• 대한전자공학회논문지SP
• /
• 제43권6호
• /
• pp.105-112
• /
• 2006

ES 시스템에서 레이더를 식별하는 능력을 향상하기 위해서는 주파수, 펄스반복주기 및 펄스폭 등과 같은 기본 식별변수 이외에 스캔특성을 추정하는 기법이 필요하다. 본 논문에서는 원형스캔 레이더의 스캔특성인 스캔주기와 스캔빔폭을 추정하는 방법을 제안하였다. 제안된 방법은 주기함수의 자기상관관계 특징을 이용하여 스캔주기를 추정한다. 그리고 제안된 스캔주기추정기법과 선형 보간법을 이용하여 스캔빔폭을 추정한다. 제안한 방법의 성능을 입증하기 위해 다양한 모의신호에 대한 실험결과를 제시하였다.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.70-72
• /
• 2018

We propose a microwave signal generation system for brain stimulation. The existing brain stimulation system uses a signal of several tens of kHz, and the magnetic field distribution is wide. Microwave is used to locally limit the distribution of the electromagnetic field and to change the action potential of the cell with less power. The switch modulates the microwave signal to obtain a pulse envelope. The action potential of the cell can be controlled to the excitation/inhibition state by adjusting the repetition frequency. These results are confirmed by measuring the cell potential of the mouse brain.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.1071-1079
• /
• 2010

This paper describes the design and fabrication of a high-efficiency GaN HEMT(Gallium Nitride High-electron Mobility Transistor) Pallet power amplifier module for S-band phased array radar applications. Pallet amplifier module has a series 2-cascaded power amplifier and the final amplification-stage consists of balanced GaN HEMT transistor. In order to achieve high efficiency characteristic of pallet power amplifier module, all amplifiers are designed to the switching-mode amplifier. We performed with various PRF(Pulse Repetition Frequency) of 1, 10, 100 and 1000Hz at a fixed pulse width of $100{\mu}s$. In the experimental results, the output power, gain, and drain efficiency(${\eta}_{total}$) of the Pallet power amplifier module are 300W, 33dB, and 51% at saturated output power of 2.9GHz, respectively.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권3호
• /
• pp.96-100
• /
• 2004

The Nd： YAG laser is commonly used throughout many fields such as accurate material processing, IC marking, semiconductor annealing, medical operation devices, etc., due to the fact that it has good thermal and mechanical properties and is easy to maintain. In materials processing, it is essential to vary the laser power density for specific materials. The laser power density can be mainly controlled by the current pulse width and pulse repetition rate. It is important to control the laser energy in those fields using a pulsed laser. In this paper we propose the constant-frequency current resonant half-bridge converter and monitoring of capacitor charging voltage. This laser power supply is designed and fabricated to have less switching loss, compact size, isolation with primary and secondary transformers, and detection of capacitor charging voltage. Also, the output stabilization characteristics of this Nd： YAG laser system are investigated. The test results are described as a function of laser output energy and flashlamp arc discharging constant. At the energy storage capacitor charges constant voltage, the laser output power is 2.3％ error range in 600[V].

• 한국항해학회지
• /
• 제3권1호
• /
• pp.47-77
• /
• 1979

A microwave Navigational Aid system is suggested suitable for fishing boats too small to be equipped with Radar or Radio-Direction-Finder. The system proposed here is similar to that of Talking-Beacon developed in Japan, but the distinctive modification proposed is that an increase of sixteen times in peak transmitting power, thus an accompanying increase of coverage, is achieved with the same mean transmitting power as that of Japan without sacrificing the clearness of azimuth information, by adopting a pulse repetition modulation instead of pulse width modulation as in Japan system. An experimental land station transmitter of transmitting frequency of 9, 370MHz and of peak power of 35kw with a microwave beam of 1 degree in horizontal width and 7 degrees in vertical width rotating once every three minutes, and also an experimental receiver of 20-dB in sensitivity and of an assumed cost of 100 dollars, operated by a 12 volts battery source are made, and the sail test results are reported showing that a bearing infromation of an accuracy of within two degrees can be obtainable every three minutes at a distance of as far as 24 miles from the transmitter if the transmitter is located as high as 100 meters above sea-level.

