• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.1
• /
• pp.67-72
• /
• 2006

This study is on the development of algorithm of surge test for quality control on electrical parts of throttle body in automobiles with internal combustion engine, not only to know its condition to be good or not, but also jugding its condition to be classified into six types. To know whether its condition to be good or not, comparing and analyzing between two waveforms generated from master and test coil of throttle body. If test net area is below 20% of master area, the condition of test coil is good. By analyzing test coil waveform to master coil waveform, the condition of test coil into winding badness, insulation badness, layer and corona discharge, short badness should known. Therefore quality control system on electrical parts of throttle body should be developed.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.20 no.3
• /
• pp.71-76
• /
• 2014

Master packaging system is a technology combining primary and secondary packaging to preserve the fresh produce in the supply chain. Master packaging system with tailor-designed gas transfer and $CO_2$ absorber of $Ca(OH)_2$ was applied to fresh shiitake mushroom in its supply from farm to retail store. The temperature, humidity and package atmosphere were monitored through the distribution and/or storage until the packages were opened to measure the mushroom quality. Conventional perforated individual packages without secondary master pack were prepared and travelled the same path for comparison purpose. While high temperature history was observed in some initial period of actual practice of the mushroom transportation and storage unexpectedly, the package atmosphere around the produce in the master packaging system was maintained at modified atmosphere consisting of $O_2$ concentration of 0.4 to 4.2% and $CO_2$ concentration of 0.7 to 1.7%, which is known to be beneficial for the mushroom preservation. While curing the mushrooms with precooled drying was effective for quality preservation, positive effect of master packaging system could be apparent for the uncured mushroom. Harmonized combination of curing treatment, master packaging system and temperature management was suggested for the best quality preservation of the fresh shiitake mushroom.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2014

Properly designed plastic packages of fresh produce can preserve the quality by maintaining the optimal modified atmosphere (MA) at optimal low temperature conditions, but cannot do so at temperature abuse conditions in retail stage due to occurrence of injurious package atmosphere coming from imbalance between respiration and package gas permeation. Master packaging system consisting of a double-layered secondary package wrapping several individual (primary) packages has been proposed and applied recently to the commodities of sweet persimmon, king oyster mushroom, chestnut and strawberry. The master (secondary) pack is designed to be stored and distributed under chilled temperature, and then dismantled when moved to the retail display from the presale chilled storage. The master packaging system taking into consideration temperature dependence of produce respiration and package gas transfer was looked into with examination of its design variables to maintain the beneficial MA. Mathematical model was provided to help the design of master packaging system creating the desired MA. Its benefits of quality preservation and its limitations in practices of fresh produce marketing were discussed. Further research direction to extend the applicability of the produce master packaging system was presented.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.2
• /
• pp.170-176
• /
• 2016

PLM system has been widely used in whole industry. Specially, in case of the company that constructs the engineering plant, PLM can be a key success tool for the innovation with ERP and Enterprise IT Systems. This paper describes the innovation strategy for engineering plant PLM including Master Data management, EPC project management, full 3D modeling and quality management.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.4
• /
• pp.66-76
• /
• 2008

In medium-sized enterprises that comprise of multiple business branches and companies, various types of information systems are constructed and operated. One of the difficult problems these enterprises face is that integrated information cannot be delivered due to loosely managed mater data. This paper proposes an effective master data management framework for these enterprises. The framework is designed after comparing a tightly controlled centralization model with a coordinated centralization model. Through a case study on a customer master data integration project, the practicality of the framework is explored.

