• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1523-1528
• /
• 2014

Silicon quantum dots (Si QDs) were synthesized by etching silicon nanopowder with aqueous hydrofluoric acid (HF) and nitric acid ($HNO_3$). Then, the hydride-terminated Si QDs (H-Si QDs) were functionalized by 1- octadecene (ODE). By only controlling the etching time, the maximum luminescence peak of octadecylterminated Si QDs (ODE-Si QDs) was tuned from 404 nm to 507 nm. The average optical gap was increased from 2.60 eV (ODE-Si QDs-5 min) for 5 min of etching to 3.20 eV (ODE-Si QDs-15 min) for 15 min of etching, and to 3.40 eV (ODE-Si QDs-30 min) for 30 min of etching. The electron affinities (EA), ionization potentials (IP), and quasi-particle gap (${\varepsilon}^{qp}_{gap}$) of the Si QDs were determined by cyclic voltammetry (CV). The quasi-particle gaps obtained from the CV were in good agreement with the average optical gap values from UV-vis absorption. In the case of the ODE-Si QDs-30 min sample, the difference between the quasi-particle gap and the average optical gap gives the electron-hole Coulombic interaction energy. The additional electronic levels of the ODE-Si QDs-30 min and ODE-Si QDs-15 min samples determined by the CV results are interpreted to have originated from the Si=O bond terminating Si QD.

• Applied Science and Convergence Technology
• /
• 제24권6호
• /
• pp.254-256
• /
• 2015

Effect of growth temperature ($T_g$) on the structural and optical properties of $In_{0.5}Ga_{0.5}As$ atomic layer epitaxial (ALE) quantum dots (QDs) is investigated in the range of $T_g=480-510^{\circ}C$. $In_{0.5}Ga_{0.5}As$ ALE QDs consist of 5 periods of short-period superlattices (SPSs) of 1 monolayer-thick InAs and GaAs. Number of coalescent QDs decreases as $T_g$ increases, and they disappear at $T_g=510^{\circ}C$. As $T_g$ increases in the range of $480-495^{\circ}C$, sizes of QDs increase, and densities of QDs decrease due to merge of QDs. On the contrary, although sizes of QDs are maintained at $T_g=495-510^{\circ}C$, densities of QDs decrease. This is attributed to the desorption of material-mainly indium-during the growth interruption. This conjecture is supported by the optical properties of the QDs as a function of $T_g$. As a result, we propose that optimum growth temperature of the QD is $495^{\circ}C$ with less repetition of SPSs than 5.

• Applied Microscopy
• /
• 제36권spc1호
• /
• pp.35-40
• /
• 2006

Self-assembled InAs/GaAs quantum dots (QDs) were grown by the atomic layer epitaxy (ALE) and molecular beam epitaxy (MBE) techniques, The structure and the thermal stability of QDs have been studied by high resolution electron microscopy with in-situ heating experiment capability, The ALE and MBE QDs were found to form a hemispherical structure with side facets in the early stage of growth, Upon capping by GaAs layer, however, the apex of QDs changed to a flat one. The ALE QDs have larger size and more regular shape than those of MBE QDs. The QDs collapse due to elevated temperature was observed directly in atomic scale, In situ heating experiment within TEM revealed that the uncapped QDs remained stable up to $580^{\circ}C$, However, at temperature above $600^{\circ}C$, the QDs collapsed due to the diffusion and evaporation of In and As from the QDs, The density of the QDs decreased abruptly by this collapse and most of them disappeared at above $600^{\circ}C$.

• Applied Science and Convergence Technology
• /
• 제23권6호
• /
• pp.387-391
• /
• 2014

Self-assembled InAlAs/AlGaAs quantum dots (QDs) on GaAs substrates were grown by using modified molecular epitaxy beam in Stranski-Krastanov method. In order to study the structural and optical properties of InAlAs/AlGaAs QDs, atomic force microscopy (AFM) and photoluminescence (PL) measurements are conducted. The size and uniformity of QDs have been observed from the AFM images. The average widths and heights of QDs are increased as the deposition time increases. The PL spectra of QDs are composed of two peaks. The PL spectra of QDs were analyzed by the excitation laser power- and temperature-dependent PL, in which two PL peaks are attributed to two predominant sizes of QDs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.541-541
• /
• 2012

InP quantum dots capped by myristic acid (InP-MA QDs) were synthesized by a typical hot injection method using MA as stablizing agent. The current density across the InP-MA QDs thin film which was fabricated by spin-coating method is about $10^{-4}A/cm^2$ at the electric field of 0.1 MV/cm from I-V measurement on a metal-insulator-metal (MIM) device. The low conductivity of the InP-MA QDs thin film is interpreted as due to the long interdistances among the dots governed by the MA molecules. Therefore, replacing the MA with thioacetic acid (TAA) by biphasic ligand exchange was conducted in order to obtain TAA capped InP QDs (InP-TAA). InP-TAA QDs were designed due to: 1) the TAA is very short molecule; 2) the thiolate groups on the surface of the InP-TAA QDs are expected to undergo condensation reaction upon thermal annealing which connects the QDs within the QD thin film through a very short linker -S-; and 3) TAA provides better passivation to the QDs both in the solution and thin film states which minimizing the effect of surface trapping states.

