• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.323-323
• /
• 2010

Saw damage of crystalline silicon wafer is unavoidable factor. Usually, alkali treatment for removing the damage has been carried out as the saw damage removal (SDR) process for priming the alkali texture. It usually takes lots of time and energy to remove the sawed damages for solar grade crystalline silicon wafers We implemented two different mixed acidic solution treatments to obtain the improved surface structure of silicon wafer without much sacrifice of the silicon wafer thickness. At the first step, the silicon wafer was dipped into the mixed acidic solution of $HF:HNO_3$=1:2 ration for polished surface and at the second step, it was dipped into the diluted mixed acidic solution of $HF:HNO_3:H_2O$=7:3:10 ratio for porous structure. This double treatment to the silicon wafer brought lower reflectance (25% to 6%) and longer carrier lifetime ($0.15\;{\mu}s$ to $0.39\;{\mu}s$) comparing to the bare poly-crystalline silicon wafer. With optimizing the concentration ratio and the dilution ratio, we can not only effectively substitute the time consuming process of SDR to some extent but also skip plasma enhanced chemical vapor deposition (PECVD) process. Moreover, to conduct alkali texture for pyramidal structure on silicon wafer surface, we can use only nitric acid rich solution of the mixed acidic solution treatment instead of implementing SDR.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.105-110
• /
• 2011

The doping procedure in crystalline silicon solar cell fabrication usually contains oxygen injection during drive-in process and removal of phosphorous silicate glass(PSG). In this paper, we studied the effect of oxygen injection and PSG on conversion efficiency of solar cell. The mono crystalline silicon wafers with $156{\times}156mm^2$, $200{\mu}m$, $0.5-3.0{\Omega}{\cdot}cm$ and p-type were used. After etching $7{\mu}m$ of the surface to form the pyramidal structure, the P(phosphorous) was injected into silicon wafer using diffusion furnace to make the emitter layer. After then, the silicon nitride was deposited by the PECVD with 80 nm thickness and 2.1 refractive index. The silver and aluminium electrodes for front and back sheet, respectively, were formed by screen-printing method, followed by firing in 400-425-450-550-$880^{\circ}C$ five-zone temperature conditions to make the ohmic contact. Solar cells with four different types were fabricated with/without oxygen injection and PSG removal. Solar cell that injected oxygen during the drive-in process and removed PSG after doping process showed the 17.9 % conversion efficiency which is best in this study. This solar cells showed $35.5mA/cm^2$ of the current density, 632 mV of the open circuit voltage and 79.5 % of the fill factor.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.1
• /
• pp.37-43
• /
• 2011

In this paper, the optimized doping condition of crystalline silicon solar cells with $156{\times}156\;mm^2$ area was studied. To optimize the drive-in temperature in the doping process, the other conditions except variable drive-in temperature were fixed. These conditions were obtained in previous studies. After etching$7\;{\mu}m$ of the surface to form the pyramidal structure, the silicon nitride deposited by the PECVD had 75~80nm thickness and 2 to 2.1 for a refractive index. The silver and aluminium electrodes for front and back sheet, respectively, were formed by screen-printing method, followed by firing in 400-425-450-550-$850^{\circ}C$ five-zone temperature conditions to make the ohmic contact. Drive-in temperature was changed in range of $830^{\circ}C$ to $890^{\circ}C$to obtain the sheet resistance $30{\sim}70\;{\Omega}/{\box}$ with $10\;\Omega}/{\box}$ intervals. Solar cell made in $890^{\circ}C$ as the drive-in temperature revealed 17.1% conversion efficiency which is best in this study. This solar cells showed $34.4\;mA/cm^2$ of the current density, 627 mV of the open circuit voltage and 79.3% of the fill factor.

• Applied Microscopy
• /
• v.30 no.3
• /
• pp.265-272
• /
• 2000

In this study, the brachial ganglion of Octopus minor was investigated with light microscope and electron microscope,andthefollowingresultswereobtained. The brachial ganglions of the octopus, round in shapes , are located under each of suckers. Their sizes are proportional to those of the suckers. A brachial ganglion of round shape consists of cortex and medulla. In cortex, nerve cells exist collectively while neuropiles in medulla. Three kinds of nerve cells (large, middle, and small neurons) are found in the cluster of nerve cells. The small one is a round cell of about $0.9{\mu}m$ in diameter while the middle and large ones are an elliptical cell of $1.6\times1.3{\mu}m$ and an ovoid cell of $2.8{\mu}m$ in diameter, respectively. All of those cells look light due to their low electron densities , in which cell organelle are not well developed. It was also observed that the middle neurons are surrounded by median electron-dense neuroglial cells of pyramidal shapes and about $0.6\times0.4{\mu}m$ in sizes. In the neuropiles of medulla, dendrites and axons of various sizes make a complex net. They contain four kinds of chemical synaptic vesicles-electron-dense synaptic vesicle of 100 nm in diameter, median electron-dense synaptic vesicle of 90 nm in diameter, electron-dense cored synaptic vesicle of 90 nm in diameter, and electron-lucent synaptic vesicle of 50 nm in diameter.

