• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3295-3305
• /
• 2011

Thermal behavior of poly (methyl methacrylate) was analyzed in the presence of tin (IV) chloride. Five different proportions - polymer to additive - were selected for casting films from common solvent. TG, DTG and DTA were employed to monitor thermal degradation of the systems. IR and py-GC-MS helped identify the decomposition products. The blends start degrading at a temperature lower than that of the neat polymer and higher than that of the pure additive. Complex formation between tin of additive and carbonyl oxygen (pendent groups of MMA units) was noticed in the films soon after the mixing of the components in the blends. The samples were also heated at three different temperatures to determine the composition of residues left after the expulsion of volatiles. The polymer, blends and additive exhibited a one step, two-step and three-step degradation, respectively. $T_0$ is highest for the polymer, lowest for the additive and is either $60^{\circ}C$ or $70^{\circ}C$ for the blends. The amount of residue increases down the series [moving from blend-1 (minimum additive concentration) to blend-5 (maximum additive concentration)]. For blend-1, it is 7% of the original mass whereas it is 16% for blend-5. $T_{max}$ also goes up as the concentration of additive in the blends is elevated. The complexation appears to be the cause of observed stabilization. Some new products of degradation were noted apart from those reported earlier. These included methanol, isobutyric acid, acid chloride, etc. Molecular-level mixing of the constituents and "positioning effect" of the additive may have brought about the formation of new compounds. Routes are proposed for the appearance of these substances. Horizontal burning tests were also conducted on polymer and blends and the results are discussed. Activation energies and reaction orders were calculated. Activation energy is highest for the polymer, i.e., 138.9 Kcal/mol while the range for blends is from 51 to 39 Kcal/mol. Stability zones are highlighted for the blends. The interaction between the blended parts seems to be chemical in nature.

• Journal of Environmental Science International
• /
• v.5 no.5
• /
• pp.569-577
• /
• 1996

pure compound chloromethanes; methyl chloride, methylene chloride, chloroform and The carbon tetrachloride were used as a model of chlorocarbon system with Cl/H ratio to investigate thermal stability and hydrodechlorination process of carbon tetrachloride under excess hydrogen atmosphere. The parent thermal stability on basis of temperature required for 99% destruction at 1 second no was evaluated as $875^{\circ}C$ for $CH_3Cl$, $780^{\circ}C$ for $CH_2Cl_2$, $675^{\circ}C$ for $CHCl_3$ and $635^{\circ}C$ for $CCl_4$. Chloroform was thermally less stable than $CCl_4$ at fairly low temperatures $(<570^{\circ}C).$ The lion of $CCl_4$ became more sensitive to increasing temperature, and $CCl_4$ was degraded CHCl3 at above $570^{\circ}C.$ The number and quantity of chlorinated products decreases with increasing temperature for the Product distribution of $CCl_4$ decomposition reaction system. Formation of non-chlorinated hydrocarbons such as $CH_4$, $C_2H_4$ and C_2H_6$ increased as the temperature rise and particularly small amount of methyl chloride was observed above $850^{\circ}C$ in $CC1_4$/$H_2$ reaction system. The less chlorinated products are more stable, with methyl chloride the most stable chlorocarbon in this reaction system.

• Journal of the Korean Society of Radiology
• /
• v.8 no.7
• /
• pp.383-387
• /
• 2014

In this paper, for a new detection system development with the better accurate dose evaluation and beam distribution imaging using the small field irradiation of linear accelerator, the compound semiconductor based detection sensors were fabricated and the performance evaluation was investigated. The special particle-in-binder sedimentation was used for a large area film sensor fabrication. The detection properties for high energy x-rays were investigated from a dark current, an output current, a rising time, a falling time, and response delay measurement. The experimental results, the $TiO_2$ mixed $HgI_2$ sensor showed the best electrical characteristics than $PbI_2$, PbO, pure $HgI_2$. Linearity, repeatability, and accuracy tests from LINAC were tested, the $TiO_2$ mixed $HgI_2$ sensor showed the better performance than the commercially available dosimetry devices.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.2
• /
• pp.280-285
• /
• 2006

