• Journal of Advanced Technology Convergence
• /
• v.2 no.4
• /
• pp.1-6
• /
• 2023

Research on power inductor surface UV printing equipment using cylindrical magnets can prevent damage to quality consumable materials (making plates, Squeegees) during printing and improve printing quality by applying technology to prevent product from flipping or standing up when fixing the product by making the magnetic formation of cylindrical magnets form up and down. The development of cylindrical magnets that changed the direction of magnetic force will stabilize the fixing method for metal products made by powder compression, increasing the production capacity for small products. Finally, by studying the power inductor surface UV printing device using cylindrical magnets, it can be differentiated from the spray and deeping methods that were being worked on, production will be greatly improved, and as a result, cost reduction and competitive production will be possible.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2004.04a
• /
• pp.298-301
• /
• 2004

European Union Member States shall ensure that, from 1 July 2006, new electrical and electronic equipment put on the market does not contain mercury, cadmium, lead, hexavalent chromium, polybrominated biphenyls(PBB) or polybrominated diphenyl ethers(PBDE) (by Directive 2002/95/EC of The European Parliament and the Council of 27 january, 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment ). So, It is important to develop lead free solder and to assure the reliability of appliance. But lead free solder(i.e. Sn-3Ag-0.5Cu) have some problems such as lift off, whisker, migration and crack, etc. In this paper we discuss the reliability assurance method in lead free solder and appliance.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.5
• /
• pp.497-519
• /
• 2003

Science and technology is an essential ingredient of the progress in modern society. Measurements enable action and actions enable results. Non-Destructive Evaluation (NDE) - the science and technology of measurements without affecting the Properties and performance of the test object is an interdisciplinary domain area of high significance far ensuring quality, productivity and safety thus enabling better qualify of lift to the inhabitants on this planet. The test object can be material, component, plant, earth, environment etc. Total qualify management, total productivity management, concurrent engineering and many other essential ingredients of success in plant engineering and manufacturing industry are dependent on NDE far success and good returns on investments.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.143-147
• /
• 2004

In this paper, effect of TiN-coating on product quality such as dimensional accuracy and surface roughness is experimentally investigated. A punch of SKD11 material in cold forging of an automotive bearing shaft and its related process found in a cold forging company ate selected as the test example. The effect of TiN-coating is revealed in a quantitative manner. It is to be noted that TiN-coating is effective in controlling the dimensional accuracy and surface roughness as well as in increasing tool lift.

• Journal of Korean Society for Quality Management
• /
• v.23 no.1
• /
• pp.15-28
• /
• 1995

We consider a step-stress life testing which is devised for a two-component parallel system with considerably long life time. To describe such a system, we use an exponential distribution as the survival function. The lift distribution is assumed between the log mean life time and the stress with the cumulative exposure model. The criterion for optimality is to minimize the sum of the variances of the maximum likelihood estimators of the mean life times of each part under the normal stress.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.454-462
• /
• 2014

This study was carried out to determine the effect of tree height on light transmission, spray penetration, tree growth performance, fruit quality attributes, and labor productivity in the slender-spindle system of 'Hongro'/M.9 apple trees. With increasing tree height, the light penetration into the internal parts of the canopy decreased, especially in the lower canopy. Leaf area index (LAI) increased with increasing tree height, thereby leading to a reduction in the extent of spray penetration into the interior of the canopy. With increasing tree height, shoot growth was more vigorous but produced slender shoots in the upper canopy compared to the lower canopy. Although the soluble solid content and coloration of fruit decreased, there was no difference in fruit firmness and acidity. In addition, the number of final fruit set increased, although the production of large fruit (> 305 g) decreased. The increase in tree height also significantly increased the labor required for practices such as thinning of flowers and fruits, pruning, and harvesting. Nevertheless, this problem of increased in labor input in taller trees would was eased by use of a mechanical lift. Utilizing a lift for thinning the flowers of trees 4.5 m in height saved 14.6 min per tree, compared to the use of ladder. Therefore, it is highly considerable that in order to enhance light transmission and fruit coloration, light conditions should be improved in the internal tree canopy of slender-spindle systems.

