• Korean Management Science Review
• /
• v.13 no.2
• /
• pp.177-191
• /
• 1996

Quality is defined as several terms of fitness for use, conformance to requirements or specification, and loss of social effect. And the quality can be classified into design, production and service quality according to its formation of product (or servece). To be satisfactory product, the product must be controlled to maintain the specified level of quality at the whole life cycle of R&D step through disposal step. And the wrong design is one of the great source of cost. Therefore, the quality assurance on the R&D step is very important. This paper suggests a general procedure for the R&D quality assurance and discusses the methods for the reliable design. And a telecommunication equipment is considered as an applied example. Finally, it is discussed some subjects on the R&D quality assurance as further researches.

• Journal of Korean Society for Quality Management
• /
• v.43 no.3
• /
• pp.327-340
• /
• 2015

Purpose : Recently, many quality issues are aroused in military forces, such as failures in K-series weapons, combat uniforms' defects and 40mm ammunition explosion accident. To address these problems, Defense Agency for Technology and Quality(DTaQ) introduced new systems such as Manufacturing Readiness Assessment(MRA), Test Report Information System(TRIS) and so on. However, these activities require the human and time resources which cannot be increased in short period. In this paper, we suggest more practical and efficient product examination method. Methods : The most popular and widely used government's quality assurance technique is a sampling method to examine the product. In this research, we first reviewed the DTaQ's quality assurance regulation, then identified several possible problems and finally suggested more efficient and effective sampling plans. Results : We have suggested new sampling framework and evaluated its performance on two military supplies by comparing with other sampling method, and observed that the number of tested samples can be substantially reduced. Therefore, required quality assurance time can be saved. Conclusion : In this paper, we first reviewed the product examination frameworks of DTaQ, PPQMS and DCMA. Then we identified several possible problems which can cause the loss of objectivity and time. To handle these problems, we suggested the new product examination framework and tested the framework to verify the performance.

• Journal of Korean Society for Quality Management
• /
• v.45 no.3
• /
• pp.335-347
• /
• 2017

Purpose: Defense government agencies in the world continuously try to improve operational efficiency in government quality assurance activities. The purpose of this paper is to propose some suggestions to enhance efficiency of government quality assurance (GQA) activities based on the analysis of the current quality assurance methods of advanced foreign agencies such as DCMA and NATO. Methods: In order to propose new directions, reviews and analyses are executed. (1) Former research results in Korea for enhancing GQA are reviewed, and their limitations are addressed. (2) Updated policies and procedures of the US DCMA and NATO are reviewed and their advantages are presented. (3) Current GQA policies and procedures are contrasted with those of US DCMA and NATO. Results: Suggestions for efficient Korean GQA activities are given in several aspects: GQA paradigm shift, clarification of GQA methods, facility-wide GQA, risk management for suppliers, counterfeit mitigation policy, data collection and control. Conclusion: Reviews on the government quality assurance policies and procedures of DTaQ, DCMA, and NATO are executed and compared with each other. The results of this research are expected to be useful guidelines to improve GQA policies and procedures in Korea, making it possible to realize more efficient GQA activities in Korea.

• The Journal of the Korean dental association
• /
• v.52 no.3
• /
• pp.139-146
• /
• 2014

The quality assurance program of a panoramic radiography is been discussed in two ways: phantom image tests and clinical image quality assurance tests. Methods and standards of each of the test are presented, which efforts guarantee a proper quality of image, improve standard of dental care and decrease radiation exposure.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.596-601
• /
• 2013

In the current pavement construction practice, the state agencies traditionally determine the quality of the as-constructed pavement mix based on individual mixture material parameters (e.g., air voids, cement or asphalt content, aggregate gradation, etc.) and consider these parameters as key variables to influence payment schedule to the contractors and the present and future quality of the as-constructed mixture. A set of empirically pre-determined pay adjustment schedule for each parameter that was differently developed and being used by the individual agencies is then applied to a given project, in order to judge whether each parameter conforms to the designated specifications and consequently the contractor may either be rewarded or penalized in accordance with the payment schedule. With an improved quality assurance system, the Performance Related Specification, the individual parameters are not utilized as a direct judgment factor; rather, they become independent variables within a performance prediction function which is directly used to predict the performance. The quantified performance based on the prediction model is then applied to evaluate the pavement quality. This paper presents the brief history of the quality assurance in asphalt pavement construction including the Performance Related Specifications, statistical performance models in terms of fatigue and rutting distresses, as an example of the performance prediction models, and envisions the possibilities as to how this Performance Related Specification could be utilized in other infrastructures construction quality assurance.

