• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3295-3305
• /
• 2011

Thermal behavior of poly (methyl methacrylate) was analyzed in the presence of tin (IV) chloride. Five different proportions - polymer to additive - were selected for casting films from common solvent. TG, DTG and DTA were employed to monitor thermal degradation of the systems. IR and py-GC-MS helped identify the decomposition products. The blends start degrading at a temperature lower than that of the neat polymer and higher than that of the pure additive. Complex formation between tin of additive and carbonyl oxygen (pendent groups of MMA units) was noticed in the films soon after the mixing of the components in the blends. The samples were also heated at three different temperatures to determine the composition of residues left after the expulsion of volatiles. The polymer, blends and additive exhibited a one step, two-step and three-step degradation, respectively. $T_0$ is highest for the polymer, lowest for the additive and is either $60^{\circ}C$ or $70^{\circ}C$ for the blends. The amount of residue increases down the series [moving from blend-1 (minimum additive concentration) to blend-5 (maximum additive concentration)]. For blend-1, it is 7% of the original mass whereas it is 16% for blend-5. $T_{max}$ also goes up as the concentration of additive in the blends is elevated. The complexation appears to be the cause of observed stabilization. Some new products of degradation were noted apart from those reported earlier. These included methanol, isobutyric acid, acid chloride, etc. Molecular-level mixing of the constituents and "positioning effect" of the additive may have brought about the formation of new compounds. Routes are proposed for the appearance of these substances. Horizontal burning tests were also conducted on polymer and blends and the results are discussed. Activation energies and reaction orders were calculated. Activation energy is highest for the polymer, i.e., 138.9 Kcal/mol while the range for blends is from 51 to 39 Kcal/mol. Stability zones are highlighted for the blends. The interaction between the blended parts seems to be chemical in nature.

• 한국환경과학회지
• /
• 제5권5호
• /
• pp.569-577
• /
• 1996

과잉수소 반응조건하에서 사염화탄소의 열적 안정성과 수첨탈염소화 과정을 고찰하기 위한 모델로써 Cl/H의 비가 다른 순수 염화메탄화합물인 메틸염소, 메틸렌염소, 클로로포름과 사염화탄소를 이용하였다. 반응시간 1초에서 99% 분해되는 온도를 기준으로한 열적 안정성은 메틸염소는 $875^{\circ}C,$ 메틸렌염소는 $780^{\circ}C,$ 클로로포름은 $675^{\circ}C,$ 사염화탄소는 $635^{\circ}C$ 이었으며, 낮은 반응온도영역에서는 클로로포름의 열적 안정성이 사염화탄소보다 낮았으나 온도가 증가함에 따라 사염화탄소의 분해가 증가하여 $570^{\circ}C$ 이상에서는 클로로포름보다 쉽게 분해되었다. 사염화탄소의 분해 반응계에서의 생성물 고찰결과, 반응온도가 증가함에 따라 염화탄화수소 화합물 계열 생성물의 농도와 염화정도가 감소하였다. 과잉수소 반응조건에서 사염화탄소 열분해 실험결과, $850^{\circ}C$ 이상에서는 탈염소화 탄화수소화합물인 메탄, 에틸렌, 에탄의 생성물의 농도가 증가하였으며 염소화 합물로는 메틸염소만이 소량 검출되었다. 이는 염화정도가 낮은 화합물일수록 열적 안정성이 크다는 것을 의미하며 CCl4/H2 반응계에서 염화탄소화합물중 메틸염소가 열적 안정성이 가장 큰 화합물이었다.

• 한국방사선학회논문지
• /
• 제8권7호
• /
• pp.383-387
• /
• 2014

본 연구에서는 선형가속기의 소조사면에 보다 정확한 선량계측이 가능하고, 빔 분포 영상화가 가능 계측시스템 개발을 위해 반도체화합물을 이용한 검출 센서를 제작하여 성능평가를 하였다. 센서 제작은 대면적 필름 형성을 위해 입자침전법을 이용하였다. 고에너지 X선에 대한 검출 특성은 암전류, 출력전류, 상승시간, 하강시간, 응답지연 측정을 통해 조사되었다. 측정 결과, $TiO_2$가 혼합된 $HgI_2$ 센서가 $PbI_2$, PbO, $HgI_2$ 보다 우수한 특성을 보였다. 선형가속기를 이용하여 선형성, 재현성 및 정확성 평가를 수행하였으며, 결과적으로 실제 임상에 적용되고 있는 선량 검출기와 감응 특성을 비교 시 재현성, 선형성 및 정확성 등에서 매우 우수한 특성을 나타내는 것을 확인할 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권2호
• /
• pp.280-285
• /
• 2006

