• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.3
• /
• pp.82-84
• /
• 2008

A surface encoder based on the Half-shaded square pattern (HSSP) is presented. The HSSP working as reference grid is composed of the straight lines which are easy to be fabricated and make measuring time short. Since the periodic cell is separated in ON/OFF by the $45^{\circ}$ straight line, the duration from the starting point of scanning to the first rising edge and the duty cycle of the pulse train vary with respect to the position of the starting point. And the relationship between X and Y position and the duration, and duty cycle is described in the simple linear equation. Therefore, it is possible to measure X and Y position with the measured duration and duty cycle without calculating load. Through the test set-up, the feasibility of the proposed surface encoder was verified. Also the future works for improvement of performance were suggested.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.4
• /
• pp.47-56
• /
• 1995

In this paper the model of the MQE-IMD-based neural trigger circuit is improved, where MQW-IMD is a new semiconductor device proposed and experimentally demonstrated by the author for the hardware implementation of the neural networks. The electron energy of AlXGa1-XAsbarrier is calculated by Ensemble Monte Carlo simulation according to the variation of Al mole fraction x and the applied electric field, whtich had been roughly estimated in the previous paper because of the difficulty to get the data. And in the consideration of the tunneling of the confined electrons within the quantum well the accuracy of the impact ionization rate is enhaned. Finally, the dependance of the frequency of pulse-train on the number of quantum wells can be calculated by modelling the effect of the distance of the induced positive charge from the cathode on the electric field at the cathode.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1729-1734
• /
• 2007

Recently, as the feasibility study shows that trans-Korea railway and trans-continental railway are advantageous, interest in high-speed railway system is increasing. Because railway vehicle is environment-friendly and safe compared with airplane and ship, its market-sharing increases gradually. We developed a measurement system for on-line test and evaluation of performances of KHST. The measurement system is composed of software part and hardware part. Perfect interface between multi-users is possible. Nowadays, position data inputs to pulse signal from wheel. Perfect position measurement was limited to slip and slide of vehicle. This measurement makes up for the weak points, Position Detection System using GPS develops. By using the system, Korean High Speed Train is capable of accurate fault position detection.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.213-219
• /
• 2010

MCU(Micro Controller Unit) used for the automobiles has been required for improving of the safety and high reliability. Also, the necessity of high performance MCU equipped with high fuel-efficiency has been risen according to increased requests of high fuel-efficiency and improving the occupants safety with the development of intelligent vehicles and future vehicles. The MPC5554 32-bit embedded controller, made by Freescale Semiconductor, specialized in the part of the power train provides the high reliability, fast interrupt process and real-time control. In This paper, the investigation on IPMSM using MPC5554 has been performed. Also SVPWM(Space Vector Pulse Width Modulation) is implemented to the servo system.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.507-511
• /
• 1999

A 10 GHz timing extracted signal which is phase-locked to a 10 Gbit/s mode-locked optical fiber laser pulse train is obtained using a tour-wave-mixing signal in semiconductor optical amplifier. The phase-locked loop wm, demonstrated ~Llccessful1y over 8 hours and found to have the lock-in frequency range of 30 KHz. 0 KHz.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1102-1107
• /
• 2000

The signals that can be obtained from a rotating machine often convey the information of machine. For example, if the machine under investigation has faults, then we can measure the signal which has a pulse train, embedded in noise. Therefore the ability to detect the fault signal in noise determines the degree of diagnosis level of rotating machine. In this paper, minimum variance cepstrum (MV cepstrum), which can easily detect impulse in noise, has been applied to detect the type of faults of ball bearing system. To test the performance of this technique, experiment has been performed for ball bearing elements that have man made faults. Results show that minimum variance cepstrum can easily detect the periodicity due to faults.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.245-248
• /
• 2008

This paper gives a description of the mode'ling and control of a single phase PWM(Pulse Width Modulation) converter for HEMU-400X(High-speed Electric Multiple Unit - 400 km/h experiment). The converter is part of a Auxiliary power unit supplied by the 25[kV], 60[Hz] overhead line. A model of the converter in a synchronously rotating reference frame of coordinates is used to develop a new type of control. The control system has separate controllers for the active and reactive current, permitting the free choice of the power factor. This paper proposes a new control method of PWM converter for Auxiliary power unit.

• Electrical & Electronic Materials
• /
• v.11 no.11
• /
• pp.28-36
• /
• 1998

Widely tunable diodes integrated with periodically sampled and chirped DBR(distributed Bragg reflector) and an EA(electroabsorption) modulator are analyzed dynamically using the improved largesinal time-domain model. The tuning characteristics of sampled- and chirped-grating DBR laser diodes are demonstrated theoretically. The results of the simulation agree well with those of the experiment. And the intensity-modulation properties of the laser diodes integrated with an EA modulator are calculated. It is shown that the external modulation has the lower frequency chirp by 1/20 for the same extinction ratio than the direct modulation, and also the short pulse train can be generated using the optical gating of an EA modulator.

• Journal of the Optical Society of Korea
• /
• v.3 no.2
• /
• pp.51-54
• /
• 1999

A Nd:YLF laser has been actively mode-locked at the third-order harmonic cavity frequency using a lithium niobate phase modulator. Self-oscillating pulses of 14 ps duration, 1 GHz repetition rate, and 10mV average power at 1053 nm wavelength have been obtained. A 1GHz rf signal to drive a phase modulator was obtained by using 1GHz pulse train without rf synthesizer as a driver of an active mode locker.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1779-1792
• /
• 2009

Now, the goal of the third generation KTX project is to create a new species of high speed train in order to open a new era of high speed railway system in history by authentic Korean technology and innovative design. Now the third generation KTX, must go beyond the original stagnant paradigm and be positioned as an emotional resource which is creating a shift in the public's perspective of transportation and expanding the idea that transportation intersects the two distinct realms of culture and environment as well. In addition, the overall design should reflect the Korean culture and characteristics, simple yet resonant, both the interior space and the exterior fuselage should portray the dynamic heritage of Korea such as the powerful yet subdued energy of Jung Joong Dong. In short, through the symbolic key words in Korean, Dong(Dynamics), Mek(Pulse), Ryu(Flow), Gam(Sensibility), the third generation KTX design project aims to create an new identity of Korean high speed railway which can stand globally.