• Progress in Medical Physics
• /
• v.28 no.4
• /
• pp.197-206
• /
• 2017

We develop guidelines for the quality assurance of radiation treatment planning systems (TPS) by comparing and reviewing recommendations from major countries and organizations, as well as by analyzing the AAPM, ESTRO, and IAEA TPS quality assurance guidelines. We establish quality assurance items for acceptance testing, commissioning, periodic testing, system management, and security, and propose methods to perform each item within acceptable standards. Acceptance includes tests of hardware and network environments, data transmission, software, and benchmarking as specified by the system supplier, and apply the IAEA classification criteria. Commissioning includes dosimetric and non-dosimetric items for assessing TPS performance by applying the AAPM classification criteria and the latest technical items from the IAEA. Periodic quality assurance tests include daily, weekly, monthly, yearly, and occasional items by applying the AAPM classification criteria. System management and security items include the state and network connectivity of TPS, periodic data backup, and data access security. The guidelines for TPS quality assurance proposed in this study will help to improve the safety and quality of radiotherapy by preventing incidents related to radiotherapy.

• Journal of Aerospace System Engineering
• /
• v.2 no.1
• /
• pp.22-27
• /
• 2008

It is anticipated that quality assurance for the Ka band Communication Payload System(COPS) development program of the Communication, Ocean & Meteorological Satellite(COMS) may be a core technical factor to be concerned in order to avoid any failure, and to assure its performance during the mission lifetime in space. Those can be managed and verified and assessed by performing the Quality Assurance (QA) and risk management which helps to prevent and reduce the critical fails. This paper introduces the Product Assurance (PA) system and procedures for Ka band Communication Payload System which was established and performed during the Qualification Model (QM) manufacturing phase. In this paper, we present detailed process for the products manufactured by local companies according to PA procedures operated through whole phases from design to test of equipment. Also this paper shows Quality Assurance (QA) procedures and detailed their processes for assured the product quality manufactured by local companies.

• Progress in Medical Physics
• /
• v.24 no.4
• /
• pp.315-322
• /
• 2013

The aim of this work is to verify the self-quality assurances in medical institutions in Korea through the external audits by the group of experts and have a mutual discussion of the systematic problems. In order to validate the external audits 30 of 80 medical institutions across the nation were picked out considering the regional distribution and the final 25 institutions applied voluntarily to take part in this work. The basic rules were setup that any information of the participants be kept secrete and the measurements be performed with the dosimetry system already verified through intercomparision. The outputs for 2 or more photon beams, the accuracy of gantry rotation and collimator rotation and the poistional accuracy of MLC movement were measured. The findings for the output measurement showed the differences of -0.8%~4.5%, -0.79%~3.01%, and -0.7%~0.07% with respect to that of the verified dosimetry system for the 6MV, 10MV, and 15MV, respectively. For the reference absorbed dose 8 (16%) of 50 photon beams in 25 medical institutions differed 2.0% or greater from the reference value. The coincidences of Field size with x-ray beam and radiation isocenters of Gantry roration and collimator rotation gave the results of within ${\pm}2$ mm for every institute except 2 institutions. The positional accuracy of MLC movement agreed to within ${\pm}1$ mm for every institute. For the beam qualities of 6 MV photon beams kQ values showed the distribution within 0.4% between maximum and minimum. For the protocols 21 institutions (84%) used absorbed dose to water based protocol while 4 insitutions (16%) used air kerma based one. 22 institutions employed the SSD technique while 3 institutions did the SAD one. External audit plays an important role in discovering the systematic problems of self-performing Quality Assurances and having in depth discussion for mutual complementation. Training experts of international level as well as national support system are required so that both the group of experts of medical physicists and government laboratory could perform together periodical and constant external audits.

• International Journal of Quality Innovation
• /
• v.5 no.2
• /
• pp.26-44
• /
• 2004

Distance Education is a non-traditional mode of training and can take many forms, one of which is the use of Computer Based Training (CBT). This paper reviews various quality assurance models for designing the delivery of programmes at the universities and other training institutions. It presents the findings of a CBT research that is currently being carried out at the Department of Mechanical and Manufacturing Engineering, University of the West Indies, Trinidad. The significance of the research is discussed with particular emphasis on the influence of curricula sequencing on knowledge acquisition in learners of varying cognitive styles. The paper concludes that adherence to quality assurance principles could result in the enhanced performance of users of the CBT.

• Journal of Korean Society for Quality Management
• /
• v.25 no.1
• /
• pp.142-155
• /
• 1997

To successfully carry out large scale research projects while su, pp.rting quality assurance of research output, effective and systematic management through utilization of resources such as manpower, time and cost as well as engineering techniques such as component technology and design methodology is required. It is necessary to establish development methodology to su, pp.rt quality assurance. The development methodology covers the contents and procedures of the project, such as division of the project into independently executable units, allocation of resources including researchers, component technology, related know-how and equipment, deployment of research units and integration of the project at the end. In this paper we present systematic development methodology for quality assurance in large scale software development projects by analyzing the contents of the methodology a, pp.ied to the Gigabit Information-processing And Networking Technology development project(GIALT).