• The Journal of Korean Medicine
• /
• v.29 no.5
• /
• pp.29-40
• /
• 2008

Objectives : It has been reported that Sophorae Subprostratae Radix (SSR) has a neuroprotective effect on cerebral ischemia in animals. In the present study, the authors investigated the neuroprotective effect of SSR on glutamate excitotoxicity. Glutamate excitotoxicity was induced by using NMDA, AMPA, and KA in PC12 cells and in organotypic hippocampal slice cultures. Methods :Methanolic extract of SSR was added at 0.5, 5, and 50 ${\mu}$g/ml to culture media for 24 hours. The effects of SSR were evaluated by measuring of cell viability, PI-stained neuronal cell death, TUNEL-positive cells, and MAP-2 immunoreactivity. Results : SSR increased PC12 cell viabilities significantly against AMPA-induced excitotoxicity, but not against NMDA-induced or KA-induced excitotoxicity. In organotypic hippocampal slice cultures damaged by NMDA-induced excitotoxicity, SSR attenuated neuronal cell death significantly in the CA1, CA3, and DG hippocampal regions and reduced TUNEL-positive cells significantly in CA1 and DG regions. In organotypic hippocampal slice cultures damaged by AMPA-induced excitotoxicity, SSR attenuated neuronal cell death and reduced TUNEL-positive cell numbers significantly in the CA1 and DG regions. In organotypic hippocampal slice cultures damaged by KA-induced excitotoxicity, SSR attenuated neuronal cell death significantly in CA3, but did not reduce TUNEL-positive cell numbers in CA1, CA3 or DG. In organotypic hippocampal slice cultures damaged by NMDA-induced excitotoxicity, SSR attenuated pyramidal neuron neurite retraction and degeneration in CA1. Conclusions : These results suggest that the neuroprotective effects of SSR are related to antagonistic effects on the NMDA and AMPA receptors of neuronal cells damaged by excitotoxicity and ischemia.

• The Korean Journal of Physiology and Pharmacology
• /
• v.2 no.3
• /
• pp.297-305
• /
• 1998

This study used in vivo intracellular recording in rat hippocampus to evaluate the effect of lidocaine and MK-801 on the membrane properties and the synaptic responses of individual neurons to electrical stimulation of the commissural pathway. Cells in control group typically fired in a tonic discharge mode with an average firing frequency of $2.4{\pm}0.9$ Hz. Neuron in MK-801 treated group (0.2 mg/kg, i.p.) had an average input resistance of $3.28{\pm}5.7\;M{\Omega}$ and a membrane time constant of $7.4{\pm}1.8$ ms. These neurons exhibited $2.4{\pm}0.2$ ms spike durations, which were similar to the average spike duration recorded in the neurons of the control group. Slightly less than half of these neurons were firing spontaneously with an average discharge rate of $2.4{\pm}1.1$ Hz. The average peak amplitude of the AHP following the spikes in these groups was $7.4{\pm}0.6$ mV with respect to the resting membrane potential. Cells in MK-801 and lidocaine treated group (5 mg/kg, i.c.v.) had an average input resistance of $3.45{\pm}6.0\;M{\Omega}$ and an average time constant of $8.0{\pm}1.4$ ms. The cells were firing spontaneously at an average discharge rate of $0.6{\pm}0.4$ Hz. Upon depolarization of the membrane by 0.8 nA for 400 ms, all of the tested cells exhibited accommodation of spike discharge. The most common synaptic response contained an EPSP followed by early-IPSP and late-IPSP. Analysis of the voltage dependence revealed that the early-IPSP and late-IPSP were putative $Cl^--and\;K^+-dependent$, respectively. Systemic injection of the NMDA receptor blocker, MK-801, did not block synaptic responses to the stimulation of the commissural pathway. No significant modifications of EPSP, early-IPSP, or late-IPSP components were detected in the MK-801 and/or lidocaine treated group. These results suggest that MK-801 and lidocaine manifest their CNS effects through firing pattern of hippocampal pyramidal cells and neural network pattern by changing the synaptic efficacy and cellular membrane properties.

