• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.107-109
• /
• 2006

The additional matters appear to be considered in several aspects for building up power-quality measuring system of transmission system(high voltage system) compared to distribution system(middle or low voltage system). Like in distribution system, input signals are also received from PT and CT source of voltage and current respectively in transmission system and applied in accordance with a certain rate. In this case, very big error rate can be occurred according to the specification of the measuring system as the applying rate is bigger than in distribution system beyond comparison. In addition, when the abnormal signal occurred such as sag/swell, interruption, transient etc., power quality of other sites linked to the system also should be checked to find the accurate cause of the abnormal power-quality signals from the corresponding site. Accordingly, the accurate diagnosis on the condition of Power quality for the system depends on the way how the synchronization system is brought along for each site. This paper will suggest the solution for the most effective system building focused on how to solve the problem of the error rate and synchronization described in the above when building up the measuring system of power quality for transmission system.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.432-434
• /
• 2006

The additional matters appear to be considered in several aspects for building up power-quality measuring system of transmission system(high voltage system) compared to distribution system(middle or low voltage system). Like in distribution system, input signals are also received from PT and CT source of voltage and current respectively in transmission system and applied in accordance with a certain rate. In this case, very big error rate can be occurred according to the specification of the measuring system as the applying rate is bigger than in distribution system beyond comparison. In addition, when the abnormal signal occurred such as sag/swell, interruption, transient etc., power quality of other sires linked to the system also should be checked to find the accurate cause of the abnormal power-quality signals from the corresponding. site. Accordingly, the accurate diagnosis on the condition of power quality for the system depends on the way how the synchronization system is brought along for each site. This paper will suggest the solution for the most effective system building focused on how to solve the problem of the error rate and synchronization described in the above when building up the measuring system of power quality for transmission system.

• Agribusiness and Information Management
• /
• v.6 no.2
• /
• pp.13-23
• /
• 2014

The world is in the process of a structural change related to ICT convergence knowledge industries. ICT is leading to the creation of new products and services, and is making our lives more convenient, safer, and more efficient. In advanced countries, many studies have been conducted with the goal of developing new business models converged with ICT, and this is also the case in the food industry. Korea possesses world-leading ICT, and if this ICT is applied to the food industry, a world-class new business model can be developed. The u-Food System, which is in the process of development in Korea, is a next-generation food system that can allow food providers, consumers, and distributors to access various types of information about food products, including traceability, distribution, safety, quality, and freshness, and manage this information. It is a future food system that converges ICT, biotechnology and sensing technology with food. Based on the u-Food System, this paper will introduce the status of current smart quality distribution technologies that converge ICT (such as sensor tag, sensor network, LBS, GIS, and CDMA) with food technologies (such as traceability, quality, distribution management) to manage the safety and quality of fresh food in the distribution process.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.4
• /
• pp.28-37
• /
• 2001

The water quality in Yongil Bay is getting worse due to the sewage and the waste water from the surrounding industrial complex. The study aims to simulate the current system that is necessary to build ecosystem model for the optium water quality control and clarify the correlation of current system characteristics with water quality in Yongil Bay. To clarify the characteristics of coastal water movement system and verify the applicability of the 3-D model, the current system was simulated using 3-D model baroclinic model which considers tidal current and density effects. As the results of numerical experiments, it is proved the 3-D model is the most applicable on appearing the current system of the stratificated Yongil Bay difference of density. Form the results of simulation considered tidal current only, it can be clarified that the water body flows in the inner bay through the bottom layer and flows out the outer bay through the surface layer in Yongil Bay. And the fresh water from the Hyongsan river and the thermal discharge form POSCO have a little effect on the current system in Yongil Bay, but the diffusion of heat and salt has an important effect upon the formation of the density stratification of the water quality distribution is closely related with the current structure characteristics as well as the tidal residual current system in Yongil Bay.

• Journal of Korean Society for Quality Management
• /
• v.51 no.4
• /
• pp.633-642
• /
• 2023

Purpose: The variation of the internal diameters of gun barrel incurs a lot of reworks in gun barrel manufacturing process and the significant quality problem of gun barrel. And it is likely to stem from the current measurement system for the internal diameter of gun barrel and the related manufacturing process as well. The purpose of this study is to improve the gun barrel manufacturing process through improving measurement system. Methods: The improved measurement system using laser can measure the internal diameters of gun barrel more accurately, and the properly adjusted honing process reduces the variation of internal diameters of gun barrel. Results: Comparing the mean square error of internal diameters for 6 gun barrels measured before and after process improvement shows that the variation of gun barrel internal diameters was significantly reduced after the process improvement. Conclusion: The introduction of improved measurement system for the internal diameters of gun barrel and the adjustment of related honing process results in the reduction of reworks of gun barrels and their internal diameter variations.