The current study was conducted to investigate the relationship between stress related gene and meat quality in pigs. A total number of 212 three-way cross bred (Landrace-$Yorkshire{\times}Duroc$) and 38 Duroc were sampled from the Korean pig industry to determine genotype frequency of porcine stress syndrome (PSS) and heat shock protein 70 kDa (HSP70) genes and their relationship with carcass traits and longissimus meat quality. Screen of HSP70 was performed by the single strand conformation polymorphism (SSCP) technique. Based on the analysis of restriction fragment length polymorphism (RFLP) in ryanodine receptor 1 (RYR1) gene, genetic disorder of PSS was related to a mutation at $18,168^{th}$ (C to T) of exon 17. There was no significant difference in ultimate meat pH and backfat thickness between HSP70 K1-AA type and -BB type in pure Duroc breed. In Landrace-$Yorkshire{\times}Duroc$ (L-$Y{\times}D$) cross bred pig, our results indicated that HSP70 derivate type in Duroc had a limited effect on backfat thickness, but L-$Y{\times}D$ type had a noticeable linkage with HSP70 K1-AA and K3-AB. This tendency was also observed in hot carcass weight where HSP70 K1-AA and K3-AB resulted in heavier weight with 86.3 kg compared to HSP70 K1-AB and K3-BB of 74.3 kg. Results imply that stress related HSP70 genotype has a potential association with backfat thickness and carcass weight.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권7호
• /
• pp.943-954
• /
• 2009

Diacylglycerol acyltransferase (DGAT) is a key enzyme that catalyzes the final and rate-limiting step of triglyceride synthesis. Both DGAT1 and DGAT2 genes code proteins with DGAT activity. Studies have shown DGAT1 polymorphisms associate with intramuscular fat deposition in beef cattle, but fewer associations between DGAT2 and beef cattle economic traits have been reported. The objective of this study was to investigate single nucleotide polymorphism (SNP) in intron3 of bovine DGAT2 and evaluate the associations of that with carcass, meat quality, and fat yield traits. Test animals were 157 commercial feedlot steers belonging to 3 Chinese native breeds (22 for Luxi, 24 for Jinnan, and 23 for Qinchuan), 3 cross populations (20 for Charolais${\times}$Fuzhou, 18 for Limousin ${\times}$Luxi, and 17 for Simmental${\times}$Jinan) and 1 Taurus pure breed population (16 Angus steers). In the current study, 15 SNP were discovered in intron3 and exon4 of DGAT2 at positions 65, 128, 178, 210, 241, 255, 270, 312, 328, 334, 365, 366, 371, 415, and 437 (named as their positions in PCR amplified fragments). Only 7 of them (128, 178, 241, 270, 312, 328, and 371) were analyzed, because SNP in three groups (65-128-255, 178-210-365 and 241-334-366) were in complete linkage disequilibrium within the group, and SNP 415 was a deletion and 437 was a null mutation. Frequencies for rare alleles in the 3 native breed populations were higher than in the 3 cross populations for 178 (p = 0.04), 270 (p = 0.001), 312 (p = 0.03) and 371 (p = 0.002). A general linear model was used to evaluate the associations between either SNP genotypes or allele substitutions and the measured traits. Results showed that SNP 270 had a significant association with the fat yield associated with kidney, pelvic cavity, heart, intestine, and stomach (KPHISY). Animals with genotype CC and CT for 270 had less (CC: -7.71${\pm}$3.3 kg and CT: -5.34${\pm}$2.5 kg) KPHISY than animals with genotype TT (p = 0.02). Allele C for 270 was associated with an increase of -4.26${\pm}$1.52 kg KPHISY (p = 0.006) and $-0.92{\pm}0.45%$ of retail cuts weight percentage (NMP, Retail cuts weight/slaughter body weight) (p = 0.045); allele G for 312 was associated with an increase of -5.45${\pm}$2.41 kg KPHISY (p = 0.026). An initial conclusion was that associations do exist between DGAT2 gene and carcass fat traits. Because of the small sample size of this study, it is proposed that further effort is required to validate these findings in larger populations.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.183-183
• /
• 2014

