• Interaction and multiscale mechanics
• /
• v.1 no.3
• /
• pp.317-328
• /
• 2008

When carbon-filled rubber specimens are subjected to cyclic loading, they do not return to their initial state after loading and subsequent unloading, but exhibit a residual strain or permanent deformation. We propose a specific form of the pseudo-elastic energy function to represent cyclic loading for incompressible, isotropic materials with stress softening and residual strain. The essence of the pseudo-elasticity theory is that material behaviour in the primary loading path is described by a common elastic strain energy function, and in unloading, reloading or secondary unloading paths by a different strain energy function. The switch between strain energy functions is controlled by the incorporation of a damage variable into the strain energy function. An extra term is added to describe the permanent deformation. The finite element implementation of the proposed model is presented in this paper. All parameters in the proposed model and elastic law can be easily estimated based on experimental data. The numerical analyses show that the results are in good agreement with experimental data.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1466-1467
• /
• 2007

A new parameter W/R for the class I test have been introduced in the IEC 61643-1 published in 2005. One of the possible test impulses which meets the parameters for class I test is the 10/350 [${\mu}s$] waveshape proposed in IEC61312-1. 10/350 [${\mu}s$] waveshape meets parameters for class I test in the IEC 61643-1. The impulse generator for making the 10/350 [${\mu}s$] waveshape is consist of IVG, ICG, crowbar coil and crowbar switch. The electric change Q and the specific energy W/R were measured and calculated using the exclusive use measuring software according to the formula of IEC 611643-1. We verified the correspondence between measured results using impulse generator and recommended parameters by IEC 61643-1.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.220-221
• /
• 2016

This paper proposes an active switched-capacitor embedded quasi-Z-source inverter (ASC-EqZSI) topology. In order to improve boost ability, One diode and one switch device are added in the qZSI impedance network, and a single dc source is shifted in series with the inductor in the impedance network. The performances of the proposed topology are verified with simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.535-538
• /
• 1994

In this paper, an isolated ZVS-PWM boost converter is proposed for single stage line conversion. For power factor correction, we used the half bridge topology at the primary side of isolation transformer permitting switching devices to operate under ZVS by using circuit parastics and operating at a fixed duty ratio near 50%. Thus the relatively continuous input current distortion and small size input filter are also achievable. The ZVS-PWM boost operation of the proposed converter can be achieved by using the boost inductor $L_f$, main switch $Q_3$, and simple auxiliary circuit at the secondary side of isolation transformer. The secondary side circuit differ from a conventional PWM boost converter by introduction a simple auxiliary circuit. The auxiliary circuit is actived only during a short switching transition time to create the ZVS condition for the main switch as that of the ZVT-PWM boost converter. With a single stage, it is possible to achieve a sinusoidal line current at unity power factor as well as the isolated 48V DC output. Comparing to the two stage schemes, overall effiency of the proposed converter is highly improved due to the effective ZVS of all devices as well as single stage power conversion. Thus, it can be operated at high switching frequency allowing use of small size input filter. Minimum voltage and current stress make it high power application possible.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.5
• /
• pp.94-105
• /
• 2010

To detect faults in an inverter-fed permanent magnet synchronous motor (PMSM) drive under the circumstance having faults in a stator winding and inverter switch, an on-line basis fault detecting scheme during operation is presented. The proposed scheme is achieved by monitoring the second-order harmonic component in q-axis current and the fault is detected by comparing these components with those in normal conditions. The linear interpolation method is employed to determine the harmonic data in normal operating conditions. As soon as the fault is detected, the operating mode is changed to identify a fault type using the phase current waveform. To verify the effectiveness of the proposed fault detecting scheme, a test motor to allow inter-turn short in the stator winding has been built. The entire control algorithm is implemented using DSP TMS320F28335. Without requiring an additional hardware, the fault can be effectively detected by the proposed scheme during operation so long as the steady-state condition is satisfied.