• Industry Promotion Research
• /
• v.2 no.2
• /
• pp.45-52
• /
• 2017

this study, the problem of the quality is analyzed by questionnaire analysis of the current quality managers, and the German meister system, the Japanese name deduction system, the functional manager, and the quality manager system. First, we set up a quality guide selection classification guide model. Secondly, we set up a model for combining experience and expertise with theory. Third, we set up a quality brand application model to enhance competitiveness of SMEs. Fourth, The basic model is presented. The expected effects of these models are that, in the knowledge-based economy, in terms of identifying, fostering, and utilizing superior talents, quality experts combine academic theories and experience in each field to provide core expertise and knowledge, As a transformative leader and expert, we will become a leader of innovation activities by enhancing corporate competitiveness, developing younger leaders, and cooperating with suppliers. In order to strengthen competitiveness of SMEs, It will be possible to scale and cultivate the technology of SMEs.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.10 no.2
• /
• pp.113-118
• /
• 2010

This paper proposed an ECAM (Electronic cam) control system which has simple and general structure. The proposed cam controller adopted the linear and polynomial curve-fitting method to generates a smooth cam profile curve function. Smooth motion trajectory of master actuator guarantees the good performance of slave motion and has an important effect on the interpolation quality of ECAM. The auto-tuning PID velocity controller was applied to overcome the uncertainties in ECAM, and the gains of the controller are updated continuously to ensure the consistency of system performance under varying working conditions. The robustness of system against the varying load torque disturbances and noises is guaranteed by using the load torque disturbance observer to suppress the disturbance on master actuator. The velocity compensator was applied to compensate the degradation of performance of slave motion caused from the varying driving speed of master motion. The stability and validity of the proposed ECAM control system was verified by simulation results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1776-1786
• /
• 2010

Intelligent distribution automation system have total monitoring and control capability. The system covers substation, distribution network, distributed generations and customers at HV system. Various intelligent distribution facilities installed at distribution systems have voltage sensor, current sensor, aging monitoring sensor. Intelligent Feeder Remote Terminal Unit (IFRTU) tied to intelligent distribution facilities process information from facilities and it checks information of fault, power quality and aging of distribution facilities. The information is transmitted to master station through communication line. The master station have remote monitoring system covers substation, distribution network, distributed generations and customers. It also have various application programs that maintain optimal network operation by using information from on-site devices.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.3
• /
• pp.402-408
• /
• 2016

Master packaging system consists of an inner individual package and secondary outer package. During the stages of chilled transport and distribution, the combination of primary individual package and secondary package was used to maintain a modified atmosphere for shiitake mushrooms. During the retail stage at higher temperature ($25^{\circ}C$), the primary individual package was exposed to display conditions after dismantling of the secondary packaging. The master packaging system was constructed to contain eight individual $30-{\mu}m$ thick polypropylene film bags of 500 g shiitake mushrooms inside a $40-{\mu}m$ low-density polyethylene bag. Carbon dioxide absorbent material [$Ca(OH)_2$] and/or moisture absorbent (superabsorbent polymer) were designed in their required amounts based on respiration characteristics and then applied to the outer secondary packaging in sachet form. Gas concentration of the packaging, temperature, and humidity were monitored throughout transport and storage. The quality of shiitake mushrooms was measured at the retail stage to determine the packaging effect. During the distribution stage of 108 h, $O_2$ and $CO_2$ concentrations in the master packaging system were maintained at 9~11% and 1~4% in the inner packaging, respectively, which are good for quality preservation. Compared to the control, the master packaging with $CO_2$ and/or moisture absorbents improved mushroom preservation and particularly reduced decay.

• Korean Journal of Comparative Education
• /
• v.27 no.1
• /
• pp.123-144
• /
• 2017

The purpose of the study was to analyze American teacher quality management system and provide it's implications. For this, the study analyzed the main traits of American teacher policy, Pennsylvania State University's teacher cultivation system, Pennsylvania State's teacher certification, selection, and recruit system, the master teacher system of New Jersey and New York State. The main results are as the followings. First, American teacher policy is variously operated by state government and school district based on variety and autonomy. Second, for teacher cultivation in American teacher policy, the evaluation on the teacher cultivation program of teacher cultivation institute(mainly university) is strictly administrated. Third, for teacher certification, various tests for gaining teacher certificate are administered and standardized tests are used for the tests. Fourth, for teacher selection and recruit, there is no special test for selection and teacher recruit is done by contract. Fifth, for quality management using excellent teacher, America is administering master teacher that is similar with master teacher system in Korea. Finally, the innovation of teacher cultivation institute by introducing Every Student Succeeds Act(ESSA) is anticipated. Based on these results, the implications for Korean teacher policy were provided.