• Food Science and Preservation
• /
• v.18 no.2
• /
• pp.156-164
• /
• 2011

This study was conducted to develop a portable quality evaluation system of bee-honey by near infrared spectroscopic technique. Two kinds of bee-honeys from acacia and polyflower sources were tested in this study. The system consists of power supply, tungsten-halogen lamp, detector, and optical fiber probe. Performance of the system was analyzed by comparing the prediction accuracy of the laboratory spectrophotometer. Total of 346 spectra was divided into a calibration set and a prediction set. The PLS (Partial Least Squares) models were developed to predict the quality parameters of bee-honeys. Reflectance spectra, moisture contents, ash, invert sugar, sucrose, F/G ratio, HMF(hydroxy methyl furfural), and $C^{12}/C^{13}$ ratio of honeys were measured. The PLS models of the laboratory spectrophotometer showed good relationships between predicted and measured quality parameters of honeys in the wavelength range of 1.100~2.200 nm. The PLS analysis of the portable quality evaluation system showed good relationships between predicted and measured quality parameters of honeys in the wavelength range of 1.100~1.300 nm and 1.400~1.700 nm. The results showed the feasibility of the portable quality evaluation system to determine the quality parameters of bee-honey in the field during harvesting.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.1020-1027
• /
• 2013

Today, Educational serious games are occupying a large portion of the serious game market but there is a lack of the quality evaluation systems for providing useful quality evaluation information about educational serious game to user or developer. Although the existing metadata management system for serious game is developed, the system had not provided a function to manage the quality evaluation information for educational serious game. Therefor the development of quality evaluation management system of educational serious game is a very important challenge. We proposed design of the system for managing a metadata and a quality evaluation for educational serious game. The advantage of our system is that the system provide a lot of reliable useful information for general users and developers, and support an easy and convenient tool to manage the metadata and quality information to managers.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.801-804
• /
• 1999

The interest in workability and quality control of concrete is increasing as to improve quality of concrete structure according to industrialization. Therefore, it is the aim of this study to evaluate the quality of flowing concrete and systematize quality control by analyzing the data of the quality control of concrete through a basic quality control system for improvement of the concrete in pumping flowing concrete for construction industy.

• Journal of Convergence for Information Technology
• /
• v.11 no.9
• /
• pp.75-83
• /
• 2021

This research is to analyze how an introduction of full-time quality control("QC") personnel system in audit firms influences on audit quality and verify how important it is to establish the quality control system for auditing quality. We measure audit quality as the level of discretionary accruals and compare the differences between audit firms with QC and without QC. In addition, we analyze the difference in audit qualities between before and after activating the full-time QC personnel system by comparing audit quality of before 2015 with that of after 2016. The results of this study are summarized as follows. First, the audit quality is higher when audit firms have QC personnel. Second, the audit quality is improved after the introduction of the full-time QC personnel system.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.45-52
• /
• 2021

The article proves the relevance of developing conceptual frameworks for managing the quality assurance of logistics activities in the context of socio-economic interaction of their participants. It is established that the fundamental difference of the logistic approach in management from traditional approaches is the allocation of a single management function of previously separated, disparate material flows, as well as economic, technological, information integration of chain links into a single system capable of effective management of these flows. It is substantiated that the functioning of the enterprise as a logistics system can be represented in the form of a triad of logistics components, namely: supply logistics, production logistics, sales logistics. Management of quality assurance processes of logistics activities in the context of socio-economic interaction of their participants is a functional component of the entire logistics system due to the quality of work and interaction of all participants in the implementation of certain activities. The quality of logistics activities will affect the level of economic potential, rationalization and optimization of all logistics flows. It is proved that the management of quality assurance processes of logistics activities in the context of socio-economic interaction of their participants involves the following main areas: the introduction of a quality system of logistics processes; development and implementation of the general strategy of quality improvement at the enterprise; internal integration; controlling. Management of quality assurance processes of logistics activities in the context of socio-economic interaction of its participants requires compliance with the following requirements: systematic and comprehensive management of all flow processes; coordination of criteria and indicators for assessing the effectiveness of the entire logistics system; dissemination of the use and application of information technology; ensuring partnerships and close interaction of all participants in sales networks.