• 한국환경과학회지
• /
• 제14권11호
• /
• pp.1035-1047
• /
• 2005

By using hourly $NO_2$ concentration data$(1998\~2000)$ at the Busan Metropolitan City air qualify monitoring sites, characteristics of daily mean value of $NO_2$ concentration was discussed in space and time. The correlation between $NO_2$ concentration and other relating air pollutants was analyzed by using SAS program and meteorological parameters as well. After choosing representative 4 areas, this study used hourly concentration data$(1998\~2000)$ from air quality monitoring sites on $NO_2,\;NO,\;O_3,\;CO,\;SO_2\;and\;PM_{10}$. Typical metropolitan characteristics of two peaks in a day was shown in the variation of $NO_2$ concentration of Busan city.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.172-174
• /
• 2005

Recently, a concern of power qualify increases because of electronic device development and well-being generation. Power quality problems such as voltage sag, harmonics, flicker etc. have adverse effects on electric devices. Therefore, power quality problems have been monitored. This paper studies a detection of voltage sag that is more severer than the others. A voltage sag has been monitored using rms or wavelet method. This paper proposes an advance detection method using wavelet. An error Of Start Point differs error of ending point. We use this difference. So, we respectively revise detection error. Also, we revise multiplying average error rate.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.230-233
• /
• 2005

This paper proposes power qualify assessment using Markov Chain applied to Ergodic theorem. The Ergodic theorem introduces the state of aperiodic, recurrent, and non-null. The proposed method using Markov Chain presents very well generated harmonic characteristics according to the traction's operation of electric railway system. In case of infinite iteration, the characteristic of Markov Chain that converges on limiting probability Is able to expected harmonic currents posterior transient state. TDD(Total Demand Distortion) is also analyzed in expected current of each harmonic. The TDD for power quality assesment is calculated using Markov Chain theory in the Inceon international airport IAT power system.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권11호
• /
• pp.572-576
• /
• 2003

For quite a long time various researches and developments of superconducting magnetic energy storage(SMES) device have been done for enhancement of power qualify control of sensitive electric load. This paper describes the design. fabrication and experimental results for the 3MJ SMES magnet made by using the design code of a SMES device that we developed. A computer code was developed to find the parameters of the SMES magnet which has minimum amount of superconductor for the same stored energy, and the 3MJ SMES magnet was designed based upon that. And the 3MJ SMES magnet designed based upon those. In addition, 3MJ SMES magnet was made based on several research results which were ramp up to 1㎄ without quench.

• 한국경영과학회지
• /
• 제24권1호
• /
• pp.39-48
• /
• 1999

An economic procedure of selective assembly is proposed when a product is composed of two mating components. The major qualify characteristic of the product is the clearance between the two components. The components are divided into several classes prior to assembly. The component characteristics are assumed to be independently and normally distributed with equal variance. The procedure is designed so that the proportions of both components in their corresponding classes are the same. A cost model is developed based on a quadratic loss function and methods of obtaining the optimal class limits as well as the optimal number of classes are provided. Formulas for obtaining the proportion of rejection and the unavailability of mating components are also provided. The proposed model is compared with the equal width and the equal area partitioning methods using a numerical example.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.246-249
• /
• 2003

For quite a long time various researches and developments of superconducting magnetic energy storage(SMES) device for enhancement of power qualify control of sensitive electric load. This paper describes the design, fabrication and experimental results for the 3MJ SMES magnet made by using the design code of a SMES device that we developed. A computer code was developed to find the parameters of the SMES magnet which has minimum amount of superconductor for the same stored energy, and the 3MJ SMES magnet was designed based upon that. And 3MJ SMES magnet made base of several research result which was ramp up to 1㎄ without quench.