The current study was conducted to investigate the relationship between stress related gene and meat quality in pigs. A total number of 212 three-way cross bred (Landrace-$Yorkshire{\times}Duroc$) and 38 Duroc were sampled from the Korean pig industry to determine genotype frequency of porcine stress syndrome (PSS) and heat shock protein 70 kDa (HSP70) genes and their relationship with carcass traits and longissimus meat quality. Screen of HSP70 was performed by the single strand conformation polymorphism (SSCP) technique. Based on the analysis of restriction fragment length polymorphism (RFLP) in ryanodine receptor 1 (RYR1) gene, genetic disorder of PSS was related to a mutation at $18,168^{th}$ (C to T) of exon 17. There was no significant difference in ultimate meat pH and backfat thickness between HSP70 K1-AA type and -BB type in pure Duroc breed. In Landrace-$Yorkshire{\times}Duroc$ (L-$Y{\times}D$) cross bred pig, our results indicated that HSP70 derivate type in Duroc had a limited effect on backfat thickness, but L-$Y{\times}D$ type had a noticeable linkage with HSP70 K1-AA and K3-AB. This tendency was also observed in hot carcass weight where HSP70 K1-AA and K3-AB resulted in heavier weight with 86.3 kg compared to HSP70 K1-AB and K3-BB of 74.3 kg. Results imply that stress related HSP70 genotype has a potential association with backfat thickness and carcass weight.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.7
• /
• pp.943-954
• /
• 2009

Diacylglycerol acyltransferase (DGAT) is a key enzyme that catalyzes the final and rate-limiting step of triglyceride synthesis. Both DGAT1 and DGAT2 genes code proteins with DGAT activity. Studies have shown DGAT1 polymorphisms associate with intramuscular fat deposition in beef cattle, but fewer associations between DGAT2 and beef cattle economic traits have been reported. The objective of this study was to investigate single nucleotide polymorphism (SNP) in intron3 of bovine DGAT2 and evaluate the associations of that with carcass, meat quality, and fat yield traits. Test animals were 157 commercial feedlot steers belonging to 3 Chinese native breeds (22 for Luxi, 24 for Jinnan, and 23 for Qinchuan), 3 cross populations (20 for Charolais${\times}$Fuzhou, 18 for Limousin ${\times}$Luxi, and 17 for Simmental${\times}$Jinan) and 1 Taurus pure breed population (16 Angus steers). In the current study, 15 SNP were discovered in intron3 and exon4 of DGAT2 at positions 65, 128, 178, 210, 241, 255, 270, 312, 328, 334, 365, 366, 371, 415, and 437 (named as their positions in PCR amplified fragments). Only 7 of them (128, 178, 241, 270, 312, 328, and 371) were analyzed, because SNP in three groups (65-128-255, 178-210-365 and 241-334-366) were in complete linkage disequilibrium within the group, and SNP 415 was a deletion and 437 was a null mutation. Frequencies for rare alleles in the 3 native breed populations were higher than in the 3 cross populations for 178 (p = 0.04), 270 (p = 0.001), 312 (p = 0.03) and 371 (p = 0.002). A general linear model was used to evaluate the associations between either SNP genotypes or allele substitutions and the measured traits. Results showed that SNP 270 had a significant association with the fat yield associated with kidney, pelvic cavity, heart, intestine, and stomach (KPHISY). Animals with genotype CC and CT for 270 had less (CC: -7.71${\pm}$3.3 kg and CT: -5.34${\pm}$2.5 kg) KPHISY than animals with genotype TT (p = 0.02). Allele C for 270 was associated with an increase of -4.26${\pm}$1.52 kg KPHISY (p = 0.006) and $-0.92{\pm}0.45%$ of retail cuts weight percentage (NMP, Retail cuts weight/slaughter body weight) (p = 0.045); allele G for 312 was associated with an increase of -5.45${\pm}$2.41 kg KPHISY (p = 0.026). An initial conclusion was that associations do exist between DGAT2 gene and carcass fat traits. Because of the small sample size of this study, it is proposed that further effort is required to validate these findings in larger populations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.183-183
• /
• 2014

