual Channel Design), it separates two channel from multivariable system, parallel link manipulator and designs robust controller with applying MISO QFT to each channel. Finally, we make sure of robustness and excellence of QFT controller through simulation and experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.739-740
• /
• 2010

• 융합신호처리학회논문지
• /
• 제2권3호
• /
• pp.57-64
• /
• 2001

본 논문은 시스템의 불확실성과 외란의 불확실성에도 불구하고 원하는 시스템 성능을 만족할 수 있는 강인한 제어기 설계에 대하여 서술한다. QFT(Quantitative Feedback Theory)에 근거한 강인한 제어기 설계과정은 시스템 파라미터 변동과 설계사양을 고려하여 결정되는 템플레이트, 한계조건 그리고 루프형성을 거친다. 설계된 제어기의 성능을 입증하기 위해 파라미터 변동에 매우 민감하고, 비선형성이 강하며 불안정한 특성을 지닌 도립진자시스템에 대하여 적용한다. 설계된 제어기에 대한 시뮬레이션과 실험결과들은 파라메파 변동과 외란에 강인한 제어성능을 보인다.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.562-568
• /
• 1998

During the past three decades, several techniques have been suggested for robust performance design of multivariable systems within the framework of Quantitative Feedback Theory. They are all characterized and limited by the use of loop transmission inversion. A new approach within framework is described which leads to a design tehnique without loop transmission inversion. Complete sequential design algorithms are derived for performance specifications in terms of plant input disturbance, sensitivity, complimentary sensitivity and control effort.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2001년도 하계 학술대회 논문집(KISPS SUMMER CONFERENCE 2001
• /
• pp.97-100
• /
• 2001

본 논문은 2자유도 평행링크 로봇의 고속궤적 추적시 링크간의 간섭을 최소화하고 시스템의 불확실성에도 불구하고 설계사양을 만족하는 제어기 설계방법을 소개한다. 이를 위해 ICD기법으로 평행링크 로봇의 채널을 분리하고 QFT를 이용해서 각 채널의 제어기를 설계한다. 마지막으로 시뮬레이션과 실험을 통해 QFT 제어기의 강인성과 우수성을 확인한다.

• 대한기계학회논문집B
• /
• 제38권2호
• /
• pp.107-114
• /
• 2014

이 연구에서는 Quantitative Feedback Theory(QFT) 기법을 이용한 승용디젤엔진의 커먼레일 압력제어 알고리즘을 제안하였다. 커먼레일 압력모델의 입력과 출력은 각각 Pressure Control Valve(PCV) 구동전류와 커먼레일 압력으로 정의하였고, Metering Unit(MeUn)이 커먼레일 압력에 미치는 영향은 모델 파라미터 불확실성으로 정의하였다. QFT 기법은 이러한 모델의 불확실성에 대하여 강건하면서도 정량적 요구사항을 만족할 수 있는 제어알고리즘 설계방법을 제시한다. 제안된 커먼레일 압력제어기는 목표 레일압력 추종성능과 안정성능이 확보되었으며, 인젝터에 의한 연료분사가 커먼레일 압력에 미치는 영향을 줄이기 위하여 외란제거성능(Disturbance Rejection)이 고려되었다. 설계된 제어 알고리즘은 엔진 동력계 실험을 통하여 검증하였으며, MeUn 구동전류와 연료분사량의 급격한 변화에 따른 제어알고리즘의 강건성과 외란제거성능을 검증하였다.

• 대한기계학회논문집A
• /
• 제31권11호
• /
• pp.1069-1076
• /
• 2007

This paper presents the road simulator control technology for reproducing the road input signal to implement the real road data. The simulator consists of the hydraulic pump, servo valve, hydraulic actuator and its control equipment. The QFT(Quantitative Feedback Theory) is utilized to control the simulator effectively. The control system illustrates a tracking performance of the closed-loop controller with low order transfer function G(s) and pre-filter F(s) for a parametric uncertain model. A force controller is designed to communicate the control signal between simulator and digital controller. Tracking specification is satisfied with upper and lower bound tolerances on the steep response of the system to the reference signal. The efficacy of the QFT force controller is verified through the numerical simulation, in which combined dynamics and actuation of the hydraulic servo system are tested. The simulation results show that the proposed control technique works well under uncertain hydraulic plant system. The conventional software (Labview) is used to make up for the real controller in the real-time basis, and the experimental works show that the proposed algorithm works well for a single road simulator.

• 한국정밀공학회지
• /
• 제18권11호
• /
• pp.107-115
• /
• 2001

Most of rotating machineries supported by contact bearing accompany lowering efficiency, vibration and wear. Moreover, because of vibration, which is occurred in rotating shaft, they have the limits of driving speed and precision. The rotor system has parametric variations or external disturbances such as mass unbalance variations in long operation. Therefore, it is necessary to research about magnetic bearing, which is able to support the shaft without mechanical contact and to control rotor vibration without being affected by external disturbances or parametric changes. Magnetic bearing system in the paper is composed of position sensor, digital controller, actuating amplifier and electromagnet. This paper applied the robust control method using quantitative feedback theory (QFT) to control the magnetic bearing. It also proposed design skill of optimal controller, in case the system has structured uncertainty, unstructured uncertainty and disturbance. Reduction of vibration is verified at critical rotating speed even external disturbance exists. Unbalance response, a serious problem in rotating machinery, is improved by magnetic bearing using QFT algorithm.

• Journal of Information Technology Applications and Management
• /
• 제21권3호
• /
• pp.19-33
• /
• 2014

Crowdsourcing is a popular tool for firms to harness external knowledge and resources. One variation of crowdsourcing entails the use of corporate channels in social network services (SNS) such as Twitter to hold public idea competitions. This study examined the role of feedback interaction between participants of idea competitions. More specifically, the study examined the impact of incentives to provide feedback on other participants' ideas. We found that idea competitions where explicit incentives were introduced to elicit crowdsourced feedback in the form of qualitative comments resulted in improved idea generation performance-with more ideas generated overall, and more ideas generated through participant collaborations, through increased comment-posting activities. Based on the findings, implications for theory and practice are discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.428-432
• /
• 2003

Quantitative Feedback Theory (QFT) is one of most effective methods of robust controller design and can be considered as a suitable method for systems with parametric uncertainties. Particularly it allows us to obtain controllers less conservative than other methods like $H_{\infty}$ and ${\mu}$-synthesis. In QFT method, we transform all the uncertainties and desired specifications to some boundaries in Nichols chart and then we have to find the nominal loop transfer function such that satisfies the boundaries and has the minimum high frequency gain. The major drawback of the QFT method is that there is no effective and useful method for finding this nominal loop transfer function. The usual approach to this problem involves loop-shaping in the Nichols chart by manipulating the poles and zeros of the nominal loop transfer function. This process now aided by recently developed computer aided design tools proceeds by trial and error and its success often depends heavily on the experience of the loop-shaper. Thus for the novice and First time QFT user, there is a genuine need for an automatic loop-shaping tool to generate a first-cut solution. In this paper, we approach the automatic QFT loop-shaping problem by using an algorithm involving Linear Programming (LP) techniques and Genetic Algorithm (GA).