• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1529-1533
• /
• 2005

In this paper designed available pre-amplifier to Intrabroadband power amplifier. Designed pre-amplifier used WJ company's AMI which frequency characteristic and noise characteristic are superior. Designed to have superior VSWR characteristic and frequency characteristic covering broadband of 100MHz ${\~}$ 3GHz using feedback. Designed ye-amp broadband special qualify such as EMC measurement equipment roll important position do to utilize to power amplifier of equipment that how consider.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.137-139
• /
• 1998

Electrical service faults and momentary voltage variances may result in a costly shutdown. This papers present the degree that power qualify variance have an effect on the performance of induction motor.

• Journal of Korean Society for Quality Management
• /
• v.27 no.1
• /
• pp.165-194
• /
• 1999

Taguchi's parameter design seeks proper choice of levels of controllable factors (Parameters in Taguchi's terminology) that makes the qualify characteristic of a product optimal while making its variability small. This aim can be achieved by response surface techniques that allow flexibility in modeling and analysis. In this article, a collection of response surface modeling and analysis techniques is proposed to deal with the multiresponse optimization problem in experimentation with Taguchi's signal and noise factors.

• Journal of Korean Society for Quality Management
• /
• v.30 no.1
• /
• pp.61-73
• /
• 2002

The Quality Function Deployment(QFD) is a Quality Management technique to maximize customers' satisfaction by reflecting customer requirements into all business processes, including concept definition, product planning, parts planning, process planning, production planning, and sales planning. The basic concept of the QFD is to translate customers' requirements appropriately into engineering characteristics, into parts characteristics, into process characteristics, and into specific requirements and activities in production. In this study, we reviewed and analyzed the application process of the QFD to the development of A2 FATC (Full Automatic Temperature Controller), an automotive component developed and produced by company A. It has been reported that by applying the QFD to the development of A2 FATC, company A. achieved 34% improvement in control robustness quality characteristic, 27% improvement in deviation quality characteristic, and 30% improvement in overall quality characteristics.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.14 no.24
• /
• pp.133-139
• /
• 1991

If the specifications of product. in general. art determined too wide. the precision of product becomes diminished. Otherwise it costs dearly to keep the precision. Therefore, It is realistic to consider various factors in determining specification of qualify characteristics TAGUCH Idefines quality of an object as "Quality is the loss that a product causes to society after being shipped. other than any losses caused by its intrinsic function". Particularly, to improve the performances of product TAGUCHI focuses his attention on the product design and process design which enable the functional characteristics of product to he robust to noises. In this paper, by the TAGUCHI's loss function, the characteristics which affect the variation of a product performance are classified into the scrappable characteristics and the reworkable characteristics when the target values of functional characteristics have been determined. And we will determine the tolerance of each characteristic which minimize the quality cost by the cost function which considers the economic factors and probability features of each characteristic.cteristic.

• Journal of the Korean housing association
• /
• v.2 no.1
• /
• pp.13-34
• /
• 1991

The main purpose of this study is to examine housing norm of the middle classes, housing norm and normative housing deficits by independent variables(socio - economic variables, family characteristic variable sand housing characteristic variables).There are two major findings of this study as follows :1. In the housing norm, housing space is 99.Om2, the number of rooms is 3.0, housing structure type is apartment, the maintenance cost is 13 thousand won, and housing tenure is home ownership. And housing qualify is classified into 5 dimensions, and neighborhood environment is classified into 3 dimensions.2. This thesis is to conform Morris et aL.(1984)`s hypotheses that cultural norm is homogeneous in culturally unified society and if it appears heterogeneously, It is the subject`s reporting error of the subjects confusing cultural norm with family norm.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.4
• /
• pp.313-320
• /
• 2001

It is well known that the amount of hot-dip Zn coated sheet steels used for automotive is rapidly increasing. As hot-dip steel sheets show good corrosion resistance and excellent formability, the demand for outer panel of automotive has been increased in order to satisfy with the requirement of high surface qualify. There are many kinds of factors influencing on the surface quality and the dross control in the galvanising bath is regarded as one of the most important thing. In this study the characteristic and growing behavior of dross in the galvanizing bath were investigated and the effect of dross on the surface defect of GA was surveyed. The dross defects on the GA sheet steels result from bottom dross whose diameter are larger 50$\mu\textrm{m}$ in the Zn pot. Dross-free state exist for about 30 hours from starting time of GA production.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.5 no.2
• /
• pp.191-205
• /
• 1999

The purpose of this study is to identify the influence of family support on hope of the patients with stroke. Subjects were 53 in-patients with stroke in two general hospitals and one oriental medicine hospital located in Seoul and Kwang-Ju. The instruments used for this study : The family support scale developed by Kang Hyun Suk(1985). The hope scale developed by Nowotny(1989). The Data were analyzed with descriptive statistics, t-test, ANOVA. Pearson's correlation and simple regression. Data had been collected from December 24, 1998 to January 31, 1999. The results of this study were as follows The mean score of family support was 43.94 and the mean score of the hope was 80.89. The relationship between family support and the hope of the patients with stroke revealed a significant correlation (r= .560, p= .0001). The variables influencing family support and the hope of the patients with stroke were as follows : There was significant difference between family support and general characteristic factor, which was family chief caregiver (p= .002). There was no significant difference between hope and general characteristic factors. but There were significant differences between one of the subscales of hope, 'confidence in the outcome' and general characteristic factors, which were age(p= .021), perceived disability effect(p= .027). There were significant differences between one of the subscales of hope 'possibility of future', and general characteristic factors, which were age(p= .016), education(p= .018). There was significant difference between one of the subscales of hope. 'spiritual belief', and general characteristic factors, which was religion(p= .002). There was significant difference between one of the subscales of hope, 'active involvement', and general characteristic factors, which was family chief caregiver (p= .012). It was found that the higher the degree of perceived family support, the higher the degree of hope. Clearly, the perceived family support can contribute significantly and positively to hope of the patients with stroke. Therefore, nurses should plan interventions to inspire hope level of patients with stroke by family support. The above results may be used as the basic data to seek more efficient way of elevating nursing practice and qualify for the patients with stroke.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.19 no.2
• /
• pp.212-222
• /
• 2006

Backgroun : Tinnitus is common disorder with many possible causes and a symptom of many different diseases but has no effective treatment. Approximately 20% of tinnitus patients experience the disorder to a degree that their quality of lift and productivity are impaired. Objective : This study was conducted to investigate the characteristic of the tinnitus patients and the impact of tinnitus on quality of life. Methods : 103 patients un recruited in this study who was ill with tinnitus. They wrote out the queslicumaire about tinnitus and the Tinnitus Handicap Inventory(THI). Result : THI score have relation to set the period of birth, the loudness of tinnitus and the items of attending symptoms. Conclusion In this study, tinnitus have influence on patients' quality of life. We expect this study to provide the base data for the effective treatment and the high qualify of patients' life.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.1-8
• /
• 2002

At present, company has to produce a product that consumer like with a competitive price, a good quality, and a fitting time to supply. Process control and qualify control are very important to supply with a product uniformly and inexpensively In this paper, the characteristic of product quality is monitored by control chart during the machining process and construction of quality control cycle is considered to divide into two types in this case that different assignable causes lead to shifts having different magnitudes. Then we are intended to find a process shift magnitude which has economical quality cost policy and are considered to quality cost functions to find a process shift magnitude. Those costs are categorized into the well-known categories of prevention, appraisal, and internal failure and external failure. This paper ends with numerical examples that demonstrate the usefulness of the model.