• Electrical & Electronic Materials
• /
• v.8 no.5
• /
• pp.633-639
• /
• 1995

Dropouts in magnetic media are a primary quality deficiency which is detrimental to magnetic signal quality and thus the major impediment to error-free recording, especially in high density digital recorders. The specific form of defects and causes found to be responsible for signal dropouts occurring in magnetic tape were studied. Dropout occurred when the RF signal falls to low level due to the various types of surface defects. However, the fall in the level of the RF signal in gravure roll coated tapes was most often caused by foreign particles adhering to the magnetic tape. It was also shown from the present study that scattered particles trapped under the tape surface or put on the top can lift it as it crosses the head, creating a spherical tent shaped defect and causing a temporary signal drop. Dropout producing substances were identified through optical and microchemical analyses. The results were correlated with measured electrical signal losses combined with analytical microscopy to clarify source identification of defects.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.19 no.2
• /
• pp.212-222
• /
• 2006

Backgroun : Tinnitus is common disorder with many possible causes and a symptom of many different diseases but has no effective treatment. Approximately 20% of tinnitus patients experience the disorder to a degree that their quality of lift and productivity are impaired. Objective : This study was conducted to investigate the characteristic of the tinnitus patients and the impact of tinnitus on quality of life. Methods : 103 patients un recruited in this study who was ill with tinnitus. They wrote out the queslicumaire about tinnitus and the Tinnitus Handicap Inventory(THI). Result : THI score have relation to set the period of birth, the loudness of tinnitus and the items of attending symptoms. Conclusion In this study, tinnitus have influence on patients' quality of life. We expect this study to provide the base data for the effective treatment and the high qualify of patients' life.

• Fisheries and Aquatic Sciences
• /
• v.5 no.3
• /
• pp.245-250
• /
• 2002

This study was conducted to compare the quality among commercial boiled-dried anchovies caught by different methods. Regardless of catch methods, the moisture, salinity and acid-insoluble ash contents of commercial boiled-dried anchovies ranged from $23.2-25.2\%,\;6.8-7.4\%$. and $0.32-0.46\%$, respectively. By sensory evaluation, these anchovies were less than $5\%$ in break-age, whitish or yellowish in color and had a foul smell. Judging from the above results and Korean Standards (KS) for foods, these anchovies were classified into special grade. There was no difference in total amino acid content. While, in a major mineral content, boiled-dried anchovy caught by set net (BA-SN) was the highest, and those caught by lift net (BA-LN) and tow net (BA-TN) followed in order. The lipid oxidation progressed at the slowest rate in the BA-SN, and then no difference in the lipid oxidation was found between the BA-LN and BA-TN. Judging from the results of chemical analysis and sensory evaluation, the BA-TN was the worst quality among the commercial boiled-dried anchovies. No difference in quality was found between the BA-LN and the BA-SN.

• Research in Community and Public Health Nursing
• /
• v.8 no.1
• /
• pp.31-44
• /
• 1997

The purpose of this study was to measure and determine the relationship of femoral neck and lumbar bone mineral density with their and related factors. It were measured and determined the relationships among bone mineral density, bone mineral content in the lumbar and femoral neck, muscle strength (arm, back, leg), muscle endurance, instrumental activity of daily living (IADL), quality of life, cognitive perceptual variables(self efficacy, perceived health status), age, age at menopausal period. The twenty five subjects participating in this study consisted of twelve males and thirteen females at a C-institution in Chung Buk province. The mean age of subjects was 73.64 years. The data was collected from August, 1993 to September, 1993. The data was analyzed with $x^2-test$, t-test, Correlation, multiple regression using a SPSS pc+ program. 1. The mean femoral neck bone mineral density was $0.636g/cm^2$, 66.7% of young bone mineral density, the mean lumbar($L_2-L_4$) bone mineral density was $0.807g/cm^2$, 79.86% of young bone mineral density. The mean fermoral neck bone mineral content was 2.906g and the mean lumbar bone mineral content was 36.898g. 2. The mean muscle strength was 17.14kg(grip strength), 32.05kg(back lift strength), 17.14kg (leg lift strength) and the mean muscle endurance was 9.92times. 3. Men showed a significantly higher score (p<0.01) in muscle strength and muscle endurance than women, as well as a significantly higher score on self efficacy and perceived health status(p<0.05). 4. The femur neck bone mineral density had a significant correlation(p<0.0l) with leg lift strength, back lift strength, and their was a significant correlations (p<0.05) with arm strength and muscle endurance. Lumbar ($L_2-L_2$) bone mineral density had a significant correlation(p<0.05) with muscle endurance, grip strength and IADL. 5. With the multiple regression analysis the most significant predictor for lumbar bone mineral density were IADL, the most significant predictor for femoral neck bone mineral density was leg strength. This study concluded: As the mean bone mineral density and bone mineral content were low, the aged showed osteopenia. Bone mineral density, muscle strength and IADL were correlated. The aged could pro mote muscle strength, bone mineral density and IADL through Leg Press exercise which was safe and efficient for the aged. This Leg Press exercise contributed to prevention of osteoporosis and promoted the health of the aged.