• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.49-56
• /
• 2006

This paper describes the design and the verification of IEEE 802.15.4 LR-WPAN 2.4GHz Physical layer for Ubiquitous Sensor Network(USN). We designed the Carrier Frequency Offset(CFO) compensation satisfied the frequency tolerance of IEEE 802.15.4 LR-WPAN and the adaptive matched filter that re-setting of the threshold for the symbol synchronization of the various USN environment. The multiplications is reduced 1/16 by this method each other at i, q phases and has 0.5dB performance improvement in detection probability. Proposed baseband system is designed with verilog HDL and implemented using FPGA prototype board.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.4
• /
• pp.279-285
• /
• 2017

In this paper, the resonator with a parallel plate capacitor is newly proposed around sub-microwave frequency band and applied to earlobe for non-invasive glucose monitoring the human biological tissue. The capacitor including the earlobe as dielectric material is connected to inductive slot in the ground plane of the microstrip line. Based on the simulation, one port resonator circuit is designed and fabricated as a prototype. Three step glucose concentration levels(0, 250, 500 mg/dL) was tested, and its reflection coefficients($S_{11}$) were measured. Owing to high Q resonator more than 100, resonant frequency shift of about 9 MHz per glucose level of 250 mg/dL has been successfully measured. This proves that the proposed sensor is applicable to a blood glucose sensor.

• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.157-163
• /
• 2009

This study was conducted for the isolation, purification, and characterization of a protease from Korean pear, to see its proteolytic activity on chicken actomyosin and to find the optimum pH and temperature of activity on chicken actomyosin. The protease was isolated from crude extract of Korean pear by ammonium sulfate precipitation. Further purification was done by DEAE-Sepharose ion-exchange chromatography, Mono-Q and Mini-Q column chromatography. The purified enzyme gave a single protein band on SDS polyacrylamide gel electrophoresis and the molecular weight was found to be 38 kDa. The specific activity of purified enzyme was 34,907 unit/mg with 25 fold purification and the yield was 2%. The purified enzyme incubated with chicken actomyosin showed high activity. The optimum pH and temperature for enzyme activity on chicken actomyosin were 6.5 and $70^{\circ}C$, respectively. A protease was purified from Korean pear for the first time and characterized. It was found to be promising for meat tenderization.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1169-1178
• /
• 1998

This study was performed to purify fig pectinesterase(F-PE) and characterize its in situ activity. Three kinds of F-PE were partially separated by using ammonium sulfate fractionation, Q-Sepharose column, CM-cation exchanger column chromatography, and HPLC. One of those was anionic protein and the others were cationic proteins. All of them had approximate molecular weight of 27,000 and lost rapidly their activity during storage. Therefore alternative crude enzyme was prepared by suspending the freeze dried and milled fig powder in 0.1 M NaCl at pH 7.5. F-PE had the optimum pH of 8.5, the optimum temperature of $50^{\circ}C$ with activation energy of 7,671 cal $mol^{-1}K^{-1}$ and stability up to $55^{\circ}C$ with 10 minutes heating. Optimum activity was obtained in $0.2{\sim}0.4$ M NaCl with optimum solubility at above 0.8 M NaCl.

• Journal of Mushroom
• /
• v.17 no.4
• /
• pp.185-190
• /
• 2019

Pleurotus ostreatus No.42, known as the ligninolytic basidiomycetes, showed production of MnP and Lac, but did not show any LiP acitivity in static culture, grown in GPYW liquid medium. Maximum production of MnP (80U/flask) was observed on day 11 of culturing in this medium. Chromatographic purification of MnP included the use of Sepharose CL-6B and Mono-Q. The major MnP isozyme purified by column chromatography was observed to be a 36.4 KDa (single band on SDS PAGE). The 19-amino acid sequence from the N-terminal was determined by protein sequencing to be ATCADGRTTANAACCVLFP. The N-terminal sequence of the major MnP isozyme of P. ostreatus No.42 was found to be the same as a previously reported sequence of an MnP3 isozyme from this fungus.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.8
• /
• pp.89-98
• /
• 2020

This study applied the Q methodology to analyze the subjective evaluation and recognition patterns of elderly women's clothing preferences. For the type 1, knitted materials and natural materials were preferred, and pastel colors were preferred. The type 2 preferred pants that cover the body shape, look young, and have good simple activity. The type 3 was a type in which the waist was treated with a rubber band, the clothes were comfortable to wear and the loose style was preferred. The type 4 was simple and prefers a style with a raised neck and no fasteners, and a clothes that was comfortable to wear. Type 5 was a type that prefers a style that looks important and colorful and youthful in design or color. In order to develop ZIGTECHnology apparel for older women, it is necessary to develop a design that can look aesthetically beautiful while covering the body shapes such as bending of the back and bending of the waist by reflecting the preferences of the older women. It is considered that it is necessary to develop clothing that takes into consideration movement functionality without obstacles to movements in consideration of changes in behavior and movement of hands.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.4
• /
• pp.325-336
• /
• 2013