Recently, multiferroic materials gain much attention due to their fascinating fundamental physical properties. These materials offer wide range of potential applications such as data storage, spintronic devices and sensors, where both electronic and magnetic polarizations can be coupled. Among single-phase multiferroic materials, $BiFeO_3$ is typical because of the room-temperature magnetoelectric coupling in view of long-range magnetic- and ferroelectric-ordering temperatures. However, $BiFeO_3$ is well known to have large leakage current and small spontaneous polarization due to the existence of oxygen vacancies and other defects. Furthermore the magnetic moment of pure $BiFeO_3$ is very weak owing to its antiferromagnetic nature. Recently, various attempts have been performed to improve the multiferroic properties of $BiFeO_3$ through the co-doping at the A and the B sites, by making use of the fact that the intrinsic polarization and magnetization are associated with the lone pair of $Bi^{3+}$ ions at the A sites and the partially-filled 3d orbitals of $Fe^{3+}$ ions at the B sites, respectively. In this study, $BiFeO_3$, $Bi_{0.9}Ho_{0.1}FeO_3$, $BiFe_{0.97}Ni_{0.03}O_3$ and $Bi_{0.9}Ho_{0.1}Fe_{0.97}Ni_{0.03}O_3$ bulk compounds were prepared by solid-state reaction and rapid sintering. High-purity $Bi_2O_3$, $Ho_2O_3$, $Fe_2O_3$ and $NiO_2$ powders with the stoichiometric proportions were mixed, and calcined at $500^{\circ}C$ for 24 h to produce the samples. The samples were immediately put into an oven, which was heated up to $800^{\circ}C$ and sintered in air for 1 h. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The field-dependent and temperature-dependent magnetization measurements were performed with a vibrating-sample magnetometer and superconducting quantum-interference device.

• Journal of Animal Science and Technology
• /
• 제44권6호
• /
• pp.727-738
• /
• 2002

본 시험은 각각의 필수아미노산 결핍사료 섭취에 의한 단기간의 섭식반응과 methionine 결핍(-Met) 사료 섭취시 뇌내 각 부위에 나타나는 Fos 면역반응을 조사하여 아미노산 결핍이 뇌내 섭식반응과 관련있는 부위를 명확히 알고자 수행하였다. 실험사료의 단백질원은 정제아미노산을 이용하였다. 시험에 이용된 모든 사료의 질소원은 순수 아미노산 혼합물을 이용하였으며, 사료내 단백질 함량은 15%로 하였다. 사료는 하루 6시간 동안 섭취하도록 적응을 시켰으며(17:00${\sim}$21:00, meal feeding method), 사료섭취량과 증체량은 사료급여 7일째부터 매시간 측정하였다. 실험 1에서는 각 필수아미노산 결핍사료가 사료섭취량, 체중 변화 및 섭식패턴에 미치는 영향을 관찰하였고, 실험 2에서는 Fos 면역조직 화학적 방법을 사용하여 methio- nine 결핍사료에 대하여 회피 반응을 나타내는 동안에 활성을 보이는 뇌의 영역을 확인하였다. 각 필수아미노산 결핍사료 섭취에 따른 초기 섭식 억제 정도는 methionine이 가장 강하게 나타난 반면 threonine이 가장 약하였다. 결핍사료 급여 3일째의 사료섭취량은 대조구 사료에 비하여 histidine(71%), leucine(68%), isoleucine (66%), threonine(63%), tryptophan(61%), valine (55%), phenylalanine(52%), methionine(51%), lysine(44%), arginine(24%) 순으로 억제되었다. 뇌 신경 영역에 Fos 면역활성은 PPC, amygdala 및 endopyriform cortex(EPC) 부분이 대조구에 비하여 강한 활성을 나타냈으나, LH, VMH 및 PVM에서는 대조구와 처리구가 비슷하게 나타냈다. 따라서 본 연구의 결과로 미루어 뇌내 PPC는 필수아미노산 결핍에 반응하는 초기 인식부위라는 것을 확인할 수 있었다.

• 한국광물학회지
• /
• 제26권4호
• /
• pp.299-312
• /
• 2013

홍천 카보나타이트-포스코라이트 복합체를 형성하는 주 구성광물인 자철석은 각각 세 시기에 걸쳐 정출되었으며 후기로 가면서 함량이 점차 감소한다. 자철석에 대한 전자현미분석결과 Ti, V은 미량 검출되지만 초기에서 후기로 가면서 증가하는 경향을 보여준다. 반면, Mg, Mn은 뚜렷이 감소하는데 이는 일반적인 카보나타이트질 마그마 분화특성을 잘 나타낸다. Al 또한 카보나타이트와 포스코라이트에서 감소하는 경향을 보여주며, Cr은 대부분 검출한계 미만을 나타내나 후기 포스코라이트에 와서는 미량 정출된다. 자철석은 초기에는 $Fe^{2+}$가 주로 $Mg{2+}$와 $Mn^{2+}$에 의해 치환되고, $Fe^{3+}$는 $Al^{3+}$에 의한 치환되는 양상이 주를 이루었으나 후기에 와서는 감소하면서 거의 순수한 자철석 조성을 갖게 된다. V의 증가와 Mn의 감소는 마그마 분화가 산소분압이 점차 감소하는 환경에서 진행되었음 나타내고, 감람석, 금운모의 부재와 더불어 자철석의 Mg, Al, Cr 및 Ti 원소들의 함량이 낮은 것은 홍천 카보나타이트-포스코라이트 복합체가 결핍된 모마그마로부터 생성되었음을 지시한다. 특히, 후기로 가면서 철질 탄산염광물과 석영의 산출이 두드러지면서 전형적인 카보나타이트-포스코라이트 복합체에 비해 연구지역 자철석의 Mg 함량이 적게 산출되는 것은 마그마 분화가 최후기까지 진행되었음을 시사한다.

