• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.12
• /
• pp.24-30
• /
• 2010

In recent memories, repair is an unavoidable method to maintain its yield and quality. The probability of defect occurence on spare lines has been increased through the growth of the density of recent memories with 2 dimensional spare architecture. In this paper, a new analysis region virtualization scheme is proposed. the analysis region virtualization scheme can be applied with any BIRA (built-in redundancy analysis) algorithms without the loss of their repair rates. The analysis region virtualization scheme can be a viable solution for BIRA considering the faulty spare lines of the future high density memories.

• KIEAE Journal
• /
• v.11 no.1
• /
• pp.9-14
• /
• 2011

Currently, the multi-residential apartments used in Korea are mostly bearing wall apartments which don't satisfy consumers for the lack of architectural plan flexibility. And due to remodelling-incompatible, bearing wall apartments have to be reconstructed. It is, thus, necessary to develop multi-residential apartments utilizing composite beam that can replace the conventional bearing wall-type apartment buildings. Composite beams proposed in this paper ensure modification of space and quality control, while the floor heights are maintained at the same floor height as in bearing wall structures. This study analyzes the experimental behavior of composite beams with proper combination of structural steel, reinforced concrete, and precast concrete. By comparing with the theoretical analysis and experimental results, the accuracy of flexural moment capacity and neutral axis was evaluated. The experiments were performed by two simply-supported specimens using loading and unloading. When the analysis results were compared with the experimental results, the flexural moment capacity of the composite beam was shown with an error of approximately -0.5 to 0.1% at the maximum load limit state.

• KIEAE Journal
• /
• v.9 no.2
• /
• pp.99-106
• /
• 2009

The noise in apartment buildings are major factor that determine the quality of indoor noise environment. Particularly, the noise from children's running footsteps and plumbing noise have caused the residents who live in decrepit apartment houses to uncomfortable environment. And as time go by, sound performance are getting worse according to the aging of the facilities. So this study deals with the plans to improve the sound performance of decrepit apartment house. To compare the noise reduction, we measured the heavy-weight impact sound level and plumbing noise level before and after changes the measurement conditions. As the results of measurements, the heavy-weight impact sound level were decreased when stiffness reinforcement were installed on slab. Especially the sound level were decreased 2.1-7.6dB in 50-80Hz of low frequency range. Instead of PVC pipe system, cast iron pipe and triple elbow drain pipe systems were installed. Noise level were decreased 15dB(A) in 250Hz. Noise level of pipe system's on the slab is less than under slab one. On the contrary water saving stool showed increasing the noise level.

• Composites Research
• /
• v.12 no.6
• /
• pp.43-52
• /
• 1999

This paper explains the development of a concurrent engineering system for the rlesign of composite structures. The concurrent engineering system is developed to meet the demand for the better quality products with lower production cost and time. In this study, to compose the architecture of concurrent engineering system, the commercial and noncommercial programs related to design and analysis of composite structures are surveyed and classified. The concurrent engineering system is including various design modules such as design/analysis of composite structures using CLPT and FEM, buckling and post bucking analysis, thermo-elastic analysis of carbon-carbon composite, and optimum design using expert system and genetic algorithm. For the integration and management of softwares, the concurrent engineering system is realized by Microsoft visual $C++{^\circledR}$ that provide multi-tasking and graphic user interface environment.

• KIEAE Journal
• /
• v.13 no.2
• /
• pp.101-106
• /
• 2013

As the number of aged people increase, hospitals specializing in elderly cares have also increased very rapidly. Therefore it is necessary to improve the quality of these hospitals for the elderly people in order to enhance the function of these hospitals not only for conventional treatment but also for recovery and convalescence. To study such trend and needs, this study researched on planning for Elderly Hospital's Atrium that provides a space for the elderly people so that they may enjoy the natural environment while being supported from diverse aspects for long term cares and sustained living, and tried to find out design solutions based on users' demand through questionnaire survey and interviews both with the management of the elderly hospital and the inpatients or the users. As a result of this study, it was revealed that each user showed his or her own respective characteristics concerning his or her expectation about the environment of their using spaces, and according to this result the strategic direction and design plan could be drawn. Based on plans for this Elderly Hospital's Atrium specializing in cares for the elderly people, useful information will be provided for caring, treatment and recovering environment of the elderly hospitals in future considering not only the conventional medical and technical services but also the inpatients' or the users' physical, psychological and social factors.

