• Journal of Aerospace System Engineering
• /
• v.14 no.2
• /
• pp.12-19
• /
• 2020

In Korea, the regulation is MOLIT Notice 2018-290, Guidance for Approval of Synthetic Flight Trainer as Flight Simulator and Flight Training Device. The FAA (Federal Aviation Administration) categorizes FSTD (Flight Simulation Training Device) into FFS (Full Flight Simulator) and FTD (Flight Training Device), according to its level. Additional categories for regulation are airplane and helicopter, depending on the type of aircraft. In this study, the objective tests for the handling quality of the FAA and Korean regulations were compared and analyzed. In QPS (Qualification Performance Standard), related test titles, flight conditions, and tolerance limits were analyzed for the handling quality. Based on this study, recommendations on amendments to the regulation was presented.

• Korean Journal of Human Ecology
• /
• v.17 no.6
• /
• pp.1125-1133
• /
• 2008

The purpose of this study was to explore the perception toward qualification of early childhood English teachers and their teachers' sense of efficacy. The samples consisted of 201 early childhood English teachers in Seoul, Daejeon, Daegu, Gyeonggi area. A sample of early childhood English teachers completed a series of questionnaires. The collected data were analyzed with t-test, F-test, correlation. The results showed that most teachers were women between 30 to 40 years old, university graduate with job experience less than 3 years. In addition, half of teachers in this study majored on English studies or early childhood education and child studies. This study found that early childhood English teachers thought themselves to be qualified as a English teacher and early childhood teacher. And they rated teachers' sense of efficacy to relatively high. There were differences on the scores of qualification of early childhood English teacher and teachers' sense of efficacy according to education level and major. And years of job experience were positively related with the perception of qualification of early childhood teacher and teachers' sense of efficacy.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.782-787
• /
• 2023

Korea augmentation satellite system (KASS) integration, verification, qualification (IVQ) activity is verification of requirements for KASS system and its sub-system that were performed based on the inspection, analysis, review of design, test (IART) method from factory acceptance test (FAT) to test readiness review (TRR) after critical design review (CDR) was closed. In the FAT phase, developed equipment was installed on the test platform and we were verified interfaces between sub-systems and coupling test with the kass control station (KCS). In the site aceeptance test (SAT) phase, on-site verification was conducted by installing equipment verified by FAT such as kass reference station (KRS), kass processing station (KPS), kass uplink station (KUS), KCS. However, considering the developed plan and status, SAT was divided into 3 phases and coupling test was performed. In the TRR phase, the KASS system verification was performed through FAT's test list and additional test list using the satellite based augmentation system (SBAS) broadcast signal from geostationary earth orbit (GEO) 1.

• Journal of Technologic Dentistry
• /
• v.20 no.1
• /
• pp.13-19
• /
• 1998

This study was performed to identify the current problem of The National Qualification Examination for Dental Technician and to provide suggestion for improvement of The National Qualification Examination System. This study was based on the questionaries answered by the professors in the department of dental technology of college and the members of Korea dental technician's society. The result could be summarized in the following. 1. The examination should be held not only in Seoul but in other areas simultaneously. 2. Prepartation of The National Qualification Examination should be entrusted to a committee composed of selected members of The Korea Dental Technician Association and selected members of professors in the department of dental technology. 3. The carrving practical examination should be continued and the method of grading should be change to ensure fairness, objectivity and balance. Specially colored wax can be used to prevent cheating in test. 4. The examination on the subject of "The Introduction Dental Anatomy" should be different for dental technicians and dental hygienists. And the subjects need to be divided into "Dental Morphology" and "Oral Anatomy".

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.193-196
• /
• 2007

We developed and tested the high pressure hydrogen gas cylinder(type4) for fuel cell vehicle. The working pressure is 350bar. We conducted material tests, production tests and design qualification tests on the developed cylinders according to modified NGV2-2000(hydrogen). The high pressure hydrogen gas cylinder met all the design qualification requirements of ANSI/CSA NGV2-2000 and acquired NGV2 certification from independent inspection agency.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.3
• /
• pp.251-256
• /
• 2000

This report analyzes the Source Qualification Test which is composed of main functional and environmental tests for the localizing avionics(electronic subsystem for aircrafts and spacecraft) and high performance mechanical subsystem. Especially the detail test approaches of integrated servo actuators which is the main part to supply the power to the main and other flying control panel. Nowadays this subsystem works with mechanical and electrical engineering technique. In detail, electrical signal is used as input and transferring tool and mechanical part is the output as a power and manufacture the physical dimensions and functions. Finally in this review, the new test procedure to prove the function by the new manufacturer is established.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.5
• /
• pp.20-26
• /
• 2012

An APU(Auxiliary Power Unit) for helicopters has been developed in Korea and tested at the AETF(altitude engine test facility) in KARI(Korea Aerospace Research Institute) for the purpose of the military qualification. A cell correlation test was performed before the official test, and the results are within the tolerance. The APU has the capability of supplying electric power as well as compressed air to the helicopters. It was tested at bleed extraction conditions, electric power extraction conditions, and maximum continuous concurrent power conditions within the entire helicopter flight envelop. Some special test equipments were implemented for the measurement of air flowrate, electric power and so on. The tests were successfully performed and their results satisfy the requirements of the helicopters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.82-85
• /
• 2015

This paper describes a research for improvement official approval of information processing in national technical qualification. In this paper, we analysis the contents of current exams and propose the new evaluation method of practical exam in information processing fields through grafting new trends of ICT and ability unit, fulfillment criteria in national competency standards(NCS). Also, we have verified the effect of exam through the pilot test. In the future, we will apply the new exams after the revision of guidelines for marking questions by expert group in its duty fields basis on this research.

• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.543-556
• /
• 2021

The purpose of this study is to examine possible improvements of operation of sign language interpreter qualification system through looking into specific perceptions of sign language interpreters and Deaf sign language interpreters in the field and Deaf people who use interpretation service on current sign language interpreter qualification system through focus group interview. As a result of the thematic analysis, three high-level categories were derived for each group, and as a result of recombining them, 'change to a qualification system in which sign language interpreting competency and expertise can be recognized' and 'improvement to a qualification system based on Korean Sign Language and Deaf culture' been sorted out. Based on the above research results, 'establishment of a permanent institution in charge of management and operation of sign language interpreter qualification tests', 'reorganization into a qualification system that reflects the professionalism, level and experience of sign language interpreters', 'all test questions and exam procedures are conducted mainly in sign language', 'a system in which the Deaf take the lead', and 'enactment of a code of ethics for sign language interpreters and Deaf interpreters' were suggested.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.56-62
• /
• 2006

This paper describes the MMIC product qualification of the Ka band satellite transponder for the COMS(Communication, Ocean and Meteorological Satellite). Ka-band active equipment for the COMS communications transponder are being developed by using 12 kinds of MMICs which include low noise amplifiers, medium power amplifiers, frequency mixers, frequency multipliers, RF switch, and HEMT attenuator MMIC, Those MMICs had been fabricated at the MMIC production foundry of northrop Grumman Space Technology (Velocium) which is qualified for space application, and experienced in various space programs during past decades. For the MMIC product qualification, Visual inspection and SEM inspection had been performed, and burn-in test for 240 hours and accelerated life-test for 1000 hours had been done on test fixtures of individual MMIC products at $125^{\circ}C$. Additionally, infrared temperature scanning and finite element simulation were performed to analyze and confirm the channel temperature of semiconductor devices on several representatives of those MMIC products that os one of the most important factors in performance degradation and life reduction.