• Journal of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.371-379
• /
• 1980

The spectral properties of the solvated electrons in tetrahydrofuran(THF)-water binary system have been investigated. In this study, the solvated electrons have been produced by applying nsec Q-switch Nd(YAG) laser photolysis technique. The experimental method photolysis were schematically described. The solvent and the temperature effects on the absorption spectrum of solvated electrons have also been studied. The observation of the spectrum with increasing THF content and temperatue showed a trend that the former shifted to longer wavelength and the other showed broadening effect. The half-life of solvated electrons were also increased with THF content. The absorption maxima of the mixtures were always observed in the middle of that of pure water and THF. The correlation between the volume and the absorption energy of solvated electrons were discussed from the results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.231-237
• /
• 2016

This paper presents a multiband low phase noise CMOS VCO with wide frequency tunability using switched bondwire inductor bank. The combination of bondwire inductor and CMOS switch transistor enhances frequency tunability and improves phase noise characteristics. The proposed multiband VCO operates from 2.3GHz to 6.3GHz with phase noise of -136dBc/Hz and -122dBc/Hz at 1 MHz offset frequency, respectively. Switched bondwire inductor bank shows high quality factor(Q) at each frequency band, which allows better tradeoff between phase noise and power consumption. The proposed VCO is designed in TSMC 0.18um CMOS process and consumes 7.2 mW power resulting in figure of merit(FOM) of -189.3dBc/Hz at 1 MHz offset from 6GHz carrier frequency.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1511_1512
• /
• 2009

This paper presents a polarization switching antenna integrated with silicon RF MEMS SPDT switches in the form of a package. A low-loss quartz substrate made of SoQ (silicon-on-quartz) bonding is used as a dielectric material of the patch antenna, as well as a packaging lid substrate of RF MEMS switches. The packaging/antenna substrate is bonded with the bottom substrate including feeding lines and RF MEMS switches by BCB adhesive bonding, and RF energy is transmitted from signal lines to antenna by slot coupling. Through this approach, fabrication complexity and degradation of RF performances of the antenna due to the parasitic effects, which are all caused from the packaging methods, can be reduced. This structure is expected to be used as a platform for reconfigurable antennas with RF MEMS tunable components. A linear polarization switching antenna operating at 19 GHz is manufactured based on the proposed method, and the fabrication process is carefully described. The s-parameters of the fabricated antenna at each state are measured to evaluate the antenna performance.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.70-77
• /
• 2004

In many industrial applications, an unexpected fault of induction motor drive systems can cause serious troubles such as downtime of the overall system heavy loss, and etc. As one of methods to solve such problems, this paper investigates the fault diagnosis for open-switch damages in a voltage-fed PWM inverter for induction motor drive. For the feature extraction of a fault we transform the current signals to the d-q axis and calculate mean current vectors. And then, for diagnosis of different fault patterns, we propose a clustering based diagnosis algorithm The proposed diagnostic technique is a modified ANFIS(Adaptive Neuro-Fuzzy Inference System) which uses a clustering method on the premise of general ANFIS's. Therefore, it has a small calculation and good performance. Finally, we implement the method for the diagnosis module of the inverter with MATLAB and show its usefulness.

• ETRI Journal
• /
• v.25 no.2
• /
• pp.65-72
• /
• 2003

To achieve cost and size reductions, we developed a low cost manufacturing technology for RF substrates and a high performance passive process technology for RF integrated passive devices (IPDs). The fabricated substrate is a conventional 6" Si wafer with a 25${\mu}m$ thick $SiO_2$ surface. This substrate showed a very good insertion loss of 0.03 dB/mm at 4 GHz, including the conductive metal loss, with a 50 ${\Omega}$ coplanar transmission line (W=50${\mu}m$, G=20${\mu}m$). Using benzo cyclo butene (BCB) interlayers and a 10 ${\mu}m$ Cu plating process, we made high Q rectangular and circular spiral inductors on Si that had record maximum quality factors of more than 100. The fabricated inductor library showed a maximum quality factor range of 30-120, depending on geometrical parameters and inductance values of 0.35-35 nH. We also fabricated small RF IPDs on a thick oxide Si substrate for use in handheld phone applications, such as antenna switch modules or front end modules, and high-speed wireless LAN applications. The chip sizes of the wafer-level-packaged RF IPDs and wire-bondable RF IPDs were 1.0-1.5$mm^2$ and 0.8-1.0$mm^2$, respectively. They showed very good insertion loss and RF performances. These substrate and passive process technologies will be widely utilized in hand-held RF modules and systems requiring low cost solutions and strict volumetric efficiencies.