Recently, multiferroic materials gain much attention due to their fascinating fundamental physical properties. These materials offer wide range of potential applications such as data storage, spintronic devices and sensors, where both electronic and magnetic polarizations can be coupled. Among single-phase multiferroic materials, $BiFeO_3$ is typical because of the room-temperature magnetoelectric coupling in view of long-range magnetic- and ferroelectric-ordering temperatures. However, $BiFeO_3$ is well known to have large leakage current and small spontaneous polarization due to the existence of oxygen vacancies and other defects. Furthermore the magnetic moment of pure $BiFeO_3$ is very weak owing to its antiferromagnetic nature. Recently, various attempts have been performed to improve the multiferroic properties of $BiFeO_3$ through the co-doping at the A and the B sites, by making use of the fact that the intrinsic polarization and magnetization are associated with the lone pair of $Bi^{3+}$ ions at the A sites and the partially-filled 3d orbitals of $Fe^{3+}$ ions at the B sites, respectively. In this study, $BiFeO_3$, $Bi_{0.9}Ho_{0.1}FeO_3$, $BiFe_{0.97}Ni_{0.03}O_3$ and $Bi_{0.9}Ho_{0.1}Fe_{0.97}Ni_{0.03}O_3$ bulk compounds were prepared by solid-state reaction and rapid sintering. High-purity $Bi_2O_3$, $Ho_2O_3$, $Fe_2O_3$ and $NiO_2$ powders with the stoichiometric proportions were mixed, and calcined at $500^{\circ}C$ for 24 h to produce the samples. The samples were immediately put into an oven, which was heated up to $800^{\circ}C$ and sintered in air for 1 h. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The field-dependent and temperature-dependent magnetization measurements were performed with a vibrating-sample magnetometer and superconducting quantum-interference device.

• Journal of Animal Science and Technology
• /
• v.44 no.6
• /
• pp.727-738
• /
• 2002

This study was conducted to investigate the effect of essential amino acid(EAA) deficient diets on short-term feeding response and the Fos expression in brain area when methionine deficiency diet fed, and thereby to know the mechanism of feed intake regulation. In all trials, experimental diets were formulated with pure amino acid mixture to level of 15% nitrogen. Rats were adapted to a 6-hr single-meal feeding per day(17:00${\sim}$21:00). Feed intake and body weight were monitored every hour after 7-day of feeding of individual EAA deficient diets in Exp. Ⅰ. In Exp. Ⅱ, Fos immuno- histochemistry was determined in various regions of brain to identify the regions that is related to suppressed feed intake following feeding methionine-deficient diet. Fos expression was examined to know the initial sensitive region in the brains of rats at 3h after feeding of the control and methionine deficient diet(-Met). Initial response to EAA deficiency diets was severely depressed in methionine deficiency diet, but the depression was low in threonine deficiency diet. However, the feed intake at 3rd day in rats was depressed in the order of His(71%), Leu(68%), Ile(66%), Thr(63%), Trp(61%), Val(55%), Phe(52%), Met(51%), Lys(44%) and Arg(24%). Fos immunoreaction in neural regions(PPC, amygdala and EPC) of pyrifrom cortex was increased in the -Met group more than in the control diet group, but those in LH, VMH and PVM were similar. Thus, based on these data, the PPC was identified as the initial response area in the -EAA diet.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.4
• /
• pp.299-312
• /
• 2013

Magnetite, a major constituent mineral of the Hongcheon carbonatite-phoscorite complex, was produced over three stages in each rock type and decreased in quantity toward the late stage. Electron microprobe analyses for magnetite revealed that Ti and V were detected in traces, but showed increasing tendency from early to late stage. On the contrary, Mg and Mn decreased distinctly, and it is the general differentiation trend of carbonatitic magma. Al also showed decreasing tendency in carbonatite and phoscorite, and Cr was mostly below detection limit except late phoscorite. In early stage, $Fe^{2+}$ was largely replaced by $Mg{2+}$ and $Mn^{2+}$, and $Fe^{3+}$ by $Al^{3+}$ in magnetite, but it has nearly pure composition in late stage. Tendency of increase in V and decrease in Mn toward late stage represents that magma differentiation progressed under the condition of decreasing oxygen fugacity. Low concentrations of Mg, Al, Cr and Ti, as well as the absence of olivine and phlogopite, suggest that the Hongcheon carbonatite-phoscorite complex was generated from depleted magma. Especially, lower concentrations of Mg in magnetite compared to other typical carbonatite-phoscorite complex, and abundant occurrence of Fe-carbonate minerals and quartz in late stage, suggest that magma differentiation of the Hongcheon carbonatite-phoscorite proceeded to the latest stage.

