• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권1호
• /
• pp.414-435
• /
• 2017

As network adaptive streaming technology becomes increasingly common, transport protocol also becomes important in guaranteeing the quality of multimedia streaming. At the same time, because of the appearance of high-quality video such as Ultra High Definition (UHD), preventing buffering as well as preserving high quality while deploying a streaming service becomes important. The Internet Engineering Task Force recently published Multipath TCP (MPTCP). MPTCP improves the maximum transmission rate by simultaneously transmitting data over different paths with multiple TCP subflows. However, MPTCP cannot preserve high quality, because the MPTCP subflows slowly increase the transmission rate, and upon detecting a packet loss, drastically halve the transmission rate. In this paper, we propose a new multipath congestion control scheme for high-quality multimedia streaming. The proposed scheme preserves high quality of video by adaptively adjusting the increasing parameter of subflows according to the network status. The proposed scheme also increases network efficiency by providing load balancing and stability, and by supporting fairness with single-flow congestion control schemes.

• 품질경영학회지
• /
• 제27권2호
• /
• pp.126-142
• /
• 1999

Robust design is an approach to reducing performance variation of quality characteristic values in quality engineering. Taguchi has an idea that mean and variation are handled simultaneously to reduce the expected loss in products and processes. Taguchi parameter design has a great deal of advantages but it also has some disadvantages. The various research efforts aimed at developing alternative methods. In the Taguchi parameter design, the product-array approach using orthogonal arrays is mainly used. However, it often requires an excessive number of experiments. An alternative approach, which is called the combined-array approach, was suggested by Welch et. al. ( 1990) and studied by others. In these studies, only single quality characteristic was considered. In this paper we propose how to simultaneously optimize multiple quality characteristics using desirability function when we used the combined-array approach to assign control and noise factors. An example is illustrated to show the difference between the Taguchi's product-array approach and the combined-array approach.

• International Journal of Quality Innovation
• /
• 제6권1호
• /
• pp.109-118
• /
• 2005

The parameter design is the most emphasized measure by researchers for a new products development. It is critical for makers to achieve simultaneously in both the time-to-market production and the quality enhancement. However, there are difficulties in practical application, such as (1) complexity and nonlinear relationships co-existed among the system's inputs, outputs and control parameters, (2) interactions occurred among parameters, (3) where the adjustment factors of Taguchi's two-phase optimization procedure cannot be sure to exist in practice, and (4) for some reasons, the data became lost or were never available. For these incomplete data, the Taguchi methods cannot treat them well. Neural networks have a learning capability of fault tolerance and model free characteristics. These characteristics support the neural networks as a competitive tool in processing multivariable input-output implementation. The successful fields include diagnostics, robotics, scheduling, decision-making, prediction, etc. This research is a case study of spherical annealing model. In the beginning, an original model is used to pre-fix a model of parameter design. Then neural networks are introduced to achieve another model. Study results showed both of them could perform the highest spherical level of quality.

• 통합자연과학논문집
• /
• 제13권3호
• /
• pp.92-96
• /
• 2020

Taguchi's robust parameter design is an approach to reduce the performance variation of quality characteristics in products and processes. In robust design, the signal-to-noise ratio (SN ratio) was used to find the optimum condition to minimize the variation of quality characteristics as much as possible and bring the average of quality characteristics closer to the target value. In this paper, we propose a simultaneous optimization method based on a linear model of the SN ratio as a method to find the optimal condition of the control factor in case of multi-characteristics. In addition, the proposed method and the existing method were compared and studied by taking actual cases.

• 한국통신학회논문지
• /
• 제22권4호
• /
• pp.804-811
• /
• 1997

In the CDMA mobile communication system, reverse power control can be used to minimize the interference level for a good quality of the voice channel, and used to maxmize the system capacity. In this paper, we have analyed the environment of the K-parameter and the access procedure for the mobile station, and proposed a new algorithm for the access probe procedure of the station. K-parameter is determined according to the environment of the base station and access probe can adaptively control the power according to the position changes of the mobile station or the rapid and various state changes of the channel. Simulation results in the limited test environment show that it can increase the system capacity and decrease the power comsumption of the mobile station while maintaining the good and stable quality of the voice channel.

