Browse > Article

Surface Encoder Based on the Half-shaded Square Patterns (HSSP)  

Lee, Sang-Heon (School of Mechanical Engineering, Andong National University)
Jung, Kwang-Suk (Department of Mechanical Engineering, Chungju National University)
Park, Eui-Sang (CNFO Co., Ltd.)
Shim, Ki-Bon (Department of Mechanical Engineering, Chungju National University)
Publication Information
International Journal of Precision Engineering and Manufacturing / v.9, no.3, 2008 , pp. 82-84 More about this Journal
Abstract
A surface encoder based on the Half-shaded square pattern (HSSP) is presented. The HSSP working as reference grid is composed of the straight lines which are easy to be fabricated and make measuring time short. Since the periodic cell is separated in ON/OFF by the $45^{\circ}$ straight line, the duration from the starting point of scanning to the first rising edge and the duty cycle of the pulse train vary with respect to the position of the starting point. And the relationship between X and Y position and the duration, and duty cycle is described in the simple linear equation. Therefore, it is possible to measure X and Y position with the measured duration and duty cycle without calculating load. Through the test set-up, the feasibility of the proposed surface encoder was verified. Also the future works for improvement of performance were suggested.
Keywords
Surface encoder; Reference-based displacement sensor; Grid pattern; Planar motion;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
Times Cited By Web Of Science : 1  (Related Records In Web of Science)
Times Cited By SCOPUS : 1
연도 인용수 순위
1 Holmes, M., Hocken, R. and Trumper, D. L., "The long-range scanning stage: a novel platform for scanned-probe microscopy," Precision Engineering, Vol. 24, No. 3, pp. 191-209, 2000   DOI   ScienceOn
2 Gao, W., Dejima, S., Yanai, H., Katakura, K., Kiyono, S. and Tomita, Y., "A surface motor-driven planar motion stage integrated with an XY$\theta$z surface encoder for precision positioning," Precision Engineering, Vol. 28, No. 3, pp.329-337, 2004   DOI   ScienceOn
3 Gao, W., Dejima, S., Shimizu, Y. and Kiyono, S., "Precision measurement of two-axis positions and tilt motions using a surface encoder," Ann. CIRP, Vol. 52, No. 1, pp.435-438, 2003   DOI   ScienceOn
4 Kimura, A., Gao, W. and Kiyono, S., "Design and construction of a surface encoder with dual sine-grids," International Journal of Precision Engineering and Manufacturing, Vol. 8, No. 2, pp.20-25, 2007   과학기술학회마을
5 Bala, K. J., Wu, L. and Lennie, E. N. L., "Long Range and High Axial load capacity noanopositioner using single piezoelectric actuator and translating supports," International Journal of Precision Engineering and Manufacturing, Vol. 8, No. 4, pp. 3-9, 2007   과학기술학회마을
6 Gao, W., Araki, T., Kiyono, S., Okazaki, Y. and Yamanaka, M., "Precision nano-fabrication and evaluation of a large area sinusoidal grid surface for a surface encoder," Precision Engineering, Vol. 27, No. 3, pp. 289-298, 2003   DOI   ScienceOn
7 Kim, W. J. and Trumper, D. L., "High-precision magnetic levitation stage for photolithography," Precision Engineering, Vol. 22, No. 2, pp.66-67, 1998   DOI   ScienceOn
8 Jung, K.S. and Baek, Y. S., "Precision stage using a non-contact planar actuator based on magnetic suspension technology," Mechatronics, Vol. 13, No. 8-9, pp.981-999, 2003   DOI   ScienceOn
9 Gao, W., Huang, P. S., Yamada, T. and Kiyono, S., "A compact and sensitive two-dimensional angle probe for flatness measurement of large silicon wafers," Precision Engineering, Vol. 26, No. 4, pp.396-404, 2002   DOI   ScienceOn
10 Lee, S. H., "A magnetic suspension stage based on the switched reluctance propulsion principle," Trans. KSME A, Vol. 30, No. 6, pp. 622-630, 2006   과학기술학회마을   DOI