• Journal of Pharmaceutical Investigation
• /
• v.6 no.3
• /
• pp.58-69
• /
• 1976

It is well established that dissolution is freruently the rate limiting step in the gastrointestinal absorpton of a drug from a solid dosage from. The relationship between the dissolution rate and absorption is particularly distinct when considering drugs of low solubility. Consequently, numerous attempts have been made to modify the dissolution characteristics of poorly water soluble drugs. Since dissolution rate is directly proportional to surface area, one may increase the rate by decreasing the particle size of the drug. Levy has considered a number of methods by which a drug may be presented to the GI fludids in finely divided from. The direct method is the utilization of microcrystalline or micronized particles. A second method involves the administration of solutions from which, upon dilution with gastric fluids, the dissolved drug will precipitate in the form of very fine particles. A more unique way of obtaining microcrystalline dispersions of a drug has been ercently suggested by Sekiguchi et al. They have first proposed the formation of a eutectic mixture of a poorly water soruble drug with a physiologically inert, easily soluble carrier. When such systems are exposed to water or GI fluids, the soluble carrier will dissolve rapidly and the finely dispersed drug particles will then be released. It has been suggested by Shefter and Higuchi that the formation of crystalline solvate could be a powerful tool in affecting rapid disslution of highly insoluble substances. Goldberg et al. have noted that the formation of solid solution could reduce the particle size to a minimum and increase the dissolution rate as well as the solubility of the durgs. It has also been shown that the rates of solution of drugs were appreciably increased by coprectipitating the drug with soluble polymers. The increase was found to be sensitive to the method of preparation, the molecular weight of polymer and the particular ratio of drugs to polymer. Although several investigations have demontrated that the solubility and/or dissolution rates of drugs can be increased in this manner, little information is available in the literature related to the in vivo absorption pattern of drugs orally administered as PVP coprecipitates. Recently, however, it was demonstrated that both the rate and extent of absorption of the insoluble drug could be markedly enhanced when orally administered to rats in the form of a coprecipitate with PVP. The purpose of the present investigation was to ascertain the general appility of soluble polymer coprectation technique as a method for enhancing the in vitro dissolution rate of hydrophobic indomethacin. To accomplish this aim, the dissolution characteristics of pure indomethacin, indomethcin-polymer physical mixtures and indomethacin-polymer coprecipitates were quantitatively studied by comparing their relative dissolution rates. The solubility and dissolution behavior of these systems were also examined.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2009.02a
• /
• pp.49-57
• /
• 2009

The cloning of canids was succeeded in 2005, several years after the birth of Dolly the sheep and also after the cloning of numerous other laboratory and farm animal species. The delay of successful somatic cell nuclear transfer (SCNT)was due to the unique reproductive characteristics of the female dogin comparison to other domestic mammals, such as ovulation of immature canine oocyte and a requirement of 25 days for the completion of meiosis within the oviduct (Holst & Phemister, 1971). When the technology for the recovery of in vivo matured oocyte was established, the application of cloning also became possible and cloned dog offspring were obtained. This report summarizes the progress of technical procedures that are required for cloning canids and the application of this technique. The first cloned dog, Snuppy, was achieved using an in vivo-matured oocyte which was enucleated and transferred with an adult skin cell of male Afghan hound. After establishment of a criterion of well-matured oocyte for the improvement of SCNT efficiency, we obtained three cloned female Afghan hound and a toy poodle cloned from 14 year-old aged Poodle using SCNT through this factor. To date, cloned dogs appeared to be normal and those that have reached puberty have been confirmed to be fertile. Through application of canine SCNT technique, first, we demonstrated that SNCT is useful for conserving the breed of endangered animal from extinction through cloning of endangered gray wolves using inter-species SCNT and keeping the pure pedigree through the cloning of Sapsaree, a Korean natural monument. Secondly, we showed possibility of human disease model cloned dog and transgenic cloned dog production through cloning of red fluorescent protein expressing dog. Finally, SCNT can be used for the propagation of valuable genotypes for making elite seed stock and pet dog. In summary, dog cloning is a reproducible technique that offers the opportunity to preserve valuable genetics and a potential step towards the production of gene targeted transgenic cloned dogs for the study of human diseases.