• 한국광학회지
• /
• 제9권4호
• /
• pp.270-273
• /
• 1998

본 연구에서는 능동형 모드록킹 방식을 이용하여 10 GHz의 고반복률을 가지는 초단펄스 광섬유 고리형 레이저를 제작하였다. 레이저 공진기의 모든 부분을 편광유지 광섬유로 구성하여 편광변화에 의한 불안정성이 없는 비교적 안정된 펄스를 얻을 수 있었으며, 투과 대역폭 2.4 nm의 파장가변 필터를 공진기 내부에 삽입하여 발진파장을 1530 nm에서 1560 nm 까지 조절할 수 있었고, 0.4 nm 파장 선폭과 8 psec 펄스폭, 그리고 1.2mW평균출력을 갖는 펄스를 발생시킬 수 있었다. 또한, 여기광의 세기에 따른 relaxation oscillation 주파수 변화를 측정함으로써 레이저 공진기의 손실을 알 수 있는 방법을 제안하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1874-1875
• /
• 2004

A high rate deposition sputtering process of magnesium oxide thin film in oxide mode has been developed using a 20 kW unipolar pulsed power supply. The powersupply was operated at a maximum constant voltage of 500 V and a constant current of 40 A. The pulse repetition rate and the duty were changed in the ranges of 10 ${\sim}$ 50 kHz and 10 ${\sim}$ 60 %, respectively. The deposition rate increased with increasing incident power to the target. Maximum incident power to the magnesium target was obtained by the control of frequency, duty and current. The deposition rate of a moving state was 9 nm m/min at the average power of 1.5 kW. This technique is proposed to apply high through-put sputtering system for plasma display panel.

• 한국군사과학기술학회지
• /
• 제5권3호
• /
• pp.45-55
• /
• 2002

중거리 유도무기 체계가 탄도탄과 같이 기동이 심한 표적과 교전할 때에는 지상 레이더는 표적 및 유도탄 위치정보를 보다 빈번하게 전송하여야 하지만, 자신의 임무를 수행해야 하므로 유도탄 및 교전 표적에 대한 정보를 필요이상으로 자주 전송할 수 없다. 이러한 상황에서 탐색기가 자체적으로 표적의 거리, 속도, 방향을 측정함으로서 지상레이더에 추가 부담을 지우지 않고 우수한 추적 정밀도로 교전성능을 향상할 시킬 수 있는 고반복 펄스열을 사용하는 PRF 변조방식을 제안한다.

• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.119-128
• /
• 1995

We report hybrid and passive mode-locking results of tilted-stripe AlGaAs semiconductor laser traveling wave amplifiers with saturable absorbers. Dependence ofthe pulse width on the mode locking frequency, the bandwidth of spectral filters, and the bias current of the laser amplifier are investigated. We generate 4 ps optical pulses by using the hybrid mode locking technique. The repetition rate and the peak power of generated pulses are 516 MHz and 170 mW, respectively. The tuning range of uor mode locked laser is 10 nm with the center wavelength of 780 nm. We also generate 2.6 ps optical pulses with peak power of 830 mW by using the passive mode locking technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1816-1818
• /
• 1997

A triggered sparkp gap switch was fabricater and its high-voltage discharge characteristics were studied. The switch is composed of two main electrodes and one trigger electrode which is placed perpendicular to the main one. Spark gap distance was fixed by 25 mm. This device has been operated without self firing at the pulse repetition frequency from 1 to 20 Hz limited by the charging current, and the hold-off voltage from 10 to 30kV. An IGBT switch and igniter coil (originally used in a car) were adopted for a trigger circuit. In this article preliminary switch characteristics of the spark gap switch are reported with the emphasis on the description of the trigger circuit.