FlashLinQ, one of the typical D2D communication systems developed by Qualcomm, considers a single-tone communication based distributed channel-aware link scheduling method to realize the link scheduling process with low control overheads. However, considering the frequency selective fading effect of practical multi-path channel, the single-tone based SIR estimation causes a critical scheduling error problem because the received single-tone signal has quite different channel gain at each sub-carrier location. In order to overcome this problem, we propose a novel link scheduling method based on CAZAC (Constant Amplitude Zero Auto-Correlation) sequence for D2D communication system. In the proposed method, each link has a unique offset value set for the generation of CAZAC sequences. CAZAC sequences with the cyclic offsets are transmitted using multiple sub-blocks in the entire bandwidth, and then each device can obtain nearly full-band SIR using a good cyclic cross-correlation property of CAZAC sequence.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.80.1-80.1
• /
• 2019

Photometric investigations of asteroids allow us to determine their rotation states and shape models (Apostolovska et al. 2014). Our main target, asteroid (2078) Nanking's perihelion distance (q) is 1.480 AU, which belongs to the Mars-crossing asteroid (1.3 < q < 1.66 AU). Mars-crossing asteroids are objects that cross the orbit of Mars and regarded as one of the primary sources of near-Earth asteroids due to the unstable nature of their orbits. We present the analysis of the spin parameters and 3D shape model of (2078) Nanking. We conducted Cousins_R-band time-series photometry of this asteroid from November 26, 2014 to January 17, 2015 at the Sobaeksan Optical Astronomy Observatory (SOAO) and for 25 nights from March to April 2016 using the Korea Microlensing Telescope Network (KMTNet) to reconstruct its physical model with our dense photometric datasets. Using the lightcurve inversion method (Kaasalainen & Torppa 2001; Kaasalainen et al. 2001), we determine the pole orientation and shape model of this object based on our lightcurves along with the archival data obtained from the literatures. We derived rotational period of 6.461 h, the preliminary ecliptic longitude (${\lambda}_p$) and latitude (${\beta}_p$) of its pole as ${\lambda}_p{\sim}8^{\circ}$ and ${\beta}_p{\sim}-52^{\circ}$ which indicates a retrograde rotation of the body. From the apparent W UMa-shaped lightcurve and its location in the rotation frequency-amplitude plot of Sheppard and Jewitt (2004), we suspect the contact binary nature of the body (Choi 2016).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.2
• /
• pp.139-146
• /
• 2021

In hybrid rocket combustion, the oxidizer swirl injection is frequently used to stabilize the combustion as the rotational velocity component affects the boundary layer flow. However, as the swirl strength increases, a problem arises where the combustion performance changes too much. Thus, this study attempts to control the low frequency instability while minimizing the change in combustion performance by adapting attenuated swirl injection with fuel insert used in reference [7]. To this end, a series of experimental tests were performed by varying swirl intensity and the location of the fuel insert. In the tests, the occurrence of combustion instability and combustion performance were closely monitored. The results confirmed that combustion instability was successfully suppressed at the condition of the swirl angle 6 degree and the location of fuel insert 310 mm. And, the changes in combustion pressure, O/F ratio, and fuel regression rate were found as minimal compared to the baseline case. Also the results reconfirmed that the formation of positive coupling between two high frequency oscillations in 500 Hz band, combustion pressure(p') and heat release oscillation(q'), is the necessary and sufficient condition of the occurrence of low frequency instability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.210-211
• /
• 2009

In this study, we propose characteristics improvement methods according to via hole plating method for FBAR Duplexer with US PCS($T_x$:1850MHz~1910MHz, $R_x$:1930MHz~1990MHz) bandwidth which is used for wireless systems. Also, we designed and fabricated 3.8*3.8*1.8mm size microminiature FBAR Duplexer based on this proposal. First of all, in this study, we fabricated pentagon shape resonators by different size to make filter combination, and their quality factor(Q) are 687 with 6.6% of $k_{eff}^2$. Using this resonators, designed 3*2Type $T_x$ filter and 3*4Type $R_x$ filter. The transmission line, which works as phase shifter, is designed with $210{\mu}m$ in width and 18mm in length Stripline type. Inductor, which is used for matching component, is designed with width of $75{\mu}m$, a technically achievable minimum width. And adopted plating method of filling via hole with conductive epoxy for improved grounding and thermal conductivity. Using these configuration with all of the matching component values, we found Duplexer characteristics of -1.57dB ~ -1.73dB in insertion loss, -56dB in attenuation at 1850MHz~1910MHz of $T_x$ band. Also, found -2.71 dB ~ -3.23dB in insertion loss, -58dB in attenuation at 1930MHz~1990MHz of $R_x$ band.