• The Korean Journal of Zoology
• /
• v.31 no.2
• /
• pp.111-121
• /
• 1988

This study was attempted to investigate the regional distribution and shapes of pancreatic endocrifle cells in the hedgehog, Erinaceus koneanus by the immunocytochemical PAP methods (Nalane, 1968; Stemberger, 1979). The tissue specimen taken from the splenic and duodenal regions of pancreas(proximai, middle and distal portions, respectively) were fixed with Bouin solution and the sections(5$\mu$ m) were followed by simple and double staining with 2 substrates, DAB and 4-CI-1-naphthol. The results were as following: Glucagon(A) cells, 13 $\mu$ m x 9.5 $\mu$ m in size, were found in the islets periphery and among the exocrine parenchyma. A cells were abundant in all the portions of splenic region and distal portion of duodenal region in contrast to a few in the proximal and middle portion of duodenal region. The shapes of the A cells were round, oval and pyramidal types. Insulin(B) cells, 11.6$\mu$m x 9.4$\mu$m in sise, were round or oval in shape and located throughout the islets. B cells were the most numerous cell types in all portions of splenic region and distal protion of duodenal region as compared with the other portions. Somatostatin(D) cells, 12.6$\mu$m x 9.1 $\mu$m in size, were round or oval in shape and found in the islets periphery and scattered in the exocrine parenchyma. These cells were rare in all the portions of splenic and duodenal region. Pancreatic polypeptide(PP) cells of various type, 12.8$\mu$ m x 8.5 $\mu$ m in size, were found in the islets periphery and among the exocrine parenchyma. PP cells were numerous in the proximal and middle portion of duodenal region, but rarely scattered in the other portions.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.175-175
• /
• 1996

The spinal dorsal horn is the area where primary afferent fibers terminate and cutaneous sensory information is Processed. A number of putative neurotransmitter substances, including excitatory and inhibitory amino acids and peptides, are present in this region and sites and cellular mechanisms of their actions have been a target of numerous studies. In this study, single neurons were acutely isolated and the properties of whole cell current and responses to excitatory and inhibitory neurotransmitters were studied by the patch clamp method. Young rats (7-14 days) were anesthetized with diethyl-ether, and the lumbar spinal cord was excised and cut transversely at a thickness of 30$\mu\textrm{m}$ by Vibroslicer. The treatment of spinal slices with low concentration of proteases (pronase and thermolysin 0.75 mg/$m\ell$) and mechanical dissociation yielded isolated neurons with near intact morphology. Multipolar, ellipsoidal and bipolar, and pyramidal cells were shown. By applying step voltage pulses to neurons held at -70 mV, two types of inward currents and one outward currents observed. The fast activating and inactivating inward current was the Na$\^$+/ current because of its fast kinetics and blocking by 0.5${\mu}$M TTX, a specific blocker of Na$\^$+/ channel. The second type of inward currents were sustained. Based on their kinetics and current-voltage relations, it was likely that the second type of inward current was the voltage-dependent Ca$\^$2+/ current. In the presence of TTX, the steady-state currents mainly represented outward K$\^$+/ current which looked like the delayed rectifier K$\^$+/ current. In addition, the membrane currents produced by agonist of excitatory amino acid (EAA) receptor and the endogenous transmitter candidate L-glutamate were recorded in isolated whole-cell voltage clamped neurons as well as responses to inhibitory amino acids (${\gamma}$-amino butyric acid, glycine). Drugs were applied by a method that allows complete exchange of the solution within 1 sec; an infinite number of solutions can be applied to a single cell.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.1
• /
• pp.59-65
• /
• 2012

A study on the electrical characteristic analysis of solar cell diodes under experimental conditions of varying temperature and frequency has been conducted. From the current-voltage (I-V) measurements, at the room temperature, we obtained the ideality factor (n) for Space Charge Region (SCR) and Quasi-Neutral Region (QNR) of 3.02 and 1.76, respectively. Characteristics showed that the value of n (at SCR) decreases with rising temperature and n (at QNR) increases with the same conditions. These are due to not only the sharply increased SCR current flow but the activated carrier recombination in the bulk region caused by defects such as contamination, dangling bonds. In addition, from the I-V measurements implemented to confirm the junction uniformity of cells, the average current dispersion was 40.87% and 10.59% at the region of SCR and QNR, respectively. These phenomena were caused by the pyramidal textured junction structure formed to improve the light absorption on the device's front surface, and these affect to the total diode current flow. These defect and textured junction structure will be causes that solar cell diodes have non-ideal electrical characteristics compared with general p-n junction diodes. Also, through the capacitance-voltage (C-V) measurements under the frequency of 180 kHz, we confirmed that the value of built-in potential is 0.63 V.

• Journal of Sensor Science and Technology
• /
• v.20 no.3
• /
• pp.207-212
• /
• 2011

In this study, pyramid structured black silicon process was developed in order to overcome disadvantages of using wet etching to texture the surface of single crystalline silicon and using grass/needle-like black silicon structure. In order to form the pyramidal black silicon structure on the silicon surface, the RIE system was modified to equip with metal-mesh on the top of head shower. The process conditions were : $SF_6/O_2$ gas flow 15/15 sccm, RF power of 200 W, pressure at 50 mTorr ~ 200 mTorr, and temperature at $5^{\circ}C$. The pressure did not affect the pyramid structure significantly. Increasing processing time increased the size of the pyramid, however, the size remained constant at 1 ${\mu}M$ ~ 2 ${\mu}M$ between 15 minutes ~ 20 minutes of processing. Pyramid structure of 1 ${\mu}M$ in size showed to have the lowest reflectivity of 7 % ~ 10 %. Also, the pyramid structure black silicon is more appropriate than the grass/needle-like black silicon when creating solar cells.