• Journal of Pharmaceutical Investigation
• /
• 제6권3호
• /
• pp.58-69
• /
• 1976

It is well established that dissolution is freruently the rate limiting step in the gastrointestinal absorpton of a drug from a solid dosage from. The relationship between the dissolution rate and absorption is particularly distinct when considering drugs of low solubility. Consequently, numerous attempts have been made to modify the dissolution characteristics of poorly water soluble drugs. Since dissolution rate is directly proportional to surface area, one may increase the rate by decreasing the particle size of the drug. Levy has considered a number of methods by which a drug may be presented to the GI fludids in finely divided from. The direct method is the utilization of microcrystalline or micronized particles. A second method involves the administration of solutions from which, upon dilution with gastric fluids, the dissolved drug will precipitate in the form of very fine particles. A more unique way of obtaining microcrystalline dispersions of a drug has been ercently suggested by Sekiguchi et al. They have first proposed the formation of a eutectic mixture of a poorly water soruble drug with a physiologically inert, easily soluble carrier. When such systems are exposed to water or GI fluids, the soluble carrier will dissolve rapidly and the finely dispersed drug particles will then be released. It has been suggested by Shefter and Higuchi that the formation of crystalline solvate could be a powerful tool in affecting rapid disslution of highly insoluble substances. Goldberg et al. have noted that the formation of solid solution could reduce the particle size to a minimum and increase the dissolution rate as well as the solubility of the durgs. It has also been shown that the rates of solution of drugs were appreciably increased by coprectipitating the drug with soluble polymers. The increase was found to be sensitive to the method of preparation, the molecular weight of polymer and the particular ratio of drugs to polymer. Although several investigations have demontrated that the solubility and/or dissolution rates of drugs can be increased in this manner, little information is available in the literature related to the in vivo absorption pattern of drugs orally administered as PVP coprecipitates. Recently, however, it was demonstrated that both the rate and extent of absorption of the insoluble drug could be markedly enhanced when orally administered to rats in the form of a coprecipitate with PVP. The purpose of the present investigation was to ascertain the general appility of soluble polymer coprectation technique as a method for enhancing the in vitro dissolution rate of hydrophobic indomethacin. To accomplish this aim, the dissolution characteristics of pure indomethacin, indomethcin-polymer physical mixtures and indomethacin-polymer coprecipitates were quantitatively studied by comparing their relative dissolution rates. The solubility and dissolution behavior of these systems were also examined.

• 한국발생생물학회:학술대회논문집
• /
• 한국발생생물학회 2009년도 특별 Symposium
• /
• pp.49-57
• /
• 2009

The cloning of canids was succeeded in 2005, several years after the birth of Dolly the sheep and also after the cloning of numerous other laboratory and farm animal species. The delay of successful somatic cell nuclear transfer (SCNT)was due to the unique reproductive characteristics of the female dogin comparison to other domestic mammals, such as ovulation of immature canine oocyte and a requirement of 25 days for the completion of meiosis within the oviduct (Holst & Phemister, 1971). When the technology for the recovery of in vivo matured oocyte was established, the application of cloning also became possible and cloned dog offspring were obtained. This report summarizes the progress of technical procedures that are required for cloning canids and the application of this technique. The first cloned dog, Snuppy, was achieved using an in vivo-matured oocyte which was enucleated and transferred with an adult skin cell of male Afghan hound. After establishment of a criterion of well-matured oocyte for the improvement of SCNT efficiency, we obtained three cloned female Afghan hound and a toy poodle cloned from 14 year-old aged Poodle using SCNT through this factor. To date, cloned dogs appeared to be normal and those that have reached puberty have been confirmed to be fertile. Through application of canine SCNT technique, first, we demonstrated that SNCT is useful for conserving the breed of endangered animal from extinction through cloning of endangered gray wolves using inter-species SCNT and keeping the pure pedigree through the cloning of Sapsaree, a Korean natural monument. Secondly, we showed possibility of human disease model cloned dog and transgenic cloned dog production through cloning of red fluorescent protein expressing dog. Finally, SCNT can be used for the propagation of valuable genotypes for making elite seed stock and pet dog. In summary, dog cloning is a reproducible technique that offers the opportunity to preserve valuable genetics and a potential step towards the production of gene targeted transgenic cloned dogs for the study of human diseases.