• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.59-64
• /
• 2024

The small tracking radar randomly changes the transmission period to avoid deceptive signals such as RGPO (Range Gaet Pull Off) operated on the target. Since the code repeats after a specific section, it becomes difficult to avoid a deceptive signal when the repetition is exposed. In this paper, a more realistic transmission pulse code is generated by adding random code generation through FPGA and system white noise. We present the research results of code generation that generates PRF that can avoid repetition while using pseudo-random code in EPROM using FPGA. Also, the result of designing random PRF pulse was confirmed by applying it to tracking radar.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.95-100
• /
• 2006

The pulse compression technique using Linear FM signal is commonly used for improving the performance of both the detection range and range resolution in radar system. In general, the compressed LFM waveform has relatively large sidelobe level which may prevent a target from being detected when strong jammer or clutter signal is near the target signal. In this paper, we propose a new weighting method which uses the square-root weight to suppress the sidelobe level. Typical applications are missile seekers and tracking radar systems where target tracking range is available prior to the signal processing. By computer simulation, we show that the performance of the proposed method is better than that of the conventional weighting methods in terms of sidelobe suppression.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.179-185
• /
• 2005

This paper presents a novel circuit topology of a high efficiency single-phase power conditioner. This power conditioner is composed of time-sharing sinewave absolute pulse width modulated boost chopper with a bypass diode in the first power processing stage and time-sharing sinewave pulse width modulated full-bridge inverter in the second power processing stage operated by time-sharing dual mode pulse pattern control scheme. The unique operating principle of the two power processing stage with time-sharing dual mode sinewave modulation scheme is described with a design example. This paper proposes also a sinewave tracking voltage controlled soft switching PWM boost chopper with a passive auxiliary edge-resonant snubber. The new conceptual operating principle of this novel power conditioner related to new energy utilization system is presented and discussed through the experimental results.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.11
• /
• pp.512-515
• /
• 2003

This paper is to investigate how partial discharge pulse signal can flow in 6.6㎸ motor stator windings. Pulse propagation is experimentally analyzed in stator windings using a variety of frequency-domain techniques. The experiments were performed on two stator windings in the laboratory. Spectrum analyzer(9KHz to 3㎓) with tracking generator(100kHz to 3㎓) was used. Sweep time of the tracking generator was looms. The frequency spectrum of the response signal was detected by active FET probe(1㎓). The active FET probe has a flat amplitude response up to 1㎓ without high frequency attenuation. The stator winding acts as a low-pass filter below 600KHz, the high-frequency components being highly declined. The resonance peaks show about 1.1MHz and 2MHz in low frequency of No. 1 and No. 2 stator windings, respectively. This low-frequency range indicates that attenuation is low. The peaks of partial discharge magnitude show about 900MHz, 1.6MHz in No. 1 stator winding and about 800KHz, 1.4MHz in No. 2 stator winding.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.304-307
• /
• 2004

Satellite orbit determination using angles only data from single ground station is carried out. The KOMPSAT-1 satellite mono-pulse angle tracking data from 9-meter S-band antenna at KARI site in Daejeon are used for the orbit determination. Various angle tracking arcs from one-day to five-day are processed and the orbit determination results are analyzed. Antenna pointing data are predicted based on the orbit determination results to check the possibility of re-acquisition and tracking of the satellite signal. Normal satellite mission operations including orbit determination, antenna prediction, satellite re-acquisition and automatic tracking from predicted antenna angle pointing data are concluded to be possible when three-day angle tracking data from single tracking station are used for the orbit determination.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.2
• /
• pp.192-199
• /
• 2000

This paper describes a Phase-Shift Pulse Modulation(PSPM) and Frequency Trad이ng Pulse Modulation(FTPM) s series resonant high-frequency inverter using IGBT for the power control of high-frequency induction heating u using Neuro-Fuzzy, which is practically applied for 20kHz~500kHz induction-heating and melting power supply in i indust껴aJ fields. The adaptive frequency tracking based on the PSPM(phase-shifting pulse modulation) r regulation scherne is presented in or$\tau$ler to l11lmmlZe svvitching losses. The trially-produced breadboards using N Neuro Fuzzy controller are successfully demonstrated cUld cliscussed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.2
• /
• pp.203-210
• /
• 2005

A study on the hybrid micro power source for the IMT2000 application has been presented. The hybrid micro power source is composed of solar cell, super-capacitor and battery. To compensate for the pulse loader of the IMT2000 application, the super-capacitor is connected through the lithium-lon battery to absorb the pulse discharge current. The solar cell provides the additional current to compensate for the depleted current and it is controlled to operate at the maximum power point voltage. A novel maximum power point tracking method is presented to operate at the pulse discharge load conditions and verified to have superior tracking performance through experiment. The controller design for the hybrid micro power source has been presented and verified through experiment.

• Korean Journal of Oriental Medicine
• /
• v.16 no.3
• /
• pp.33-44
• /
• 2010

Pulse diagnosis is considered one of the most important diagnostic methods in traditional Korean medicine. Nonetheless, there have been troubles of using pulse diagnosis practically, for the lack of its differential standards and standardized terminology. Rapid pulse belongs to the several traditional pulse types. Rapid pulse was first mentioned in the chinese medical book Haungdineijin that matched it to the fever as well as yang in the human body. Meanwhile, chinese doctors in Ming Ching dynasty of China suggested that rapid pulse meant more of the yin, cold-related reaction than yang and fever. In this study, we organized the past arguments of the rapid pulse and went back tracking what biological activities could be possibly linked to the rapid pulse. Thus, we figured out that the inflammatory mechanism has a close connection with the rapid pulse. The definition of the rapid pulse in Haungdineijin was indicating the acute inflammatory response, while in Ming Ching dynasty, it indicated the chronic inflammation. This is the deficiency-excess pattern of the rapid pulse. Furthermore, we discussed the nonexpression pattern of the rapid pulse which could be happened in case of the heat stroke, etc.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.4
• /
• pp.37-43
• /
• 2011

Lunar exploration program has been prepared with the aim of launch in the 2020's. As part of it, a lunar lander demonstrator has been developed which is the model for verifying all the system, such as structure, propulsion and control system before launch to deep space. After verifying all the system, the demonstrator will be evaluated by flight test. This paper deals with path tracking controller based on thrusters for the demonstrator. For this, first we derive equations of motion according to the allocation of thrusters and design the path tracking controller. The signal generated from the controller is continuous so PWPF(Pulse-Width Pulse-Frequency) modulator is adopted for generating on/off signal. Finally MATLAB simulation is performed for evaluating the path tracking ability and the final landing velocity.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.2 s.25
• /
• pp.77-86
• /
• 2006

Usually, a tracking-gate of the tracker is used to track the target radar signal in the active ECM system. In this paper, we propose the feed-back tracking-gate filtering method. The designed method applies a tracking-gate of the tacker to the ECM system's receiver as a rejection or pass filter selected by the receiver's purpose, and the specific target signals can be passed or rejected though this tracking-gate filter. Thus, the number of input signals within the receiver's search band is minimized owing to this filter except the target signals. In conclusion, the EW equipment's reaction time can be reduced and the error value about the target signals can be lower than the previous methods'.