• 센서학회지
• /
• 제33권2호
• /
• pp.93-97
• /
• 2024

With the development of promising future mobility and urban air mobility (UAM) technologies, the demand for LIDAR sensors has increased. The SWIR photodetector is a sensor that detects lasers for the 3D mapping of lidar sensor and is the most important technology of LIDAR sensor. An SWIR photodetector based on QDs in an eye-safe wavelength band of over 1400 nm has been reported. QDs-based SWIR photodetectors can be synthesized and processed through a solution process and have the advantages of low cost and simple processing. However, the organic ligands of QDs have insulating properties that limit their ability to improve the sensitivity and stability of photodetectors. Therefore, the technology to replace organic ligands with inorganic ligands must be developed. In this study, the organic ligand of the synthesized PbS QDs was replaced with a MAPI inorganic ligand, and an SWIR photodetector was fabricated. The analysis of the characteristics of the manufactured photodetector confirmed that the photodetector based on MAPI-capped PbS QDs exhibited up to 26.5% higher responsivity than that based on organic ligand PbS QDs.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.571-574
• /
• 2012

In present study, CdSe quantum dots (QDs) were prepared with a novel but simple, effective and exercisable method. Nine different types of carbohydrate molecules were used to modify CdSe QDs. D-mannose (Man)-coated quantum dots were prepared for labeling human hepatoma (HepG2) cells, because of the high expression of mannose receptor (MR) on HepG2 cells. The uptake characteristics of CdSe QDs-Man were investigated in HepG2 cells. The absorption rate result of MTT assay in 48 h suggested the extremely low cytotoxicity of CdSe QDs-Man. The presence of quantum dots was confirmed with fluorescence microscopy. These results were encouraging regarding the application of QDs molecules for early detection of HepG2 cells.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.249.1-249.1
• /
• 2015

Quantum dots (QDs) are attracting growing attention for photovoltaic device applications because of their unique electronic, optical and physical properties. Lead sulfide (PbS) QDs are one of the most widely studied materials for the devices and known to have size-tunable properties. In this context, we investigated the relationship between the size of PbS QDs and two synthesizing conditions, a concentration of ligand, oleic acid in this work, and injection temperature. The inverted colloidal quantum dot solar cells based on the heterojunction of n-type zinc oxide layer and p-type PbS QDs were also fabricated. The size of the QDs and cell properties were observed to depend on both the QD synthesizing conditions, and hence the overall efficiency of the cell could vary even though the size of QDs used was same. The QD synthesizing conditions were finally optimized for the maximum cell efficiency.

• 세라미스트
• /
• 제10권3호
• /
• pp.7-14
• /
• 2007

PbS QDs in glasses have attracted much attention due to the potentials for near-infrared applications. Growth of PbS QDs in the glass is discussed and size of PbS QDs formed in the glass can be tuned by varying the thermal treatment conditions. Hyperbolic-band approximation and four-band envelope function provide good simulation of the exciton energies of PbS QDs. Absorption and photoluminescence of PbS QDs was tuned into $1{\sim}2{\mu}m$ wave-length regime with large full width at half maximum photoluminescence intensity (>160 nm). Photoluminescence intensity of PbS QDs in the glasses was closely related to size of quantum dots, temperature, excitation and defects. Decrease in temperature shifted the photoluminescence bands to shorter wavelength and switched the photoluminescence from darkened state and brightened state.

• Macromolecular Research
• /
• 제17권12호
• /
• pp.995-1002
• /
• 2009

Luminescent polynorbornene (PNB)/quantum dot (CdSe@ZnS; QD) composite nanorods and nanotubes were successfully prepared using anodic aluminum oxide (AAO) membranes of various pore sizes as templates. To protect QDs with high quantum yield from quenching during the phosphoric acid treatment used to remove the AAO templates, chemically stable and optically clear norbornene-maleic anhydride copolymers (P(NB-r-MA)) were employed as a capping agent for QDs. The amine-terminated QDs reacted with maleic anhydride moieties in P(NB-r-MA) to form PNB-grafted QDs. The chemical- and photo-stability of QDs encapsulated with PNB copolymers were investigated by photoluminescence (PL) spectroscopy. By varying the pore size of the AAO templates from 40 to 380 urn, PNB/QD composite nanorods or nanotubes were obtained with a good dispersion of QDs in the PNB matrix.