• 한국멀티미디어학회논문지
• /
• 제7권2호
• /
• pp.164-172
• /
• 2004

그레이스케일 영상을 이진 영상으로 변환하는 방법을 해프토닝이라 한다. 이런 방법 중 오차확산방법은 그레이스케일 영상을 이진 영상으로 표현할 때 우수한 화질을 보이지만 웜 현상, 뭉쳐짐 현상 등의 단점이 있다. 이런 단점을 보완하는 방법 중 하나가 임계값 변조 방법이다. 본 논문에서는 영상의 국부적인 특성을 고려한 임계값 변조치를 적용한다. 먼저 원영상과 해프토닝 영상의 선형이득을 이용해 평탄영역에 대한 오차를 최소화하는 임계값 변조치를 구한다. 그리고 이 값들에 경계정보에 따른 보정 값을 주어 경계영역을 표현한다. 제안방법은 해프토닝시 발생하는 오차를 줄여 오차로 인해 발생하는 영상내의 뭉쳐짐 현상과 웜 현상 등을 최소화하여 기존의 방법에 비해 더 좋은 화질을 얻을 수 있다.

• 간호행정학회지
• /
• 제12권4호
• /
• pp.587-596
• /
• 2006

Purpose: This study aimed to understand the empowerment in clinical nurses and to analyze the influences of job characteristics and professionalism on empowerment. Method: Subjects were 386 nurses in 8 general hospitals at G city and Seoul. Data were collected with self-administered questionnaires and analyzed using SAS 8.1 by applying ttest, ANOVA, Pearson correlation coefficient, and Stepwise multiple regression. Results: Empowerment was $3.58{\pm}0.63$ and among the subscale scores meaningfulness $(3.83{\pm}0.74)$ was the highest and Impact $(3.23{\pm}0.86)$ was the lowest. The level of empowerment was different significantly by age, marital state, education, clinical careers, position, job satisfaction(p<.00). Job characteristic score was $3.60{\pm}0.45$ and Professionalism score was $3.65{\pm}0.52$. Empowerment was positively correlated with job characteristics and professionalism(r= .63, .81, p<.01). Major factors that affect to empowerment in clinical nurses was professionalism, which had an explanation of 66.9%. Conclusions: The more clinical nurses took the professionalism, the higher nurses perceived empowerment. Therefore, empowerment and professionalism in nurses should be generally screened and other factors should be looked into. And if the specified nursing intervention program which increase their empowerment would be developed, it may contribute to qualify the nursing services.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1573-1576
• /
• 2003

The quality of bundles is closely related with the apparent thickness. Especially the variation of apparent thickness of bundle determines the qualify of the plane structure made or the bundle such as surface evenness, pore size, and the shape of air-gap, etc.,. This study is dealing with the development of a new measuring system of the thickness of bundle or cross-section by determining the size of the shadow of the object covered by a laser slit beam. Also the measured signal is characterized in terms of the correlogram, the irregularity in wavelength. The correlogram for the irregularity of several sample types could be represented by a sinusoidal function with exponentially decaying amplitude. Moreover, influence of the measuring speed on the signal and the characteristic differences according to the different types of bundle are investigated.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.746-752
• /
• 2006

The major objective of this study is to investigate the dynamic behavior evaluation of split PC sleepers for railway turnout by the field test. In railway engineering, a turnout is necessary to allow a vehicle to move from one track to another. So, turnout is required very complex railway technologies such as lolling stock, track. In reference to conventional line speed-up and improvement railway, accurate assembly of turnout affects travel ins qualify of turnout area and running safety. Because of heavy weight and a large volume of the long sleeper used to turnout and car limit, transport and the prerequisite for trouble-free transport of the factory pre-assembled major turnout components is achieved through division of long sleepers. The one of the advantages for using a split sleeper is to reduce the dynamic vibration according to the information of developed nations. Therefore, we investigate the characteristic of dynamic behaviors of split sleepers which are adopted for the first time to improve performance of turnout From the field test results of the split sleeper, it is evaluated that the modification of weight, material and stiffness compared with wood sleeper is very effective for the ballast safety. However, the decrease in vibration of split sleeper was not found out.