• 한국물환경학회지
• /
• 제29권6호
• /
• pp.762-776
• /
• 2013

Load duration curve was applied to determine important water quality parameter control term for improvement of Paldang lake water quality. Load duration curve was analyzed with long term data from 1985 to 2012 including water quality, flow rate and climate state of Paldang water environment. From the result of flow rate patterns of paldang lake, differences between high and low flow rate of each year showed tendency of increase because rainfall characteristics of paldang lake watershed were changed by climate exchange. Both of land use state of upper Paldang lake watershed and number of limit excess from load duration curve indicated that seasonal action related with land use such as agricultural fertilizer distribution in upper watershed affected Paldang lake water quality. So focused BOD (biological oxygen demand) management during spring season from march to June is required to control organic materials in Paldand lake. The main affecting factor of TOC (total organic carbon) increase in Paldang lake was initial rainfall after march. T-N (total nitrogen) kept increasing during research period, so enhancement of T-N standard is needed to T-N control. Initial rainfall and increase of temperature during spring season from March to June showed a positive correlation with TP (total phosphorus) and Chl-a, respectively.

• Journal of Power Electronics
• /
• 제13권3호
• /
• pp.458-468
• /
• 2013

Large capacity reactive power compensation and harmonic control in the low-voltage grid of an enterprise, are important technical means to improve power quality and reduce power loss. In this paper, the principle of an efficient power quality controller is analyzed. Then, key application technologies of the HPQC which would influence the performances of the HPQC are studied. Based on an analysis of the harmonic shunt problem, a frequency dividing control strategy of the HPQC continuous subsystem is proposed. A parameter design method of the HPQC discrete subsystem and its installation method are also proposed to ensure the system compensation effect. HPQC systems have been designed for a copper foil plant. The effectiveness of this paper has been verified by the simulation and application results.

• 한국정보처리학회논문지
• /
• 제4권12호
• /
• pp.3150-3158
• /
• 1997

ATM망에서 트래픽 제어는 서비스 질을 향상시키기 위한 방법으로 폭주가 일어난 후에 처리하는 반응 제어와 폭주가 발생하기 전에 처리하는 예방 제어의 2가지 방법이 있다. 특히 예방 제어의 방법은 연결 수락 제어, 사용 매개변수 제어, 망 매개변수 제어, 우선 순위 제어가 있다. 본 논문에서는 리키 버켓 기법에 점핑 윈도우 기법을 복합한 이중구조로 설계된 효율적인 사용 매개변수 제어 알고리즘을 제안한다. 제안 알고리즘은 먼저 리키 버켓를 사용하여 최대비트율을 제어하고, 점핑 윈도우를 사용하여 평균비트율의 위반여부를 판단하여 트래픽 제어를 한다. 제안된 알고리즘의 성능평가를 위하여 On/Off 트래픽 소스 모델을 가정하고 시뮬레이션 한 결과 기존 리키 버켓 기법보다 셀 손실률의 저하를 보였고, 버켓 크기도 감소시킬 수 있었다.

• 전자공학회논문지B
• /
• 제33B권11호
• /
• pp.106-115
• /
• 1996

In this paper, the method using virtual scheduling suggested algorithm (VSSA) is suggested by considering cell delay variation and token rate of leaky bucket. This method is compared with virtual scheduling algorithm (VSA) and virtual scheduling algorithm with no tolerance excessive peak cell rate. As a result, the research shows that the usage parameter control using vSSA makes quality of service better than the usage parameter control using vSA or VSANT does because the suggested method reduces the violated cell probability of conformed peak cell rate and intentionally excessive peak cell rate.

• 품질경영학회지
• /
• 제49권4호
• /
• pp.467-482
• /
• 2021

Purpose: The main theme of this study is to determine the optimal control limit of conditional variance investigation by mathematical approach. According to the determination approach of control limit presented in this study, it is possible with only one parameter to calculate the control limit necessary for budgeting control system or standard costing system, in which the limit could not be set in advance, that's why it has the advantage of high practical application. Methods: This study followed the analytical methodology in terms of the decision model of information economics, Bayesian probability theory and Taguchi's quality loss function concept. Results: The function suggested by this study is as follows; ${\delta}{\leq}\frac{3}{2}(k+1)+\frac{2}{\frac{3}{2}(k+1)+\sqrt{\{\frac{3}{2}(k+1)\}^2}+4$ Conclusion: The results of this study will be able to contribute not only in practice of variance investigation requiring in the standard costing and budgeting system, but also in all fields dealing with variance investigation differences, for example, intangible services quality control that are difficult to specify tolerances (control limit) unlike tangible product, and internal information system audits where materiality standards cannot be specified unlike external accounting audits.