• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.798-801
• /
• 2004

In this study, in order to develop low temperature sintering ultrasonic vibrator, PCW-PMN-PZT ceramics with the amount of $Nb_2O_5$ addition were manufactured. All of the fabricated sample showed pure pervoskite structure of tetragonal phase. With increasing the amount of $Nb_2O_5$ addition, mechanical quality factor Qm were increased up to 0.2wt%$Nb_2O_5$ addition and then decreased. And also, with increasing the amount of $Nb_2O_5$ addition, grain size, kp, density and dielectric constant were linearly decreased. At the 0.2wt% $Nb_2O_5$ addition composition ceramic, kp of 0.48, Qm of 2186, ${\varepsilon}r$ of 1219 were shown, respectively. Their values were suitable for ultrasonic vibrator application.

• 한국세라믹학회지
• /
• 제33권11호
• /
• pp.1260-1266
• /
• 1996

The effects of SiO2 MnO2 and sintering atmospheres (O2, N2) on the piezoelectric properties and densification behaviors of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 were investigated. The addition of SiO2 to the system enhanced the rate of densification but supressed the rate of grain growth. On the other hand the addition of MnO2 to the system did not nearly affect the rate of densification but increased slightly the rate of grain growth The densification of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 was promoted with increasing the partial pressure of O2. The relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 sintered under O2 atmosphere were higher than under N2 atmosphere. Whereas the mechanical quality factor (Qm) of specimens sintered under O2 atmosphere were lower than under N2 atmosphere. Thus the sintering atmosphere of O2 and N2 in Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 acted as donor and acceptor respectively. As the amount of SiO2 increased the relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 but the mechanical quality factor (Qm) did not nearly change, In the case of the addition of MnO2 to the system the relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 sintered under O2 atmosphere decreased rapidly with increasing the amount of MnO2 but they were unchanged with increasing the amount of MnO2 under N2 sintering atmosphere. Therefore the differences of the relative dielect-ric constant ($\varepsilon$r) and piezoelectric constant (d33) due to sintering atmosphere were diminished as the amount of MnO2 increased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.78-78
• /
• 2009

In this study, multilayer piezoelectric ceramics was manufactured using the PMW-PNN-PZT ceramics. Then, their physical characteristics for applicaton of electric power generation were investigated according to the numbers of multilayer. With increasing the numbers of multilayer, effective electromechanical coupling factor($k_{eff}$) and capacitance were decreased and increased, respectively.

• International Journal of Quality Innovation
• /
• 제6권1호
• /
• pp.98-108
• /
• 2005

In the light of globalisation and the international division of labour, the article will stress the importance of a new conception of quality management, focusing more on the social and environmental aspects of quality in global supply chains with a particular emphasis on suppliers' perspectives. The increasing focus on corporate social responsibility, business ethics, corporate citizenship, sustainable development etc. indicates that managers have failed to see social and environmental aspects of the production as an integrated part of quality.

• 품질경영학회지
• /
• 제37권3호
• /
• pp.83-93
• /
• 2009

This study proposes a stepwise approach to product safety management(PSM), of which roadmap consists of five phases. ISO 9001 QM model is assumed as the first-phase model and each higher-phase model is built by adding a corresponding module to the lower one. In the phase order, those modules are CCMS, a failure to warn, manufacturing defect and design defect. The progress in PSM of a domestic food company is discussed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.691-694
• /
• 2003

Density gradient method is used to analyze the quantum effect in MOSFET, Quantization effect in the poly gate leads to a negative threshold voltage shift, which is opposed to the positive shift caused by quantization effect in the channel. Quantization effects in the poly gate are investigated using the density gradient method, and the impact on the short channel effect of double gate device is more significant.

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3532-3534
• /
• 2014

In theoretical simulations of proton transfer in DNA, environmental factors nearly have not been considered. In our calculations, using QM/MM method on the basis of CP2K, proton transfer on adenine-thymine base pair is studied in water, at wide scope temperature, and under the external electric field. Our results indicate that the external electric field induces the proton transfer at room temperature, and its intensity and temperature have some effect on hole localization and proton transfer.

• 산업경영시스템학회지
• /
• 제17권32호
• /
• pp.199-207
• /
• 1994

A market has evolved from saturated state to over- saturated state because of variation of industrial circumstances. To improve the competitive power of a business under over- saturated state that the supply exceeds the demand, a business will seek after value management than quality management(QM). This paper define newly the concepts of value and quality and presents the value-management system based on it.

• Journal of Multimedia Information System
• /
• 제2권4호
• /
• pp.311-316
• /
• 2015

In this paperwork considered problem of using intelligent information systems as an assistant in making decisions by leaders, especially in legal sphere. The lawyers should not judge situation only based on codes or statues, they must take into account other values as well to come to effective solutions to problems. There are a few such programs which could help to make effective and proper decisions.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.484-489
• /
• 2004

The purpose of this study is to examine the success factor of Quality Management (QM) in the manufacturing conditions aspect of medium and small-sized sanitary enterprise. The requisite for manufacturing factors are classified into manufacturing human factors (the number of production employee, training and teaching, discuss on quality, manufacture expertness, etc.), manufacturing facility factors (coating, hardening, and molding equipment), manufacturing core component factors (temperature and viscosity, line, surface). And the indicator of quality outcomes are measured by reorder and recommendation to others.