• KIEAE Journal
• /
• v.8 no.1
• /
• pp.45-52
• /
• 2008

Daylighting systems can improve the luminous quality of indoor environment and reduce the building's electric lighting energy consumption. For designing good daylighting, place the light where it is desired and avoid excessive contrasts, glare and high light levels. Sun scoop, light scoop and sun catcher systems have been used for alternative systems compared to other natural lighting systems. This study aims to evaluate daylighting performance of sun scoop, light scoop and sun catcher systems using scale model experiments. For the purpose, the 1/10 scale models of the systems were made as the same areas of glazing(10 percent of floor area) on the top of the center roof. Totally 15 measuring points of illuminance on the horizontal work plane were monitored from 09:30 to 12:30 on October 29, 2007. Agilent data logger and photometric sensors Li-cor were used. As the results, the topside lighting systems can improve the illumination uniformity than side lighting and top lighting. However, the appropriated shading system should be integrated to prevent the direct sunlight.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.3
• /
• pp.105-110
• /
• 2017

Underfloor air distribution (UFAD) is an air distribution strategy for providing ventilation and space conditioning in buildings. UFAD systems use the underfloor plenum beneath a raised access floor to provide conditioned air through floor diffusers that create a vertical thermal stratification during cooling operations. Thermal stratification has significant effects on energy, indoor air quality, and thermal comfort performance. The purpose of this study was to characterize the influence of a linear bar grille diffuser on thermal stratification in both interior and perimeter zones by developing Gamma-Phi based prediction models. Forty-eight simulations were carried out using a Computational Fluid Dynamics (CFD) technique. The number of diffusers, the air flow supply, internal heat gains, and solar radiations varied among the different cases. Models to predict temperature stratification for the tested linear bar grille diffuser have been developed, which can be directly implemented into dynamic whole-building simulation software such as EnergyPlus.

• KIEAE Journal
• /
• v.10 no.6
• /
• pp.55-66
• /
• 2010

The government is enacted "Housing Performance Grading Indication System" from qualitative housing supply policy and performance of housing under the background of looking for new plan to secure good housing stock and housing performance. This system consists of 5 main performance section, 14 performance categories and 20 detailed performance items. 5 main performance parts are sound insulation related grading(Light-weight impact sound insulation, heavy-weight floor impact sound insulation, noise emission in bathroom, airborne sound insulation for wall between units), Long-life housing related grading(flexibility, remodeling & maintenance, durability), environment related grading(landscape, indoor air quality and ventilation, energy performance), Living environment related grading(common resident facilities such as playground and consideration for the socially underprivileged such as the aged), Fire fire prevention grading(fire fire prevention). The purpose of this research is to analyze characteristics and assessment results of 20 detailed performance items on "Housing Performance Grading Indication System" which was enforced 240 cases from Jan 9th, 2006 to Sep 30th, 2010. The analysis of approval condition of detailed performance items will be important comments for understanding the current domestic level and development of technology.

• KIEAE Journal
• /
• v.2 no.3
• /
• pp.25-32
• /
• 2002

The demand for water in a city area has enormously increased due to the concentration of population and improvement of the living quality. In this reason, the water shortage and the pollution by city sewage seem to be inevitable. For saving city water and meeting the demands from the city, the wastewater recycling system can be used, which makes used water reusable by a certain purification process. In Korea, the application of a wastewater recycling system to the buildings has continuously been adopted since its first appearance at the Lotte World Complex in 1989. However, the system has not been in fashion because of its high cost and users' negative attitude against recycled water. A research based on literature review and a case study for a recycling water system was carried out and an estimation and evaluation model was proposed. The results from the present study suggest that the optimal size of the recycling water system should be designed within 30-40% of total water demand in a building. Also, it was found that economic benefits could be expected within the payback period of 5.3 years by securing the operation rate over 70%.

• KIEAE Journal
• /
• v.10 no.1
• /
• pp.97-107
• /
• 2010

Although aspiration towards quality of life and holistic health has been growing faster in our modern society and the affordance of health in built environment has been more acknowledged, there has been hardly any development on built environment planning and design theory that can be comfortably and confidently used in creating built environment to promote holistic health. Thereby, this study sets out to experimently formulate a composite theory that explains the relationship between health and built environment. The main methodology of this study is literature review and analysis. Theories that have been applied in other similar fields were chosen to be analyzed by health related perspectives and graft those theories onto holistic health viewpoints to compose a comprehensive theory. Selected theories that were considered useful to be analyzed were Lawton's Environment Press Theory, Carp & Carp's Complementary & Congruence Theory, Valins' Activity-based Design Criteria Theory, Atchley's Continuity Theory, Murtha & Lee's User Benefit Criteria Theory, and Alexander's Pattern Language Theory. Characteristics of these theories were compared by their abstractness and concreteness, and the range of application, and analyzed by a holistic health perspective. Then, these theories were comprehensively structuralized and synthesized as a built environment for health theory. This study has its significance in providing a base to develop healthy built environment research further as it introduced a conceptual framework which explains spatial elements in the health functionality point of view.